







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Richmond Homeowners Choose PGT Construction
We provide independent PGT construction service in Richmond, CA: window and door repair, glass replacement, frame correction, and full replacement with modern PGT series. What makes our PGT work different is that it’s built around Richmond’s actual conditions – bay fog, salt air, and a housing stock where a 1920s bungalow and a 1990s stucco tract home often need opposite approaches to the same PGT problem.

We are an independent PGT service provider. Groundwork Construction Co. of Richmond is not affiliated with, sponsored by, or authorized by PGT, and we don’t imply otherwise. We’re a full-scope construction firm that installs and repairs these products because Richmond homeowners ask for them by name. Our technicians have up to 12 years of experience, every project is covered by our 730-Day Done Right Promise, and calls are answered by a live person 24/7 at (833) 700-4611.
Why Trust Groundwork Construction Co. of Richmond for Your PGT Construction?

PGT products are engineered well, but they’re installed and serviced by people – and that’s where most Richmond PGT problems start. Our technicians know PGT’s product generations from the older Sentinel by PGT units still working in Richmond Heights ranches to current WinGuard Vinyl and Aluminum series, and they know how each generation fails differently.
We source OEM-compatible parts wherever they exist, so a replacement sash, roller, or glazing unit fits the frame you already have. On discontinued lines, we use aftermarket components that meet or exceed the original spec, and we say plainly when we’re making that substitution. No guessing, no “close enough.”
Everything we do is warranty-safe. We don’t drill, shim, or seal in ways that give a manufacturer a reason to deny a claim, and we document the work so you have a record if one is ever needed. Our process follows manufacturer installation guidance on flashing, shimming, and anchoring – the parts of a window job nobody sees once the trim goes back on.
Richmond’s fog-belt climate is unforgiving to poorly sealed units. Fog rolls in off the bay and sits against south- and west-facing glass for hours, which finds every gap a sloppy install left behind. We treat sealing as the job, not the finishing touch. And with our 730-Day Done Right Promise, if something we touched isn’t right, we come back and make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common PGT Construction Problems We Fix in Richmond
PGT failures aren’t random. They follow patterns tied to product family and local exposure, and knowing those patterns is how we diagnose quickly and honestly.
- WinGuard Vinyl frames warping or cracking. Prolonged sun exposure on west-facing vinyl frames causes the material to distort, which pulls the sash out of square and breaks the seal. Once the frame warps, water intrusion follows. In Richmond, we see this most on inland-facing elevations where afternoon sun hits hard and there’s no shade buffer.
- Aluminum frame pitting and corrosion. PGT Aluminum series hold up well generally, but coastal exposure near the bay accelerates oxidation. White spots and pitting compromise the finish first, then the structural integrity around fasteners and corners. Homes closer to the water see it sooner, and it’s more than cosmetic once it reaches the sill.
- Dual-pane glass seal failure. Fogging or condensation trapped between panes means the sealed unit’s desiccant has given out. It kills energy efficiency and clarity, and it’s the single most common PGT complaint we get in Richmond. The frame is usually fine; the glass unit is the problem.
- Worn hardware on sliding doors and casement windows. Rollers, locks, and hinges wear out with use, and a sticky slider or a casement that won’t latch is a security issue, not just an annoyance. Original hardware on older PGT units is often the culprit, and replacing it restores smooth operation without touching the frame.
- Weatherstripping compression on WinGuard units. Over time, weatherstripping flattens and stops sealing. Homeowners notice drafts and higher bills before they notice the strip itself. Replacing it is cheap and fast, and it’s the first thing we check when someone reports a PGT window that won’t close tight.
A typical scenario plays out this way: a homeowner notices several WinGuard windows no longer close tightly, with visible fogging between panes. Inspection usually finds failed seals and worn weatherstripping, compounded by frame distortion from heat. A qualified local pro typically replaces the affected glass units or entire sashes, re-squares the frames, and installs new weatherstripping to restore a proper seal and smooth operation. That’s the pattern, not a one-off.
Richmond’s housing stock adds a wrinkle most window contractors don’t anticipate. South Richmond and Iron Triangle bungalows from the 1910s through the 1940s often had their openings modified over the decades, sometimes without permits. When we measure for a PGT replacement in those homes, we check rough openings against the actual frame, because a “standard” size can be anything but.
PGT Parts & Our Repair-vs-Replace Approach

We source OEM parts for PGT windows and doors whenever they’re available, because fit and finish depend on it. For older or discontinued lines, we use quality aftermarket components that meet or exceed original specifications – and we tell you when that’s what we’re doing and why.
We don’t stock PGT parts locally. Each part is sourced for each job based on the exact model and generation, which takes a little longer but gets you a component that actually fits. That’s the right trade for a window you plan to keep.
Our repair-vs-replace call is honest, not sales-driven. Fogged glass on an otherwise sound frame is a repair. A warped vinyl frame with pitting at the corners, on the other hand, is usually replacement territory, because repairing it just postpones the same failure. If repair won’t be cost-effective or compromises safety, we say so and recommend a modern PGT or equivalent product, with pricing in writing before anything starts.
Want a straight answer on your specific PGT units? Call (833) 700-4611 and we’ll schedule a free estimate.
Our PGT Service Process – Step by Step
- 1
Diagnosis. We inspect the unit in place – checking frame square, seal integrity, glass, hardware, and flashing – and identify the exact PGT series and generation so parts are right the first time. You get a written assessment of what’s wrong and what it takes to fix it.
- 2
Repair or install. For repairs, we replace the failed component (glass unit, sash, hardware, weatherstripping) and re-square the frame. For installs, we follow manufacturer flashing and shimming guidance, which matters most in Richmond’s fog belt where water sits against the wall.
- 3
Test. We operate every unit, check the latch and lock, confirm drainage weeps are clear, and verify the seal with a water test where it’s warranted. You see it working before we leave.
- 4
Warranty and documentation. Every job is backed by our 730-Day Done Right Promise. If something we touched isn’t right, we come back and make it right – no fine print, no runaround.
See the difference
Before
After
Before
After
Before
AfterPGT Products We Service & Install in Richmond

We service and install across PGT’s product families, including WinGuard Aluminum Series, WinGuard Vinyl Series, Sentinel by PGT, and PremierVue Series. That covers impact-rated windows and doors, standard replacement windows, sliding glass doors, and the casement and awning units common in Richmond homes.
Our sub-services around these products are Window Replacement, Impact Window Installation, and roof repair where window or door leaks have damaged surrounding structure. Richmond’s winter rains expose drainage and flashing problems fast, so we check the wall assembly around any window we replace, not just the window itself. If a leak has gotten into the framing, roof repair often comes up alongside the window work. Calls are answered by a live person 24/7.
We Also Service These Brands
We’re multi-brand, not single-brand dependent. Alongside PGT, we service and install KraftMaid cabinetry, Kohler fixtures, GAF roofing, and Master Halco fencing – so a Richmond whole-home project can run through one contractor instead of five. From foundation to finish line, built to last and backed in writing.
FAQs – PGT Construction Service in Richmond
It depends on where the crack is and whether the frame has lost its shape. A hairline crack at a corner can sometimes be repaired, but a cracked frame that’s also warped or out of square usually means replacement, because a patch won’t restore the seal. We’ll tell you which one you’re looking at after inspection. Call (833) 700-4611 for a free estimate.
Surface oxidation can often be cleaned and refinished, but pitting that’s reached the metal and compromised the finish or fasteners usually means the affected sections need replacement. In Richmond, homes closer to the bay see this sooner due to salt air. We’ll assess the extent and give you a clear repair-or-replace recommendation. Call (833) 700-4611 to schedule.
Yes, we install PGT impact windows in Richmond. Window replacement generally requires a building permit through the City of Richmond, and impact-rated units may also need documentation confirming they meet the applicable wind and impact requirements. We handle the permit process as part of the job. Call (833) 700-4611 to talk through your project.
Most fogged glass unit replacements are done in a single visit once the correct unit is sourced. The timeline depends on the PGT model and whether the unit is a current series or a discontinued line, since parts are sourced per job rather than stocked. Call (833) 700-4611 for a timing estimate on your specific windows.
Budget from $8,000 to $25,000 for impact window and door installation depending on size, series, and opening condition. Smaller sliding doors land at the low end; oversized units with structural work run higher. Call (833) 700-4611 for an exact quote – estimates are free.
Service performed to manufacturer specification doesn’t void your warranty, and we work to that standard on every job. What can void a warranty is improper installation, unauthorized modification, or sealing done in a way the manufacturer doesn’t approve. We document our work so you have a record. Call (833) 700-4611 with questions about your specific warranty.
Here’s what these jobs typically run in Richmond’s market:
| Service | Typical Richmond Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Roof Repair | $400 – $1,800 |
Full PGT unit replacement in Richmond’s older flatlands frequently triggers retroactive permit work on unpermitted shipyard-era conversions, so factor that in if your home predates 1950. Call (833) 700-4611 for an exact quote with upfront pricing – the number you see is the number you pay, and it’s free.
Book Your PGT Service in Richmond, CA
Whether it’s fogged WinGuard glass, pitted aluminum frames, or a full impact window upgrade, we’ll diagnose it honestly and quote it in writing. Call Groundwork Construction Co. of Richmond at (833) 700-4611 for your free estimate. Live person, 24/7 – and every job backed by our 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co.












