







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Richmond, CA: What It Costs and How It Holds Up
A chain link fence in Richmond, CA typically runs $3,500 to $9,000, and most residential yards are finished in two to four working days. That covers demolition of the old fence, new galvanized posts set in concrete, tension wire, and a walk-through at the end. The number moves with height, gauge, linear footage, and how much of the old footings have to come out. Call (833) 700-4611 for a free on-site estimate with a written line-item quote, and know that the number you see is the number you pay.

How the Job Actually Runs, Stage by Stage

Every chain link job we run in Richmond follows the same sequence. Here’s what happens and when, so you know what you’re paying for and what you’ll be asked to decide.
Stage 1: Site walk and line check (day 1, about an hour)
We walk the property line with you and confirm where the fence lands. That means checking for easements, buried irrigation, and low-voltage lighting before anyone swings a shovel. On Richmond lots near the bay flatlands, we also look at how the ground drains after winter rain, since a fence set in standing water rusts from the bottom up. You’ll decide the height and the run at this stage.
Stage 2: Mark and call 811 for utility locate (day 1 – 2)
Before any excavating, we call for a utility locate. Post holes for a chain link fence are shallow, but gas and electrical runs on older properties don’t always sit where you’d expect. This is a two-day wait on some schedules. You don’t have to do anything here, but don’t let anyone talk you out of it.
Stage 3: Demo and remove the old fence (day 1 – 2)
Old posts and concrete footings come out first. This is the stage that surprises people on price. A fence line with 15 buried footings, or one sunk into a former industrial fill lot, can add a half day of labor. We haul everything away and leave the line clear.
Stage 4: Set posts and frame (day 2 – 3)
Posts go in at 8-foot spacing for a standard residential run and 6 to 8 feet apart on taller or heavier commercial-gauge work. Each one gets concrete, plumb-checked, and left to cure. Top rail, tension wire, and the fabric go up once the posts are solid. This is where the gauge and coating you picked show up in the finished product.
Stage 5: Stretch, tension, and walk-through (day 3 – 4)
We tension the fabric, hang the gates, and walk the whole run with you. You’ll confirm gate swing, latch alignment, and that no fabric sags. Any adjustment happens before we leave. From here it’s covered by the 730-Day Done Right Promise: if it’s not done right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Make on a Chain Link Fence
This is the part most quotes skip. Here are the real decisions and how each one changes the result.
- Gauge of the wire. Residential chain link usually comes in 11.5 gauge and heavier commercial in 9 gauge. The thinner wire is lighter and cheaper but dents and sags sooner in a windy yard. The heavier gauge costs more per foot and holds its shape for a longer life.
- Coating. Galvanized steel is the baseline and holds up in most East Bay conditions. Vinyl-coated (green or black) costs a bit more, looks better against landscaping, and adds a layer against fog-belt moisture. In a bay-front yard, that coating earns its price.
- Height. Four feet is the standard for a residential boundary. Five and six feet give more privacy and security, but they cost more per foot and push you closer to needing a permit or HOA sign-off. You’ll want to know which before you commit.
- Gate type. A walk gate is a simple swing. A drive gate needs heavier posts and framing. Decide gate placement early, because moving it later means resetting concrete.
- Framework. Top rail and tension wire both add cost, but a run without them moves and sags. We recommend both on any fence longer than a short side-yard.
What a Chain Link Fence Costs in Richmond, CA
Most Richmond chain link projects land between $3,500 and $9,000, with the average residential yard in the middle of that range. Here’s what pushes a job toward one end or the other, plus what a written estimate should and shouldn’t cover.

- Linear footage. The biggest driver. A small side-yard run sits near $3,500; a full perimeter with a drive gate moves toward the top.
- Gauge and coating. Heavy 9-gauge with vinyl coating costs meaningfully more per foot than standard 11.5-gauge galvanized.
- Old fence removal. Buried footings and dense old fencing add demo labor and haul-away.
- Ground conditions. Rocky or fill-heavy soil slows post setting. On a former industrial parcel, it can add time.
- Gates and corners. Each gate and every corner post adds framing and labor.
A solid written estimate lists footage, gauge, coating, gate count, demo, and haul-away as separate lines. It also states whether permit fees are included. What it typically doesn’t include: utility locate wait time beyond the standard call, or repairs to landscaping along the line. It can. Just ask so the quote reflects it.
See the difference
Before
After
Before
After
Before
AfterWhat Richmond Homes Specifically Do to This Job
Richmond isn’t a generic East Bay fencing job. The city’s heavy-industrial legacy shapes the work. Contractors here routinely run into contaminated soil, buried fuel tanks, and fill soils on former Kaiser Shipyards and refinery-adjacent land. That means soil management plans and DTSC or Bay Area Air Quality permits come into play on some parcels, and neighboring cities like El Cerrito or San Pablo homeowners never deal with it. A chain link fence needs shallow post holes, so it’s often simpler than a foundation pour. But on an east-side lot, we still confirm what’s under the line before we dig.
The Point Molate and former naval waterfront is a second Richmond-specific layer, where erosion and bay-mud fill change how you set posts and frame the site. The housing stock adds its own wrinkles. We work on 1910s to 1940s shipyard-worker bungalows in South Richmond and the Iron Triangle, 1950s and 1960s stucco tract homes out in Parkview and Verde, and mid-century ranches on the Richmond Heights and El Sobrante fringe. On the older flatlands, a “garage” or “bonus room” is often a shipyard-era conversion, so anything that touches the property line can raise a permit question. Fog-belt moisture off the bay drives rust on south and west runs, and winter rains on the low-lying flatlands test every fence set near the water.
Serving Richmond, CA – Our Local Coverage Area
We serve Richmond and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Chain Link Fence in Richmond

A standard residential chain link fence in Richmond takes two to four working days from demo to walk-through. Rain, utility locate waits, or heavy footing removal can push that to a week. Call (833) 700-4611 for a timeline on your specific yard.
Height and location decide it. Most residential chain link at or under the standard height on a boundary line needs no building permit, but taller runs, corner-lot sightlines, and HOA rules can require one. We walk through what applies to your address before work starts, so there’s no surprise. Call for a straight answer on your property.
Yes. A chain link fence is a standalone job and doesn’t require opening walls, moving plumbing, or altering the structure. If an unpermitted older outbuilding sits near the line, we flag it so you know before plan check raises it. Call (833) 700-4611 and we’ll scope it in a free visit.
Most Richmond jobs run $3,500 to $9,000. That range covers footage, gauge, coating, gates, demo, and haul-away. Call (833) 700-4611 for an exact line-item quote. Estimates are free.
Our chain link work is backed by the 730-Day Done Right Promise. If it’s not done right, we make it right. That covers installation and workmanship, and your estimate spells out the terms in writing. Call for the full detail before you sign anything.
Ready to Price a Chain Link Fence in Richmond?
Call (833) 700-4611 to schedule a free on-site estimate. A live person answers around the clock, so you’re never stuck in a voicemail loop. We measure the run, check the line, and hand you a written quote with upfront pricing and no surprises, plus 0% financing for 18 months and $1,000 off projects over $10,000 if the full perimeter turns into a bigger scope. For the wider project this often becomes part of, see Fence Installation in Richmond, or start with our Fence Installation service. Homeowners often pair this with Door Installation in Richmond when the gate and outbuilding get a refresh, or ADU Site Prep & Utilities in Richmond when a backyard addition is on the drawing board. We cover all of Richmond and the surrounding East Bay.
Written by the team at Groundwork Construction Co.












