







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow Custom Windows Are Made, and Why It Matters More in Richmond, CA
Custom windows are made by measuring the actual rough opening on site, building frames and sashes to those verified dimensions, and sealing a made-to-order glass unit into that frame before it ships. In Richmond, that process matters more than it does in most Bay Area cities, because the 1920s Craftsman bungalows in the Iron Triangle and South Richmond were not built to today’s standard rough opening sizes. If you’re replacing windows and want the process handled end to end, Groundwork Construction Co. of Richmond coordinates it all at (833) 700-4611.

Richmond’s Housing Stock Doesn’t Match Standard Window Sizes
Richmond’s stock runs from 1910s-1940s shipyard-worker bungalows and Craftsmans in South Richmond and the Iron Triangle to 1950s-60s stucco tract homes in Parkview and Verde. Those older flatlands houses are the ones that send window orders sideways. Openings get modified over the decades – a 1940s shipyard-era conversion, a DIY bump-out, a wall that settled – and suddenly a “standard” 60-inch window leaves a two-inch gap you can’t caulk your way out of.
That’s the practical reason a Richmond homeowner ends up reading about manufacturing at all. Custom sizing isn’t a luxury upgrade here. It’s often the only way to get a clean fit in a wall that was never square to begin with.
What Actually Happens Between Your Order and Your Wall
Custom window manufacturing follows a fixed sequence, and every step depends on the one before it being right.
- Field measurement and verification. Someone measures the rough opening at multiple points – top, middle, bottom, both sides – because old walls are rarely plumb. The manufacturer builds to the smallest dimension. A measurement taken once and written down is a measurement that will bite you.
- Frame cutting from the chosen profile. Extruded vinyl, pultruded fiberglass, or clad-wood profiles get cut on computer-controlled equipment to the exact ordered dimensions. Tolerances are tight, measured in fractions of an inch.
- Glass unit fabrication. The insulated glass unit (IGU) is assembled separately – two panes, a sealed spacer between them, and a gas fill (argon or krypton) for thermal performance. The seal is the part that fails first if it’s done badly, and a failed seal means fog between the panes years down the road.
- Final assembly and QC. Frame, sash, and IGU come together, hardware and grilles go on, and the unit gets checked for square, operation, and seal integrity before it’s crated.
For a Richmond house with fog-belt moisture working on south and west-facing walls, that glass unit quality isn’t abstract. A cheap seal plus our wet winters equals fogging, and fogging means you’re replacing the same window twice. This is the level of detail our technicians watch for, and the reason we push for verified measurements before anything is ordered.

Custom Size vs. Fully Custom: The Cost and Time Difference
Custom size means a manufacturer takes their standard window line and builds it to your non-standard dimensions. Fully custom means non-standard profiles, custom grille patterns, or a hardware configuration outside the standard catalog. The first is routine. The second is a different conversation with the factory.
| What you’re ordering | Typical lead time | Note |
|---|---|---|
| Custom size from a standard line | 4-6 weeks | Most Richmond bungalow replacements fall here |
| Fully custom (profile, grille, hardware) | 6-8 weeks | Design approval happens before the order is cut |
The lead time starts from confirmed measurement, not from the day you signed. Order too early and you’re storing windows in your living room while other work is still open. Order too late and the whole project sits waiting on a truck. That timing is why the pre-job measurement and permit coordination come first – an unpermitted 1940s shipyard-era conversion discovered mid-project can trigger a plan-check scramble that pushes your delivery date back.
For reference, window replacement in Richmond generally runs $4,500-$15,000, and impact-rated units run $8,000-$25,000. Custom sizing sits inside those ranges depending on count and profile. We quote upfront so the number you see is the number you pay.
Andersen vs. Marvin: How the Two Build Differently
The two names Richmond homeowners ask about most build their custom windows in fundamentally different ways, and that difference shows up over years.
Andersen builds several lines around Fibrex, a composite of wood fiber and polymer. It’s dimensionally stable and handles moisture well, which suits a fog-belt climate where wood rot is a real problem on south and west exposures. Marvin uses a wood core wrapped in extruded aluminum cladding – genuine wood inside for the look, aluminum outside doing the weather work. Beautiful in a restored Craftsman, but the wood core means the interior finish still needs attention over time.
Neither is wrong for Richmond. The question is which one fits the house and how you plan to live with it. Working with a curated set of manufacturers like Andersen and Marvin means we’re matching a profile to your walls, not selling whatever happens to be in stock.
What to Look for When You’re Comparing Bids
Window bids vary wildly in what they actually include, and the manufacturing details are where the gap hides. Look for:
- A field measurement taken on site, not off a plan or a previous receipt.
- A written glass unit spec – spacer type, gas fill, and U-factor – not just “energy efficient.”
- A stated lead time measured from confirmed measurement.
- Clear language on who handles permits if an unpermitted addition surfaces during the job.
That last point is a Richmond-specific one. The “garage” or “bonus room” on a 1940s South Richmond bungalow is frequently an unpermitted shipyard-era conversion, and discovering that mid-project changes the timeline. Knowing it in advance is how you avoid a stalled job waiting on a factory. Every project we finish is backed by the 730-Day Done Right Promise – if it’s not done right, we make it right. Calls are answered by a live person, 24/7, and technicians are background-checked and arrive in uniform. You can see our full Windows & Doors work and how we handle the whole job from measurement to install.
FAQs
Custom windows from premium manufacturers take 4-8 weeks from confirmed measurement to delivery. Custom sizing from a standard line usually lands in 4-6 weeks, while fully custom profiles, grilles, or hardware run toward 6-8. The clock starts once measurements are verified, not when you sign – so getting a field measurement done early is what keeps a Richmond project on schedule. Call (833) 700-4611 for an exact quote – estimates are free.
Yes. That’s the routine outcome in South Richmond and the Iron Triangle, where 1910s-1940s openings rarely match modern standard sizes. The frame is built to the smallest measurement taken across the opening, which is why field verification happens at multiple points rather than once. A window built to a single measurement on a sagging wall is how you end up with a permanent draft. Call us and we’ll measure before anything gets ordered.
No. Custom sizing from a standard manufacturer’s line sits within normal replacement ranges and often costs less than the damage from forcing a standard unit into an oversized opening. For Richmond window replacement, most projects fall between $4,500 and $15,000 depending on count and profile. Fully custom work costs more in both dollars and lead time. Call (833) 700-4611 for a free estimate and an upfront number.
Yes, it can. If an older flatlands house has an unpermitted shipyard-era conversion where the window goes, a permit review may be required before install, and that pushes the timeline. Finding out before the order is placed is far cheaper than finding out after the windows arrive. We coordinate the permit timeline with the delivery date so nothing sits in a crate waiting.
Get Your Richmond Windows Measured Right the First Time
If you’d rather have it looked at, Groundwork Construction Co. of Richmond offers a no-pressure assessment in Richmond – call (833) 700-4611. We measure, verify, and coordinate the factory order and permits so your custom windows arrive when the job needs them. See our Richmond service area for how we work in your neighborhood.
Written by the team at Groundwork Construction Co. of Richmond, serving Richmond, CA.


