







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterADU Design & Permitting in Richmond, CA
ADU design and permitting in Richmond, CA is where most accessory dwelling unit projects quietly stall. Before a single shovel turns dirt, your unit has to be designed to fit the lot, drawn to California code, and cleared through Richmond’s planning and building review – then built. Groundwork Construction Co. of Richmond handles that whole front end, from first sketch to stamped permit, so the project you picture actually has a legal path forward.
We do this well because we build what we draw. Our technicians have up to 12 years of experience, and every plan we submit is one we can confidently construct later under our 730-Day Done Right Promise – if it isn’t done right, we make it right. That single-contractor continuity is the point: the people who design your ADU are the same people who later bring it out of the ground. From foundation to finish line, one team stays accountable.
Richmond makes this interesting. Lots here are tight and varied – a flat North & East corner lot is a different puzzle than a sloped hillside property near Point Richmond or a narrow parcel by the bay. Add Richmond’s periodic revisions to its ADU ordinance and a state law landscape that has shifted several times since 2020, and a homeowner doing this alone can burn months on a submittal that gets kicked back. That’s the gap we close. If you’re starting to think about an ADU, call (833) 700-4611 – a live person answers 24/7, no voicemail black hole – and we’ll walk your specific lot through the possibilities. For the full picture of how this fits into a larger addition project, see our Home Additions & ADU in Richmond page.
Key Takeaways
- ADU design and permitting in Richmond typically runs $6,000 – $18,000 for design and plan prep, plus $4,000 – $10,000 in city review and permit fees, though exact numbers depend on unit size, site conditions, and whether the site needs grading, retaining walls, or utility upgrades.
- We handle zoning checks, design, engineering coordination, and the actual Richmond submittal – not just the drawing.
- Detached units, attached units, garage conversions, and JADUs all follow different plan and fee paths; we scope the right one before you spend money.
- Live person, 24/7, whenever you call. Upfront pricing, no surprises, on the plan work before we begin.

When You Need ADU Design & Permitting
Most Richmond homeowners don’t start with “I need design and permitting.” They start with a hunch – an empty garage, a big backyard, a parent who’s getting older – and only later learn that the paperwork is the slow part. These are the situations where bringing us in early saves real time and money:
- You want to convert a garage or basement into living space. A lot in the Richmond Annex or along the older streets off San Pablo Avenue often has a detached garage that’s a natural JADU or ADU candidate – but conversions trigger egress, insulation, and foundation requirements that have to be drawn and permitted correctly, not hand-waved.
- You’re adding a detached unit for family or rental income. Whether it’s for aging parents, a returning adult child, or a rental that helps carry the mortgage, a detached ADU needs a full design set – site plan, floor plan, elevations, structural – plus a Richmond zoning clearance that confirms you’re inside the lot coverage and setback rules.
- You’ve been told your lot is “problematic.” Sloped parcels near the hills, tight side yards, or lots with existing non-conforming structures are where design and permitting expertise earns its keep. A designer who knows Richmond’s plan reviewers and how they read a submittal catches these issues on paper instead of in the field.
- A previous contractor left you with a half-finished plan or a denied submittal. We regularly take over stalled designs, correct what triggered the correction notices, and resubmit. You don’t have to restart from zero.
- You’re building an addition and want to add an ADU in the same scope. If the ADU is riding along with a larger home addition, coordinating the design and permits together usually costs less and builds cleaner than running two separate projects. That’s why the early design conversation matters.
- You’re weighing a prefab or kit unit and need local permitting. Even a manufactured unit has to clear Richmond’s site, utility, and foundation review. We design and permit the site work that makes a kit unit legal and buildable here.
If any of those sound familiar, the smartest first step is a free design consult, not a deposit. Call (833) 700-4611 and we’ll tell you honestly which path your property is on.
Our ADU Design & Permitting Process
We run this front end in a fixed order so nothing gets drawn before we know it can be permitted. Here’s how it moves:
- Lot and zoning feasibility. We pull your parcel’s zoning, setbacks, lot coverage, height limits, and any overlays, then check them against Richmond’s current ADU rules and the state ADU statutes that override local rules in some cases. This is where we confirm what you can actually build – a detached unit, an attached unit, a garage conversion, or a JADU – before design starts. If the lot is tricky, you learn it now, not after paying for drawings.
- Design and site plan. We draw the unit to fit your real lot: floor plan, elevations, site plan showing drainage and access, and structural design coordinated with an engineer where the unit or site demands it. We design to your use – a long-term family unit and a rental unit get different layouts and different privacy and access planning.
- Engineering and title-24 coordination. Structural calcs, energy compliance, and any soils or grading input get bundled into a single, complete submittal. Missing one of these is the single most common reason a Richmond submittal gets sent back; we build the package so it doesn’t.
- Richmond submittal and plan review. We file with the city, track the review, and respond to correction notices on your behalf. When a reviewer asks for a change, we make it and resubmit – you’re not the one chasing the counter.
- Permit issuance and handoff to construction. Once the permit is issued, the same team that designed the unit can carry it into construction, so the drawings and the build stay in sync. No hand-off to a stranger who reads your plans cold.
Throughout, you get status updates and one point of contact. And because our calls are answered by a live person 24/7, a question about your submittal doesn’t wait until Monday. Every stage sits inside the same home improvement relationship, backed by our 730-Day Done Right Promise and upfront pricing before work begins.

ADU Design & Permitting Pricing in Richmond
Honest answer up front: ADU design and permitting in Richmond generally breaks into two buckets – what you pay for design and plan preparation, and what you pay the city in review and permit fees. Neither is a flat number, because a 500-square-foot garage conversion and an 800-square-foot detached two-story unit are not the same job. Here’s the structure we see in this market, with the caveat that your lot and unit size move these ranges.
| Line item | Typical Richmond range |
|---|---|
| Feasibility and zoning check | Often included with a design agreement; standalone consult $0 with our free estimate |
| Design and plan set (floor plan, elevations, site plan) | $4,000 – $10,000, depending on unit size and complexity |
| Structural engineering coordination | $1,500 – $4,000 |
| Energy (Title 24) compliance | $800 – $2,000 |
| Richmond plan review and permit fees | $4,000 – $10,000, scaled to valuation and unit type |
| Total design and permitting (front end) | Roughly $10,000 – $26,000 all-in for a typical unit |
What moves the number up or down: a garage conversion or a simple attached unit sits toward the low end; a detached unit on a sloped hillside lot near Point Richmond, a parcel that needs a retaining wall or grading plan, or a property with utility upgrades pulls toward the high end. Site conditions – drainage, access, existing structures that don’t conform – are usually the swing factor, not the living space itself. We tell you which side of the range you’re on before you commit.
That’s the “no-hassle upfront pricing” we mean: the number you see is the number you pay for the scope we’ve defined. And this front-end spend is part of a larger project, so our $1,000 off projects over $10,000 and 0% financing for 18 months can apply to the total build – design and permitting included – which makes the whole thing easier to carry than paying each phase as it comes.
Every project starts with a free project estimate and design consult. Call (833) 700-4611 and we’ll put real ranges on paper for your specific lot.
FAQs – ADU Design & Permitting
How much does ADU design and permitting cost in Richmond?
ADU design and permitting in Richmond typically runs about $10,000 – $26,000 all-in for a standard unit – roughly $6,000 – $16,000 for design, engineering, and energy compliance, plus $4,000 – $10,000 in city review and permit fees. A garage conversion or simple attached unit lands near the low end; a detached unit on a tricky or sloped lot lands near the high end because of site work and engineering. Call (833) 700-4611 for an exact quote on your property – the estimate is free.
How long does it take to get an ADU permit in Richmond?
Most Richmond ADU permit timelines run several months from completed design to issued permit, and the design phase itself takes several weeks before that clock even starts. The variable is plan review: a clean, complete submittal moves faster than one that gets correction notices and resubmits. We build completeness into the package precisely to avoid the resubmit loop. Because response time drives the schedule, call us early – a live person answers 24/7 at (833) 700-4611.
Do I need a separate permit for a garage conversion ADU in Richmond?
Yes. A garage-to-ADU conversion still needs a building permit and a full plan set, even though the structure already stands – because the unit has to meet current egress, insulation, energy, and foundation requirements that a bare garage doesn’t. The conversion path is often simpler and cheaper than new construction, but it’s not paperwork-free. We scope the exact conversion requirements for your garage before you commit a dollar; call (833) 700-4611 for a free read on your property.
Can you take over an ADU design or permit that was already started or denied?
Yes, and we do it often. If a prior designer left you with incomplete drawings or Richmond issued correction notices you don’t understand, we review what exists, fix what’s triggering the denials, and resubmit on your behalf. You usually don’t have to start over. The fastest way to know is to send us what you’ve got and let us look – call (833) 700-4611, and the consult costs nothing.
Why Homeowners Hand Us the Whole Front End
The value of this service isn’t a pretty drawing – it’s a permitted, buildable plan that matches how the unit will actually be constructed. Because we build, we design for construction realities Richmond reviewers and inspectors care about: correct setbacks, drainage that works, structural that holds, energy compliance that passes. The material and product choices that eventually go into the unit – from ES Windows and Therma-Tru doors to the fixtures and finishes – get considered at design time so the finished unit is one you’re proud of, not a plan that gets value-engineered into a compromise. Built to last, backed in writing.
If design and permitting are one piece of a larger addition, launching them together with the parent scope usually saves money and scheduling friction. Our Home Additions & ADU team coordinates the whole thing, and the same 730-Day Done Right Promise and background-checked, uniformed technicians apply whether the job is a design package or a finished structure. When you’re ready to move from “someday” to a stamped plan, one call starts it: (833) 700-4611, answered by a live person around the clock. Free estimates and a design consult are always available, and your 730-Day peace of mind – if it isn’t done right, we make it right – begins the day we start.
Written by the team at Groundwork Construction Co. of Richmond, serving Richmond.


