







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWalk-In Shower Installation in Richmond, CA
A walk-in shower installation in Richmond typically runs $4,200 to $11,500 for a full tear-out and rebuild, or $1,800 to $3,800 for a curbless conversion over an existing shower footprint. Most single-bathroom projects finish in 5 to 9 working days once materials are on site. We install curbless and low-threshold showers for Richmond homeowners who are done stepping over a tub wall, planning for mobility needs, or replacing a leaking 1960s tile stall in a North & East bungalow or a Point Richmond cottage.
Groundwork Construction Co. of Richmond comes at this from the framing and waterproofing side, not the showroom side. A walk-in shower is only as good as what’s behind the tile: the slope, the pan, the membrane, the blocking for a future grab bar. Get those wrong and you’re back to a soggy subfloor in three years. Every install is covered by our 730-Day Done Right Promise, so if it’s not done right, we make it right. Your call is answered by a live person 24/7, and every technician arrives background-checked and in uniform.
This work sits inside our larger Bathroom Remodeling department, and most shower projects are part of a wider bathroom update. To see how a shower fits into a full rebuild of the space, start with our Bathroom Remodeling in Richmond page. Ready for a number? Call (833) 700-4611 for a free project estimate.
Key Takeaways
- A standard walk-in shower install in Richmond runs $4,200 to $11,500; a curbless conversion over an existing footprint runs $1,800 to $3,800.
- Most projects finish in 5 to 9 working days after materials land.
- Waterproofing and pan slope decide whether the shower lasts. We document both.
- Upfront pricing, 0% financing for 18 months, and $1,000 off projects over $10,000.
- The 730-Day Done Right Promise covers the workmanship on every install.

When You Need Walk-In Shower Installation
Richmond’s housing stock has a way of telling you when a shower needs replacing. The pre-war and mid-century homes on the flatlands were often plumbed for a tub and a hand-held shower head, not a modern glass enclosure, and the original drains and pans are at or past their service life. Here’s what we see most often.
- The tub wall is a daily obstacle. A parent recovering from knee surgery, an aging resident in the Richmond Annex, or a grandparent who visits often – if getting over a 15-inch tub apron has become a hazard, a curbless or low-threshold shower turns the bathroom back into something safe to use alone.
- You’re reworking the whole bathroom and the tub has to go. When a Richmond homeowner is already replacing the vanity, floor tile and toilet, the shower is the piece that decides the layout. A walk-in frees up floor space and makes a 5×7 hall bath feel usable for two people.
- There’s a soft spot in the floor or a musty smell that won’t leave. In older Richmond homes, we regularly find failed pan liners under original tile – the grout looks fine, but water has been getting behind it for years. A soft subfloor around the drain is the tell.
- Water damage is spreading into the room below. A ceiling stain under a second-floor bathroom or peeling paint on the wall behind the shower usually means the waterproofing has failed. Stop using it and get it looked at.
- The existing stall is dark, narrow or closed-in. A lot of Richmond bathrooms have a small shower tucked into a corner with a heavy curtain. Swapping to a glass walk-in with proper lighting makes the room feel twice its size for modest added cost.
- You want to age in place. A shower with a low threshold, blocking for grab bars and room for a bench lets you stay in your Richmond home through the years that matter.
Our Walk-In Shower Installation Process
We don’t guess at what’s under a shower. The plan below is the sequence we follow on a Richmond install, and you’ll know where your project sits at every stage.
- Site visit and measurement. We measure the existing footprint, check the subfloor and plumbing, and confirm whether the drain can be moved for a curbless build. That walk-through also produces your written, upfront price – the number you see is the number you pay.
- Design and material selection. We help you pick tile, glass, fixtures and a shower door that fit your budget and your Richmond bathroom’s dimensions. You choose from a curated set of trusted brand partners rather than whatever’s on the shelf.
- Demo and structural check. We remove the old tub or shower, pull the tile and pan, and inspect the framing, subfloor and drain. If we find rot or a failed floor joist, we stop and tell you before we go further – no hidden surprises buried in the final bill.
- Rough-in plumbing and waterproofing. We set the drain, slope the pan to code, and build the waterproofing that makes the whole job last: a bonded membrane or a molded pan with a proper pre-slope behind the tile. For a curbless shower we build the right transition to the surrounding floor.
- Tile, glass and finishes. We set tile, install the glass panel or door, and hang the fixtures – valve, shower head, and any hand-held or bench. We use quality hardware from names like Mr-Glass for a clean, solid enclosure.
- Final walkthrough and cleanup. We run water, check every drain and slope, confirm the door seals, and walk you through the finish. Then we clean up and leave you a bathroom that’s ready to use that day. All of it sits under the 730-Day Done Right Promise.

Walk-In Shower Installation Pricing in Richmond
Walk-in shower installation in Richmond runs $4,200 to $11,500 depending on size, materials and how much plumbing has to move. A curbless conversion that reuses the existing drain and footprint is the lower-cost path at $1,800 to $3,800. A full tear-out and rebuild with new tile, glass and a relocated drain is the higher end. We quote upfront and put it in writing, then finance it with 0% for 18 months plus $1,000 off projects over $10,000.
Here’s how the money usually breaks down on a Richmond install:
| Scope | Typical range |
|---|---|
| Curbless conversion, existing footprint | $1,800 – $3,800 |
| Standard walk-in, tear-out and rebuild | $4,200 – $7,500 |
| Large walk-in with bench and glass enclosure | $7,000 – $11,500 |
| Plumbing relocation (drain or valve move) | $600 – $1,800 |
| Tile and glass upgrades (frameless, large-format) | Included to +$2,500 |
What moves the price most: whether the drain has to move, the size of the enclosure, glass style (a standard framed door costs far less than a frameless panel), tile choice, and what we find behind the wall once the old tile comes off. Old Richmond homes sometimes need the subfloor repaired or the framing sistered, and we price that as a line item so you see exactly what it’s for.
Our home page lists every service line, and the Bathroom Remodeling in Richmond guide shows how a shower fits into a full-room budget. For an exact number on your Richmond bathroom, call (833) 700-4611 – the estimate and design consult are free.
Why Richmond Homeowners Pick Groundwork for a Walk-In Shower
We’ve been building in the Richmond market since 2014, and the homes here teach you things a generic install manual doesn’t. Older houses, tight lots, and a mix of plumbing vintages mean we plan for the unexpected. Our technicians have up to 12 years of experience on showers, pans and tile, and we hold the workmanship behind it in writing with the 730-Day Done Right Promise – built to last, backed in writing.
You get a live person on the phone 24/7, background-checked and uniformed technicians on every project, and pricing you can read before anyone swings a hammer. When a job calls for glass, we use brands like Mr-Glass and Therma-Tru to get a solid, well-fitting enclosure rather than a stock panel that squeaks. Full-scope work from demolition to final walkthrough means one contractor owns the result, from foundation to finish line.
If your project grows beyond the shower – a full bathroom remodel, a kitchen update, or a home addition, we handle all of it under the same guarantee. Explore our broader Richmond bathroom remodeling service when you’re ready to scope the whole room.
FAQs – Walk-In Shower Installation
How much does walk-in shower installation cost in Richmond?
Walk-in shower installation in Richmond runs $4,200 to $11,500 for a full tear-out and rebuild, and $1,800 to $3,800 for a curbless conversion over an existing footprint. The final number depends on enclosure size, glass and tile choices, and whether the drain has to move. Call (833) 700-4611 for a free, upfront estimate.
Can you install a walk-in shower in one day?
No – a proper walk-in shower installation takes several days in Richmond, not one. Most installs finish in 5 to 9 working days once materials arrive, because the waterproofing and pan have to cure and set correctly before tile goes on. A rushed job is where leaks come from.
Do I need a permit for a walk-in shower in Richmond?
Most walk-in shower installs in Richmond that move plumbing, change a drain, or alter the framing require a permit, and the exact requirements depend on the scope. We handle the permit process and inspection as part of the project and tell you up front what’s needed before we start. Call (833) 700-4611 and we’ll walk you through your specific case.
Is a walk-in shower better for a small Richmond bathroom?
Often, yes – a walk-in shower can make a small Richmond bathroom feel larger because glass opens up sightlines and frees floor space a tub used to take. The trade-off is you lose the tub, so it’s the only bathroom, think carefully. A low-threshold or curbless design also improves safety for households with mobility needs.
How long does a walk-in shower last?
A properly waterproofed walk-in shower installed over a solid, correctly sloped pan will last 20 years or more before the tile or membrane needs attention. What determines that lifespan is the prep work behind the tile, not the tile itself – which is exactly what our 730-Day Done Right Promise is there to cover.
Can you repair or replace just the shower, or do I need a full bathroom remodel?
You can replace just the shower – a shower-only install is a common Richmond project and doesn’t require a full bathroom remodel. It’s usually cheaper to replace the shower on its own unless the vanity, floor or electrical are also failing. Call (833) 700-4611 and we’ll tell you which path makes sense for your bathroom.
Call (833) 700-4611 for a free walk-in shower estimate in Richmond. A live person answers 24/7, we’ll walk you through the scope and price upfront, and you’ll get $1,000 off projects over $10,000 with 0% financing for 18 months available. From foundation to finish line, the whole job is backed by the 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co. of Richmond, serving Richmond.


