







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Vallejo, CA: What It Costs and What You Get
A chain link fence in Vallejo typically runs $3,500 – $9,000, depending on linear footage, height, gate count, and how much old fencing or concrete has to come out first. Most residential yards land in the 100 – 200 foot range and finish in one to two days once materials are on site. Call (833) 700-4611 for a free on-site estimate and a written line-item quote.

What matters more in Vallejo than the price is the metal itself. Salt-laden onshore wind off the Carquinez Strait goes after galvanized steel faster than it does thirty miles inland, and that’s the thing we plan around on every job here.
How We Build a Chain Link Fence in Vallejo, Step by Step

Good chain link work is a ground problem before it’s a steel problem. Here’s how a typical Vallejo job actually runs.
Stage 1: Site walk and line layout (day 1, 1 – 2 hours)
We walk the property line with you and confirm exactly where the fence sits. In the older flats of 94590, that often means digging out the original survey pins or finding them buried under decades of soil and ivy. You decide at this stage: fence height, gate locations, and whether the run pulls off an existing structure or stands free. Setbacks and property line disputes come up more than people expect, and it’s far cheaper to settle them before a single post hole is dug.
Stage 2: Demo and prep (day 1, 2 – 4 hours on most jobs)
Old fencing comes out, along with any concrete footings that are in the way. This is where surprises live. Vallejo lots in the older neighborhoods frequently have abandoned redwood posts set in chunked concrete, old irrigation lines running right down the property line, and sometimes shallow utilities that were never marked properly. We call for utility locating before we dig. If there’s an existing fence the neighbors share, you decide at this stage whether it comes out cleanly or gets worked around.
Stage 3: Post setting and cure (day 1, then overnight)
Posts go in at 8-foot spacing, set in concrete below the frost-depth-equivalent for our region. Terminal posts, corner posts, and gate posts get larger footings and heavier wall thickness because they carry the tension of the whole run. The concrete has to cure before we tension anything – we don’t rush that step no matter how small the fence. You decide here whether you want posts set deeper in a known soft spot, which happens on some of the filled ground near the waterfront.
Stage 4: Framework, mesh, and gates (day 2, 3 – 5 hours)
Top rail, tension wire, and mesh get stretched and tensioned, then gates are hung and checked for swing and latch. We tension by hand with a stretcher bar rather than pulling mesh tight with a truck – it holds longer and doesn’t distort the fabric. This is when you walk the line with us and flag anything that sits wrong.
Stage 5: Final walk and cleanup (day 2, under an hour)
We haul off old material, rake out disturbed soil, and walk the completed fence with you. Anything that fails a pull test, sags, or latches poorly gets corrected before we leave. The whole job is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. Our technicians bring up to 12 years of experience to this kind of work.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Chain Link Options: What You’re Actually Choosing Between
Chain link isn’t one product. The spec choices below are the ones that change both the price and how long the fence holds up in bay air.
- Galvanized vs. vinyl-coated mesh. Standard galvanized is the cheaper choice at the low end of our range. Vinyl-coated (usually in black or green) costs more up front but adds a layer between the steel and the salt air, which matters on the strait side of town. It also reads less like a chain link fence and more like a dark fence line from a distance.
- Wire gauge and coating weight. Lighter wire is easier to bend by hand and won’t last as long against wind flex. Heavier gauge with a thicker zinc coating costs more and holds up through the wet winters and prevailing onshore wind. Worth it on any run that faces open weather.
- Height. Four-foot is standard residential. Five and six-foot runs cost more in mesh, posts, and footings, and taller runs need heavier posts to stay straight.
- Post wall thickness. Thin-wall posts are cheaper and bend. Schedule 20 or heavier holds a gate true and doesn’t sag over time. Gate posts should always be the heavier option.
- Gates. Walk gates are straightforward. Drive gates need heavier frames, a proper drop rod, and often two posts braced together – a real cost jump, but the only version that lasts.
- Top rail vs. tension wire. Top rail gives a rigid line and better wind resistance. Tension wire is cheaper and common on larger runs; fine for inland lots, less so in a windy spot.
- Privacy slats or windscreen inserts. Optional, priced separately, and a common add-on for yards facing an open street. They also change the wind load on the fence, which affects post sizing.
For a homeowner weighing materials across the whole yard, our Fence Installation service covers the wider material picture, and the Fence Installation in Vallejo page explains how a chain link run fits into a larger perimeter plan.
What Chain Link Fence Costs in Vallejo, CA
Expect $3,500 – $9,000 for a residential chain link fence in Vallejo. A basic 100-foot, four-foot galvanized run with one gate sits near the bottom. A 200-foot, six-foot vinyl-coated run with a drive gate and privacy slats lands near the top.

| Line item | Typical range |
|---|---|
| Galvanized chain link, 4 ft, per linear foot | $22 – $35 |
| Vinyl-coated chain link, per linear foot | $28 – $45 |
| Walk gate (installed) | $350 – $800 |
| Drive gate (installed) | $900 – $2,200 |
| Privacy slats or windscreen | $250 – $1,200 |
| Old fence removal and haul-off | $300 – $900 |
Five things push a job up or down.
- Linear footage and height. The biggest driver by far. Every added foot of run and every added foot of height multiplies mesh, posts, and footing cost.
- Old fence and concrete removal. A yard with a rusted-out fence and rooted footings costs more to clear than a bare lot.
- Ground conditions. Rocky or filled ground means slower digging and sometimes a post driver instead of hand augers.
- Gate count and type. One walk gate is modest. A drive gate with braced posts can add a few thousand.
- Coating and grade. The jump from standard galvanized to heavy vinyl-coated is the single biggest material upgrade on most jobs.
Our written estimate lists every line above with a fixed price, and that price is what you pay – upfront pricing, no surprises. Typically not included unless we quote it separately: property line surveying, tree removal, utility relocation, and any concrete mow strip or curb at the base. Call (833) 700-4611 for an exact quote – estimates are free.
See the difference
Before
After
Before
After
Before
AfterWhat Vallejo Homes Do to a Chain Link Fence
Vallejo sits at the hinge of the Carquinez Strait and San Pablo Bay, and that’s the whole story for steel. Marine fog, salt fog, and wind-driven rain come off the water and hit every exposed surface, so fasteners, hardware, and posts on a strait-facing run corrode years faster than the same fence would in Fairfield or Concord. On the older flats in 94590, we regularly see galvanized posts with rust bleeding at the concrete line after far fewer seasons than an inland fence would show. That’s why we spec heavier zinc coating, vinyl coating, and stainless hardware where it counts.
Housing stock matters too. The 1890s – 1940s Victorians and worker cottages near the waterfront often have old property-line fences tangled with surviving redwood posts and old concrete footings set right where the new line needs to go. Out east in 94591 and 94589, the 1950s – 1970s tracts usually have simpler lots but harder ground. We work across Vallejo, and permitting runs through the city building department – we pull the permits and get the inspections passed on any run that needs them.
One other thing worth flagging: on bay-side jobs, we’ll recommend a heavier post and an extra concrete cure day whenever the run is exposed to prevailing wind. It costs a little more and holds a fence straight for years longer.
Serving Vallejo, CA – Our Local Coverage Area
We serve Vallejo and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions: Chain Link Fence in Vallejo

Most residential chain link fences in Vallejo run $3,500 – $9,000, driven mainly by footage, height, and gate count. A simple four-foot run sits near the low end; a six-foot vinyl-coated run with a drive gate sits near the top. Call (833) 700-4611 for an exact quote – estimates are free.
Most Vallejo jobs finish in one to two working days. Day one covers layout, demo, and setting posts so the concrete can cure overnight; day two covers framework, mesh, and gates. Larger runs, drive gates, or heavy old-fence removal can push a job to three days.
It depends on height and location – many residential runs don’t need a permit, but anything near a corner, over the standard residential height, or in a right-of-way usually does. We check the requirements for your specific address and pull the permit if one is required, then handle the inspection.
Yes. Salt fog and wet winters off the Carquinez Strait accelerate corrosion on any exposed fence hardware, so galvanized posts on the strait side of town show rust sooner than the same fence inland. Vinyl-coated mesh, heavier zinc coating, and stainless hardware are how we buy back the difference – call for a spec recommendation for your lot.
Every chain link fence we install is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in residential construction, and it includes post setting, tension, and gate alignment.
Get a Free Chain Link Fence Estimate in Vallejo
Call (833) 700-4611 and a live person answers, any hour. Tell us the footage, the rough layout, and what’s already there; we’ll set a free on-site estimate and walk the line with you. You’ll get a written, line-item quote with the total in writing, and 0% financing is available for 18 months if you want to spread it out. Homeowners often pair this with Door Installation in Vallejo or ADU Site Prep & Utilities in Vallejo when a bigger project is on the table.
Written by the team at Groundwork Construction Co.












