







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Windows & Doors in Richmond: What to Know First
PGT windows and doors in Richmond are serviced independently by our team, and most repairs and replacements are scoped at a free estimate and scheduled within one to two weeks, with single-visit repairs where the parts are on hand. Expect window replacement to run $4,500 – $15,000 for a typical Richmond home, and impact-rated installation to run $8,000 – $25,000. We quote upfront with no surprises, so the number you see is the number you pay.

This page is for Richmond homeowners who already own a PGT product – a sliding glass door, a vinyl single-hung, an impact unit from a previous owner’s upgrade – and need it fixed, replaced, or brought up to code. As an independent PGT service provider, we’re not affiliated with or authorized by the manufacturer; we just know the product. Call (833) 700-4611 and a live person answers, day or night.
How PGT Products Fail – and How We Fix Them
PGT builds a strong product, but every window and door in Richmond’s marine climate faces sand, salt air, and a lot of wind-driven rain off the bay. Here are the patterns we see most, and what we do about each.
- Roller failure on PGT sliding glass doors. The tandem rollers under a PGT Vinyl Sliding Glass Door wear flat and start to bind after years of grit tracking into the lower track – a common reality in Point Richmond and the flats near the shoreline, where windblown sand gets everywhere. We replace the roller assemblies with OEM-spec parts and clean or re-machine the track so the panel glides on the first push again.
- Failed sealed glass units (fogging between panes). When a PGT insulated glass unit loses its desiccant seal, you get fog or a hazy film you can’t clean off – it’s condensation trapped inside the IGU, not on the surface. We measure and order a matching replacement unit, swap the glass, and re-seal, keeping your existing frame and sash rather than selling you a whole new window.
- Weatherstripping and sweep wear on PGT doors. PGT hinged and sliding doors use foam and fin-seal weatherstripping that compresses flat and lets water and air in at the threshold. In Richmond’s rainy season that shows up as a damp sill or a draft at the bottom corner. We install new OEM-style sweeps and seals so the door closes tight and drains the way it was designed to.
- Water intrusion at impact window perimeters. Impact-rated PGT units are heavy, and if the original install skipped proper flashing or backer rod, water finds the rough opening during a storm. We pull the trim, inspect for rot, re-flash and re-seal the perimeter correctly – the part of the job most quick-fix crews skip.
- Hardware and lock misalignment. On PGT vinyl windows, the sash can rack out of square over time, and locks and latches stop lining up. We re-square the sash, adjust the frame, and replace worn lock hardware with parts that match the series, so the window locks and seals again.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our PGT Windows & Doors Process
- 1
Diagnose in person. A background-checked, uniformed technician inspects the unit, identifies the PGT series, and figures out whether the problem is glass, hardware, weatherstripping, or the install itself – not just the symptom.
- 2
Decide OEM versus quality aftermarket parts. Where a PGT factory part is the right call for fit and warranty, we order it. Where a quality aftermarket equivalent does the same job for less, we tell you and let you choose. We never substitute silently.
- 3
Quote it upfront. You get a written line-item price before we touch anything. No change orders mid-job, no surprise line items after the fact.
- 4
Do the repair or install. Most repairs finish in a single visit. Full window or door replacements are scheduled and completed with the doors and windows installed, flashed, and sealed to manufacturer specs.
- 5
Test everything. Every unit gets opened, closed, locked, and checked for proper drainage and seal before we call it done.
- 6
Back it in writing. The work is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right.
What PGT Windows & Doors Costs in Richmond

Here’s what PGT window and door work runs in the Richmond market. These are real ranges, not teaser numbers, and they reflect what the job actually takes.
| Project | Typical Richmond Range |
|---|---|
| Window replacement (whole-home, standard) | $4,500 – $15,000 |
| Impact window installation | $8,000 – $25,000 |
| Single sealed-glass (IGU) replacement | Quoted per unit |
| Sliding / patio door replacement | Priced per opening at estimate |
| Hardware, roller, and weatherstripping repair | Priced per unit at estimate |
What moves the number: the number of openings, whether you choose impact-rated glass, frame material, and whether the rough opening needs re-flashing or rot repair. A single failed IGU costs far less than a full replacement, which is why we diagnose before we quote. Every price starts with a free estimate and design consult. Call (833) 700-4611 for your exact number.
See the difference
Before
After
Before
After
Before
AfterWhy Richmond Homeowners Call Groundwork Construction Co. of Richmond for PGT Work
We’ve been in business since 2014 and built our reputation on doing the job right and standing behind it. Our technicians have up to 12 years of experience, and they know PGT products specifically – which series fail how, and which repairs hold. Every job is backed by our 730-Day Done Right Promise, one of the longest workmanship guarantees in the residential construction space, and every call is answered by a live person 24/7, so you’re never stuck in a voicemail black hole.
We bring the same standard to the rest of the home: select KraftMaid, Kohler, GAF, and Master Halco products when a related project calls for them. Upfront pricing, no surprises, and $1,000 off projects over $10,000 with 0% financing for 18 months available. From foundation to finish line, built to last and backed in writing.
FAQs

Does repairing my PGT windows in Richmond void the PGT warranty? Not when the work is done to manufacturer specs and doesn’t modify the structure of the unit. We use OEM or OEM-spec parts, avoid cutting into the frame, and keep your PGT warranty intact. Call (833) 700-4611 to schedule an assessment.
Can you get PGT replacement parts in Richmond, or do I need a new window? We can source most PGT parts – rollers, sweeps, weatherstripping, locks, and replacement glass units – without replacing the whole window. A failed sealed unit or worn roller almost never means a full replacement. Call us for a free estimate.
Should I repair or replace my PGT windows? Repair when the issue is a single failed IGU, worn hardware, or weatherstripping. Replace when multiple units have failed seals, the frames are damaged, or you want to upgrade to impact-rated glass. We’ll tell you honestly which one makes sense. Call (833) 700-4611 for a no-pressure recommendation.
How long does PGT window and door work take in Richmond? Most repairs are done in a single visit. Full window or door replacements are typically scheduled within one to two weeks and completed once the correct units arrive. We’ll give you a clear timeline at the estimate, with no vague windows of time.
Do you install impact-rated PGT windows in Richmond? Yes. Impact window installation in Richmond runs $8,000 – $25,000 depending on the number of openings and glass options, and every install is flashed and sealed correctly and backed by our 730-Day Done Right Promise. Call (833) 700-4611 for a free estimate and design consult.
Written by the team at Groundwork Construction Co. of Richmond, serving Richmond and nearby areas.
Get Your PGT Windows & Doors Priced Right
Whether you’ve got a foggy sliding door, a sticky sash, or a whole-home window replacement on the table, we’ll give you a straight answer and an upfront number. Call Groundwork Construction Co. of Richmond at (833) 700-4611 for your free estimate and design consult. A live person answers 24/7, and with $1,000 off projects over $10,000 and 0% financing for 18 months, the path to better windows in Richmond is simpler than you’d think. If it’s not done right, we make it right – for 730 days.












