







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Concrete Driveways & Concrete Work in Richmond, CA: What It Costs and How Long It Takes
Concrete driveways and concrete work in Richmond typically run $4,500 – $12,000 for a new driveway pour, and most residential jobs take 3 – 5 working days from demo to final cure, with a full 28-day cure before you park on it. Replacing an old slab sits at $5,000 – $14,000 depending on how much base has to come out. For an exact number on your lot, call (833) 700-4611 and we’ll walk it with you.

How We Run a Concrete Job in Richmond, Day by Day

Concrete rewards patience and punishes shortcuts. Here’s the actual sequence, so you know what to expect and what we’ll be asking you to decide.
Stage 1: Walkthrough and layout (Day 1, about an hour)
We measure the run, check slope away from the garage and house, and look at what’s under the old surface. On Richmond lots this is where we find the surprises: a cracked old slab sitting on 2 inches of dirt instead of proper base, or a buried irrigation line nobody remembered. You decide the driveway width (10, 12, or 16 feet), the finish, and whether you’re adding a walkway or apron at the same time.
Stage 2: Demo and excavation (Days 1 – 2)
We break out the old concrete, haul it off, and dig down to the subgrade. A standard driveway needs 4 – 6 inches of compacted base under a 4-inch slab; where a truck or RV will park, that becomes a 5 – 6-inch slab with rebar. If the soil reads as fill – common on Richmond’s east side and waterfront lots – it may need over-excavation and replacement before anything gets poured.
Stage 3: Forming, grading, and inspection (Day 2 – 3)
We build forms, set the grade for drainage, install rebar or mesh, and get the inspection signed off if the job requires a permit. You confirm the layout on the ground before we pour. This is your last easy chance to move an edge two feet.
Stage 4: The pour and finish (Day 3 – 4)
We pour, screed, and apply the finish you chose – broom, exposed aggregate, or a light stamp. Control joints go in at 8 – 12 foot intervals so the slab cracks where we want it to, not across a wheel path. This is a half-day of work and a full day of watching it set.
Stage 5: Cure and protection (Days 4 – 28)
We cure the slab, keep traffic off it, and apply a sealer after the surface dries. Foot traffic after 24 – 48 hours; vehicles after 7 days for light cars, longer for anything heavy. Full cure takes 28 days, and we’ll tell you when each window opens.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Concrete Options You’ll Choose Between
Every choice below trades cost against how it looks and how it holds up in Richmond’s fog and wet winters.
- Standard broom finish: The value pick. Textured, slip-resistant, and the most forgiving in wet weather. It’s the baseline most Richmond driveways use, and it hides tire marks better than a smooth trowel finish.
- Exposed aggregate: We wash the top layer to expose the stone. Great grip and a warmer look, but it costs more and the rough surface collects a little more grime.
- Colored or stamped concrete: Integral color or a stamp pattern can mimic pavers or stone for a mid-range price. The trade-off is that a stamp takes more labor and a poorly done stamp reads plasticky up close. We’d rather pour a clean stamped apron than a whole runway of it.
- Slab thickness and reinforcement: 4 inches with mesh is fine for a car. 5 – 6 inches with rebar is what you want if a truck, trailer, or boat will sit on it.
- Base depth: Thin base is the number one reason driveways fail early. Proper compacted gravel isn’t glamorous, but it’s what keeps the slab from cracking.
Fiber-mesh additives and air-entrainment mixes matter more here than most places. Fog-belt moisture and freeze-thaw cycles in the East Bay stress concrete, and the right mix design helps it survive.
What Concrete Driveways & Concrete Work Costs in Richmond, CA
Plan on $4,500 – $12,000 for a new concrete driveway and $5,000 – $14,000 for a full replacement, with a small walkway or apron adding $1,000 – $3,500 depending on square footage. Here’s what pushes a job toward the low or high end:

- Size and square footage: A 16-foot-wide driveway costs noticeably more than a 10-foot one. This is the biggest single lever.
- Old slab removal: Thick, reinforced, or deeply buried concrete costs more to break out and haul.
- Soil condition: If the subgrade is fill or contaminated – a real possibility on Richmond’s former industrial land – testing and over-excavation add cost before we pour.
- Finish and thickness: Broom finish on a 4-inch slab is the value tier. Stamped or colored work and thicker reinforced slabs push toward the top.
- Permit scope: A simple replacement may not need a permit; new driveways or grading changes usually do, and the permit and inspection add time and fees.
A written estimate from us breaks out demo, base, slab, reinforcement, finish, and disposal as separate line items. What it won’t always include up front is soil testing or unpermitted-structure discovery – we flag those the moment we see them and quote them before any extra work starts. Upfront pricing, no surprises: the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Richmond Homes Specifically Do to This Job
Richmond’s soil and building stock shape concrete work in ways you won’t hit in El Cerrito or San Pablo. The city’s heavy-industrial legacy means swaths of former Kaiser Shipyards land and refinery-adjacent parcels carry contaminated soil, buried fuel tanks, and fill that can trigger a soil management plan and DTSC or Bay Area Air Quality permits. On the Point Molate and former naval waterfront, bay-mud fill and erosion turn a simple grade-and-pour into a site evaluation first.
Then there’s the housing. The 1910s – 1940s shipyard-worker bungalows in South Richmond and the Iron Triangle often hide unpermitted garage or bonus-room conversions, and a new driveway that changes grade or drainage near one of those structures can pull plan-check into the job. We’ve seen many a 1940s South Richmond bungalow where the “garage” was never properly permitted, and the soil beneath needs a look before we pour a slab against it. Fog-belt moisture from the bay also means we grade everything to shed water hard, away from the house, because wet winters here expose drainage problems fast on the low-lying flatlands. If your project widens into a bigger hardscape job, it’s often part of a full Driveway & Pavers in Richmond scope, and we cover that too.
Serving Richmond, CA – Our Local Coverage Area
We serve Richmond and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Concrete Driveways & Concrete Work in Richmond

A typical residential driveway is 3 – 5 working days for demo, prep, and pour, then 7 days before you drive on it and 28 days to full cure. Weather and soil conditions can extend prep. Call (833) 700-4611 for a timeline on your specific property.
Often yes. A straight replacement may not require one, but new driveways, grading changes, and work near unpermitted structures usually do. We pull the permits and handle inspections so it’s done right the first time. Call us to talk through your situation.
Usually yes. Most driveways sit clear of underground plumbing and the house itself. When we do find a buried line or a structure in the pour path, we flag it, quote the fix, and only proceed once you approve. No surprise change orders.
A full concrete driveway replacement runs $5,000 – $14,000 depending on size, old slab condition, and soil. Call (833) 700-4611 for an exact quote – estimates are free.
Yes. Every job carries our 730-Day Done Right Promise – if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in residential construction. Call (833) 700-4611 to schedule your free estimate.
If your concrete work is tied to a bigger backyard build or a new unit, homeowners often pair this with ADU Site Prep & Utilities in Richmond, and when a garage or entry door needs replacing around the new driveway, Door Installation in Richmond covers that. You can also look at our full Driveway & Pavers service if you’re still deciding between materials, and see everything we do across Richmond.
Get Your Free Concrete Estimate in Richmond
A cracked or failing driveway only gets worse through every wet winter, and doing it once beats patching it twice. Call (833) 700-4611 for a free on-site estimate on concrete driveways and concrete work in Richmond. A real person answers around the clock, we walk the property with you, and you get a written line-item quote. Our technicians bring up to 12 years of experience, and we back the work with our 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co.












