







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterIron Fence in Richmond, CA
An iron fence is a welded or wrought-metal barrier built from steel or iron pickets, rails and posts, and in Richmond it’s the go-to choice when a homeowner wants a boundary that’s secure, long-lived and adds real curb value at the same time. If you’re weighing a fence that will outlast wood by decades, hold its finish through Bay Area salt air and stand up to coastal wind, iron is the material to beat. At Groundwork Construction Co. of Richmond, we install iron fencing from foundation to finish line, backed by our 730-Day Done Right Promise. Call (833) 700-4611 and a live person answers, day or night, to set up a free estimate.
Iron gives you something wood and vinyl can’t: a genuine security barrier that also reads as craftsmanship. Around here that matters. Our technicians have up to 12 years of experience, arrive background-checked and in uniform, and quote you upfront pricing, no surprises. When you’re ready to look at the bigger picture, our Fence Installation page covers the full range of materials and layouts we handle.
Key Takeaways
- Iron fencing in Richmond runs roughly $35 to $70 per linear foot installed, depending on height, style and grade.
- Iron is the right call for security, slope tolerance and salt-air durability; it’s the wrong call for the lowest possible budget.
- Every job is covered by the 730-Day Done Right Promise and comes with a free project estimate and design consult.
- 0% financing for 18 months and $1,000 off projects over $10,000 are standing offers, not limited-time gimmicks.
- We answer the phone live 24/7. No voicemail black hole.
Richmond’s mix of climates all hits a fence. Homes in the Richmond Hills sit on wind-blasted ridges where wood pickets loosen; houses in the Point Richmond flats deal with marine moisture that rots untreated posts in a few winters; and the older lots in the Iron Triangle and North & East sit on clay soils that heave with the wet-dry seasons. Iron handles all three better than soft wood. That’s why we install it here, and why we take the time to talk you through the material before you commit.

When You Need Iron Fence
Choosing iron is mostly about the job the fence has to do. Here’s when it’s the right material and when it isn’t.
- You want real security, not a visual suggestion. A properly anchored iron fence with a locking gate is a genuine physical barrier. In Richmond’s denser neighborhoods, a tall iron run along the back property line is a common way to close off a rear alley or side yard.
- Your yard isn’t flat. Iron fence panels are built to rack and follow grade. Sloped lots in the Richmond Hills and El Sobrante edges are far easier to fence in iron than in wood, because you don’t have to step panels into terraced chunks.
- You’re near the water. Salt air eats untreated wood and can chalk cheap vinyl. A properly primed and finished iron fence stands up to the marine air in Point Richmond and Marina Bay for decades.
- You need a boundary that lasts. If you’re fencing a corner lot and you don’t want to redo it in ten years, iron is the long-horizon answer. That’s the “built to last, backed in writing” thinking behind the 730-Day Done Right Promise.
- Your HOA or a city review is involved. Some Richmond properties sit in design review or HOA oversight for front-yard fencing, and iron is a common, accepted style. We’ll flag the height and setback questions before we quote.
- You’re protecting a pool area. A locking iron fence around a backyard pool is a durable code-conscious choice, and we’ll walk the required height and self-closing latch requirements with you.
If any of those sound like your property, iron is likely the right pick. If you’re fence-shopping on a tight budget or want full privacy screening, wood or composite probably fits better, and we’ll tell you that straight. Call (833) 700-4611 and let’s sort it out.
Our Iron Fence Process
Fencing is not something to eyeball. Iron is heavy, it’s anchored in concrete, and once it’s set it’s fairly permanent. Here’s the process we follow on every Richmond job.
- On-site consult and measurement. We walk the property line, confirm where the boundary actually sits (a survey or plat helps on older lots), measure the run, and check for grade changes, tree roots, irrigation lines and buried utility runs. We quote you a free project estimate and design consult at this stage, before any material is ordered.
- Material and style selection. We talk through iron gauge, picket spacing, height, post style and the finish system. Thicker gauge means a stiffer panel and better security; decorative picket tops and scrollwork are available, and finish quality is what determines how long the fence resists rust.
- Permits and HOA review. We check what the City of Richmond requires for your fence height and location, and help you prepare what your HOA needs if there’s an architectural review. Iron work at the height and weight we install usually involves permits, and we handle the paperwork.
- Layout and hole prep. We mark every post location with the right spacing and confirm setbacks. Posts are set into concrete footings below frost line depth and lined up to the boundary, with clean excavation and no guessing.
- Post setting and panel installation. Posts cure, then panels are hung and leveled, gates are set with the correct clearance, and hardware is installed. We check every gate for a clean swing and every latch for a positive close before we call the job done.
- Finishing and walkthrough. We touch up the finish at any install points, clean up debris, and walk the finished fence with you. You sign off when it’s right. That walkthrough is the moment the 730-Day Done Right Promise starts.
No-hassle upfront pricing means the number on the quote is the number you pay. If a surprise comes up on site, like a buried utility or a rotten existing footing, we tell you before we touch it instead of after.

Iron Fence Pricing in Richmond
Iron fence installation in Richmond typically runs from about $35 to $70 per linear foot installed, including posts, concrete footings, panels and standard hardware. A basic 4-foot picket run on flat ground lands at the low end; taller, heavier-gauge runs with decorative work and automated gates land higher. We quote the whole job upfront, so there are no line items added after the fact.
| Line item | Typical Richmond range |
|---|---|
| Standard 4 ft iron fence, installed | $35 – $55 per linear foot |
| Taller 5 – 6 ft security run, installed | $50 – $70 per linear foot |
| Decorative picket or scrollwork upgrade | $8 – $20 per linear foot |
| Manual walk gate, installed | $450 – $1,100 each |
| Automated or heavy security gate | Quoted per project |
| Removal and disposal of old fence | $5 – $12 per linear foot |
| Slope and grade work (racking panels) | $4 – $10 per linear foot |
What moves the number up or down: total run length, height, iron gauge, how much slope and grade the job involves, decorative detailing, gate type and whether the old fence needs hauling off. A long straight run on flat ground in North Richmond prices very differently from a short, gated run climbing a hill in the Richmond Hills. Longer runs bring the per-foot cost down because mobilization is spread across more footage.
Where a big project is concerned, our standing offers make iron fencing more accessible than the sticker price suggests: 0% financing for 18 months, plus $1,000 off projects over $10,000. If you’re fencing a full perimeter or adding a security gate, those two together can move the decision from someday to this season. Call us for an exact quote. Estimates are free, and the consult includes a design conversation so you’re comparing real numbers.
We also handle related exterior work in the same visit where it makes sense. If your iron fence ties into a driveway apron or a paver border, our Driveway & Pavers in Richmond service can coordinate the hardscape so everything lines up. And if your project also touches the front entry, we install entry doors in the same style family from makers like Therma-Tru, which pairs cleanly with iron at the walk gate.
Why Iron and Not Wood or Vinyl?
Iron wins on lifespan. A good iron fence installed on proper concrete footings with a quality finish will outlast a cedar fence by a wide margin, and it doesn’t need staining every two years. It wins on security. It wins on slope. It also tends to hold value at resale, because buyers read iron as permanent.
Where iron loses: it costs more up front, it’s heavier to install, and if the finish is poor you’ll deal with rust down the road. That’s why the finish matters as much as the metal. When you’re comparing bids, ask what primer and topcoat each one uses. The difference in finish quality is often the difference between a fence that lasts a generation and one that rusts at the welds in five years.
If your property also needs a full boundary rebuild or another material across part of the line, our Fence Installation page lays out the wood, vinyl and composite options side by side. We’ll pair the right material with the right part of the property, and won’t sell you iron where wood belongs.
Iron Fence Repair and Refinishing
Not every call is new construction. A lot of our Richmond fence work is on existing iron: straightening a leaning post, replacing rusted pickets, re-anchoring a footing that’s lifted with clay soil, or repainting a run that’s lost its finish. If your existing iron fence is structurally sound, repair and refinish often costs far less than replacement.
What we check on an existing fence:
- Post footings for heaved or cracked concrete, common on clay soils in the flats
- Welds and picket connections for hairline cracks
- Rust at ground level and at the finish break lines
- Gate sag and latch alignment
- Finish condition and how much prep a recoat will need
We’ll give you a straight answer on repair versus replace. If a fence has good bones, we’ll tell you that and quote a refinish. If it’s failing at the footings, we’ll tell you that too, with numbers to back it up.
Fencing Near Other Structures and Landscaping
One thing that comes up on older Richmond lots: mature trees, utility lines and landscape beds that sit right on the property line. A fence post that lands on a 40-year-old oak root will fail. A run that crosses an irrigation main is a headache waiting to happen. Our on-site measurement catches those before we dig, so we route around them or adjust spacing rather than cutting roots or hitting pipe.
We also coordinate with your other exterior work when it makes sense. If you’re replacing windows on the house at the same time you’re fencing the yard, brands like ES Windows and ECO Window Systems can be ordered and installed on a schedule that lines up with your fence timeline, so you’re not managing two crews with two different schedules. We can run the window and fence work under one project so the finish dates line up.
FAQs – Iron Fence
How much does an iron fence cost in Richmond?
Iron fence installation in Richmond typically costs $35 to $70 per linear foot installed, with most homeowners landing in the $45 to $60 range for a standard 4- to 5-foot run. Taller security runs, heavy decorative work and slope work push the number up; long straight runs bring the per-foot cost down. Call (833) 700-4611 for an exact quote. Estimates are free.
Can you install an iron fence on a sloped yard?
Yes. Iron fence panels are built to rack and follow grade, which is why sloped lots in the Richmond Hills and the El Sobrante edges are easier to fence in iron than in wood. Each post is set at its own height on the slope so the top rail flows in a clean line instead of stepping up and down. Call us and we’ll walk your yard and give you a real number.
How long does iron fence installation take in Richmond?
Most residential iron fence jobs in Richmond take one to three days from layout to walkthrough, depending on footage, slope and gate count. Larger perimeter jobs or jobs with automated gates can run a few days longer. Concrete footings need cure time before panels hang, so we schedule installation to account for that. Call (833) 700-4611 and we’ll give you a realistic timeline for your property.
Do I need a permit for an iron fence in Richmond?
Fence permits in Richmond depend on height, location and whether the fence is in a front yard, and some properties are also subject to HOA or design review. We check the requirements for your address and handle the paperwork as part of the job. That way there’s no surprise at inspection. Call us and we’ll confirm what applies to your lot.
Will an iron fence rust in the Bay Area salt air?
Not if the finish is right. Salt air accelerates rust on bare or poorly primed metal, so we install iron with a proper primer and topcoat system built for coastal exposure. Point Richmond and Marina Bay homes need more finish attention than homes deeper inland. We spec a finish for your location, not a one-size-fits-all coating. Call us to talk through finish options for your property.
Can you fix my existing iron fence instead of replacing it?
Often, yes. Re-anchoring lifted footings, straightening leaning posts, replacing rusted pickets and refinishing the run usually costs far less than a new fence and gets you years more life. We’ll inspect it and give you a straight repair-versus-replace answer with numbers. Call (833) 700-4611 to book an assessment.
Ready to Fence Your Richmond Property?
Iron fence work in Richmond is one of those jobs where the details decide whether you’re happy in ten years. Proper footings, correct gauge, a finish built for salt air and a crew that shows up on schedule: that’s the difference, and it’s what we bring. Every project comes with a free project estimate and design consult, 0% financing for 18 months, $1,000 off projects over $10,000, and the 730-Day Done Right Promise. Our technicians are background-checked and in uniform, and a live person answers the phone 24/7. Call (833) 700-4611 today and let’s get your fence on the schedule.
Written by the team at Groundwork Construction Co. of Richmond, serving Richmond.


