







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Richmond Homeowners Choose Belgard Construction
Groundwork Construction Co. of Richmond provides independent Belgard construction service in Richmond, CA – installation and repair of Belgard paver driveways, paver patios, and Weston Stone walls, built for this city’s expansive clay soils and shoreline moisture. What sets our Belgard work apart is base preparation: we excavate and compact to the soil layer we actually find on your lot, not to a generic spec sheet, because a Belgard surface is only as good as what’s under it. We are an independent contractor, not affiliated with or authorized by Belgard. Call (833) 700-4611 to schedule a free estimate.

Why Trust Groundwork Construction Co. of Richmond for Your Belgard Construction?

Our technicians have up to 12 years of experience with Belgard hardscape systems, and that experience shows up in the details that get missed. We know the dimensional tolerances of Urbana and Catalina Grana pavers, which matters when matching a repair into an existing field so the color and joints line up instead of reading as a patch. We specify OEM Belgard units and compatible polymeric sands for every visible face, because aftermarket lookalikes drift on color and thickness and the mismatch shows within one season.
Warranty-safe work is the other half of it. We photograph base prep, drainage aggregate, and edge restraint before anything gets covered, so there’s a record if a manufacturer question ever comes up. Every Belgard project we complete is backed by our 730-Day Done Right Promise – if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in residential construction, and it sits alongside the manufacturer’s own coverage rather than replacing it. Calls are answered by a live person 24/7, so a question about a paver edge or a washing-out joint doesn’t wait until Monday.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Belgard Construction Problems We Fix in Richmond
These are the Belgard failures we see most often in Richmond, and why they happen:
- Efflorescence on Urbana and Catalina Grana pavers. That chalky white bloom is mineral salt drawn to the surface, and in Richmond it usually traces to polymeric sand applied over a damp surface or a base that doesn’t drain. The fog-belt moisture here keeps pavers wet longer than most of the East Bay, so the window for a clean sand application is narrower than a generic install guide assumes.
- Joint sand washout and edge migration on slopes. Where a Belgard field meets a slope and the edge restraint wasn’t pinned into compacted base, winter rain scours the joints and pavers creep outward one season at a time. Richmond’s flatland lots drain slowly, so water sits against that edge longer and the movement shows up faster.
- Settlement and lippage over expansive clay. Richmond’s clays swell and shrink with the wet-dry cycle, and a base excavated to a shallow depth will heave. You get pavers that rock underfoot and lips that catch a shoe or a mower wheel. This is a base problem, not a paver problem, and no amount of re-sanding fixes it.
- Weston Stone wall face spalling and unit displacement. Wall block fails when hydrostatic pressure builds behind it because there’s no drainage aggregate and no weep points. In older Richmond flatlands, where a wall often sits against fill soil that holds water, this pressure builds quietly until a face pops or a course shifts.
- Polymeric haze and crusted joints. When polymeric sand is over-watered during installation, it cures into a crust on the paver face instead of locking in the joint. On textured Belgard surfaces, that haze bites into the profile and won’t sweep away.
Belgard Parts & Our Repair-vs-Replace Approach

OEM Belgard units and compatible polymeric sands are what we specify for visible field and wall faces, because color match and dimensional tolerance are the whole game on a repair. Base aggregates and edge restraints we source for performance, not brand – crushed base that compacts and holds under Richmond clay, and restraint that pins deep and stays. We don’t claim local stock of Belgard material; each job is sourced against the actual model and color on your property, which is why we confirm the line before quoting.
Repair is the right call when settlement or joint loss is localized and the base under the rest of the field is sound. Full replacement is the honest recommendation when base failure runs under most of the field or units are spalling past cosmetic repair. We’ll show you which one you’re looking at before you commit to either. Call (833) 700-4611 for a free estimate and a straight answer.
Our Belgard Service Process – Step by Step
- 1
Diagnosis. We identify the exact Belgard line – Urbana, Catalina Grana, Mega Arbel, Weston Stone – and trace the symptom to its source. White bloom, rocking pavers, and washed joints each point somewhere different, and the base is where most of it starts.
- 2
Repair or install. We excavate to the depth the soil requires, compact in lifts, set drainage aggregate and weep points behind any wall, and pin edge restraint into compacted base. Belgard units and polymeric sand go down dry and clean, with the sand worked into joints before any water touches the surface.
- 3
Verify. We check joint fill, edge stability, and drainage flow, and we photograph the base and finishes before close-out so there’s a documented record.
- 4
Warranty. Your work is covered by the 730-Day Done Right Promise, and we walk you through what the manufacturer’s coverage does and doesn’t include so nothing is buried in fine print.
See the difference
Before
After
Before
After
Before
AfterBelgard Products We Service & Install in Richmond
We work across the Belgard paver and wall lines most common on Richmond properties: Urbana pavers, Catalina Grana pavers, Mega Arbel interlocking pavers, and Weston Stone wall block. That covers paver driveway installation, paver patio installation, and driveway replacement, along with wall repair and edge-restraint work on existing installations. If your property has a Belgard line we haven’t listed, tell us the model or send a photo and we’ll confirm coverage before quoting.
We Also Service These Brands
Belgard is one trade in a bigger picture. Groundwork Construction Co. of Richmond also works with KraftMaid cabinetry, Kohler fixtures, GAF roofing, and PGT windows, so a Belgard driveway project that turns into a broader exterior or interior scope stays under one contractor. From foundation to finish line, you deal with one team and one warranty.

FAQs – Belgard Construction Service in Richmond

No. We are an independent Belgard service provider and are not affiliated with or authorized by Belgard. We install and repair Belgard products using OEM units and compatible materials, and we’re upfront about that distinction. Call (833) 700-4611 to schedule a free estimate.
Yes, for visible field and wall faces we specify genuine Belgard units and compatible polymeric sands so color and dimensional tolerances match your existing installation. Base aggregates and edge restraints are sourced for performance rather than brand, since that’s where structural integrity actually comes from. Call (833) 700-4611 with your model line for a free estimate.
Most localized Belgard repairs – resetting settled units, re-sanding joints, re-pinning edge restraint – finish in a single visit, while a full paver driveway or patio installation runs several days depending on square footage, base depth, and drainage work. We give you a realistic schedule in the written estimate, not a guess on the phone. Call (833) 700-4611 to book yours.
We cover Urbana pavers, Catalina Grana pavers, Mega Arbel interlocking pavers, and Weston Stone wall block, along with the driveway, patio, and wall work those lines support. If your property has a different Belgard series, send the model name or a photo and we’ll confirm. Call (833) 700-4611 for a free estimate.
Properly installed OEM Belgard material with correct base preparation and drainage doesn’t void your manufacturer coverage – and it’s poor installation, not qualified service, that usually creates warranty problems. We photograph base prep and finished work so there’s a documented record, and our own 730-Day Done Right Promise backs the labor. Call (833) 700-4611 to talk through your situation.
Belgard paver work in Richmond runs from about $3,500 for a smaller patio up to $18,000 for a full paver driveway, depending on square footage, base depth, and drainage. Here’s the line-item breakdown:
| Service | Typical Richmond Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
On Richmond’s expansive clays, base depth and drainage drive the number more than paver choice does, so a quote that doesn’t account for what’s under your lot is a quote that will change. We price upfront – the number you see is the number you pay. Call (833) 700-4611 for an exact quote; estimates are free.
Book Your Belgard Service in Richmond, CA
Whether it’s a Belgard paver driveway, a patio that’s lipping at the edges, or a Weston Stone wall losing a course, Groundwork Construction Co. of Richmond can diagnose it and quote it in writing. Call (833) 700-4611 for a free estimate. Live person, 24/7. Upfront pricing, no surprises, and the 730-Day Done Right Promise on every job.
Written by the team at Groundwork Construction Co. of Richmond.












