







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Martinez, CA: What It Costs and How Long It Takes
A chain link fence in Martinez, CA typically runs $3500 – $9000 for a residential lot, and most jobs are finished in two to four working days once materials are on site. The fence goes up along property lines, alley cuts, and driveway edges, and the crew handles demo of the old fence, post-hole digging, concrete setting, and gate hanging. Call (833) 700-4611 for a free on-site estimate before you commit to a layout.

How We Build a Chain Link Fence Here, Stage by Stage

Chain link looks simple until you get into a tight Martinez lot with a shared alley and a fence line running three feet from a neighbor’s garage. That’s where the sequence matters. Here’s the real order of work.
Stage 1: Site walk and layout (day 1, 1 – 2 hours)
We walk the property line with you and mark every post location in paint. On hillside lots the fence line may need to step down the slope in short runs rather than follow a straight string, which changes post spacing and the number of panels. You decide the fence height, the gate positions, and whether the line hugs the property boundary or pulls in a foot to keep clear of a retaining wall.
Stage 2: Demo and clearing (day 1, 2 – 4 hours)
Old fence comes down, posts get pulled or cut at grade, and we haul the debris. If the old posts were set in concrete, they come out with a small auger or by hand. Root balls and buried irrigation lines get flagged and routed around so nothing gets cut that shouldn’t be.
Stage 3: Post holes and concrete (day 1 – 2)
Terminal posts and corner posts go deeper than line posts because they carry the tension of the whole run. We dig, set, and pour concrete, then let it cure. That cure time is the one thing you can’t rush. On a windy Carquinez afternoon we brace posts so fresh concrete doesn’t shift before it takes a set.
Stage 4: Framing and mesh (day 2 – 3)
Top rail, tension wire, and chain link mesh go up once the concrete has cured. Gates get their frames hung and latches aligned. This is the stage homeowners watch because it’s when the fence actually takes shape.
Stage 5: Final walk (day 3 – 4, 30 minutes)
We tension the mesh, check every gate swing and latch, trim the fabric, and walk the line with you. Anything that doesn’t sit right gets fixed before we leave. The whole job is covered by our 730-Day Done Right Promise, and the written quote holds the number you agreed to.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Chain link isn’t a single product. The specs below change the price, the lifespan, and how the fence looks from the street.
- Galvanized vs. vinyl-coated mesh. Galvanized is the budget pick and lasts decades in dry conditions, but Martinez’s wind-driven rain and salt air off the strait push some homeowners toward vinyl-coated. The coating adds roughly 20 – 30% to material cost and holds color longer.
- Framework height and gauge. Standard 4-foot residential is cheapest; 6-foot adds privacy and security. Heavier-gauge wire and Schedule 40 pipe posts cost more but resist bending from a slammed gate or a leaning ladder.
- Post material. Galvanized steel is standard. For hillside runs on a slope, thicker-walled posts and deeper concrete footings hold up better against settling, and Martinez’s reviewers scrutinize grade work, so overbuilding the footing here is money well spent.
- Gates and openers. A walk gate with a self-closing hinge is the entry-level choice; a rolling gate handles a driveway or alley cut. If you want a remote, we spec rolling-code openers so the signal can’t be cloned, which matters on a tight lot where the alley is shared.
- Top rail vs. tension wire. Tension wire is cheaper and holds up on uneven ground; top rail gives a cleaner line and a stiffer fence along the top.
What a Chain Link Fence Costs in Martinez, CA
Plan on $3500 – $9000 for a residential chain link fence in Martinez. The low end is a straight run on flat ground with a single gate. The high end is a long perimeter on a slope with multiple gates and heavier-gauge materials.
What moves the number:
- Linear footage and height. A 100-foot run at 4 feet is a different job than 250 feet at 6 feet.
- Slope and grade. Hillside lots need stepped runs, deeper footings, and sometimes a retaining wall, which pushes cost up 15 – 30%.
- Gate count and type. Each gate adds material and labor; a rolling gate adds more than a walk gate.
- Old fence removal. Hauling debris and pulling concrete-set posts adds labor hours.
- Permit requirements. A fence over a certain height or one tied to hillside grading may need plan review, which adds lead time and a review fee.
Your written estimate lists line items: footage, post count, gate type, concrete, and haul-away. It does not include landscaping repair, sprinkler rerouting, or paint, and we say so upfront so the number you see is the number you pay.

See the difference
Before
After
Before
After
Before
AfterWhat Martinez Homes Do to a Chain Link Fence Job
This is a wind gap town. Martinez sits at the Carquinez Strait where the Delta meets the Bay, and afternoon gusts during construction season are strong enough to blow over a half-framed run or knock over a stack of panels. We schedule framing around the afternoon, brace posts before the concrete sets, and spec wind-rated materials on exposed lines.
The housing stock splits three ways: Victorian-era homes downtown, mid-century ranch tracts on the flats, and custom hillside homes up in Alhambra Valley. On hillside lots the fence line often follows a slope that needs retaining walls and stabilized footings, and both mean more engineering than a flat-lot job. Older downtown properties can have buried infrastructure, roots, or the kind of knob-and-tube-era quirks that show up when you dig post holes. We flag those before the auger goes in.
Permitting runs through Martinez City Hall, which reviews hillside grading and seismic work more closely than surrounding cities do. Budget extra time for plan checks on any fence tied to a slope or retaining structure, and bring your plans in early. This is part of a full Fence Installation in Martinez scope when the job grows beyond chain link, and if you’re adding a structure at the same time, homeowners often pair this with ADU Site Prep & Utilities in Martinez.
We also handle jobs in Martinez and the surrounding towns, and our Fence Installation service covers the wider scope when you’re planning more than one line. Homeowners upgrading a gate opener on a house also often pair this with Door Installation in Martinez.
Serving Martinez, CA – Our Local Coverage Area
We serve Martinez and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Chain Link Fence in Martinez

Most Martinez chain link fences run two to four working days from demo to final walk, with the concrete cure time being the biggest variable. A straight flat run can finish in two; a hillside job with multiple gates and a retaining wall can stretch to five. The date depends on scheduling materials and any plan review at City Hall. Call (833) 700-4611 for an exact timeline.
Residential chain link under the standard height limit usually doesn’t need a permit, but any fence tied to a hillside grading plan or retaining wall likely will. Because Martinez reviews hillside and slope work closely, we check your specific lot before we quote. Call (833) 700-4611 and we’ll tell you what your property needs.
Yes, in most cases chain link goes in around existing plumbing and structures, because post holes are small and shallow compared to a foundation job. The main risk is buried irrigation lines, sprinkler mains, or old utility stubs near the property line, and we flag those before the auger goes in. If a post hits something unexpected, we reroute rather than cut. Call for a site walk.
A residential chain link fence in Martinez runs $3500 – $9000 depending on footage, height, slope, and gate count. Written estimates break the number down line by line so you can see what drives the price. Call (833) 700-4611 for a free estimate.
Every chain link job we install is backed by our 730-Day Done Right Promise, so if a post shifts, a gate sags, or the mesh comes loose, we come back and make it right. The written workmanship guarantee covers the install; manufacturer warranties cover the steel and coating. Ask for the warranty terms in writing on your estimate.
Get a Free On-Site Estimate for Your Chain Link Fence in Martinez
We’ll walk your property, mark the line, and give you a written estimate with line-item pricing for your chain link fence in Martinez. No estimate fee, no pressure, and the number holds once work starts. Call (833) 700-4611 to schedule yours. A live person answers the phone, and we’ll tell you exactly what your lot needs.
Written by the team at Groundwork Construction Co.












