







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Richmond, CA: What the Job Costs and What It Takes
Cabinets & countertops in Richmond, CA typically run $14,000 – $45,000 depending on layout size, material grade, and whether we’re moving plumbing or electrical. Most projects take three to five weeks from demolition to final caulk, with countertop fabrication eating the longest single stretch. Call (833) 700-4611 for a free on-site estimate – we’ll measure, talk materials, and put a written number in front of you. Richmond’s older housing stock adds its own variables, and we’ll flag those before you commit to anything.

How the cabinets and countertop process actually runs, stage by stage

This isn’t a one-visit job, and any contractor who tells you otherwise is skipping steps. Here’s what the work really looks like from our side of the tape line.
Stage 1: Measure and template (day 1, about two hours)
We take field measurements, check wall plumb and floor level, and photograph the plumbing and electrical rough-in. In older Richmond homes this is where surprises surface – a wall that’s out of square by an inch and a half, or a floor that slopes toward a former drain. You decide three things before we leave: the cabinet line and door style, the countertop material, and whether the sink stays or moves. Those three answers set the budget and the schedule, so it’s worth thinking them through beforehand.
Stage 2: Demolition and prep (days 2 – 3)
We pull the old cabinets and countertops, protect the flooring, and cap or relocate any lines. If the plan moves the sink or the range, this is when the plumber and electrician come through. In a South Richmond bungalow, that demolition often exposes old galvanized supply lines or cloth wiring that needs attention before new cabinets can go in – better to find it now than behind a finished wall. You’ll approve any change to the scope in writing before we spend a dollar on it.
Stage 3: Rough-in and inspection (days 3 – 5)
New electrical for outlets, under-cabinet lighting, and the dishwasher circuit gets roughed in. Plumbing gets repositioned. The city inspector signs off on the rough work – this is a required stop, and it’s the reason realistic timelines exist. You typically aren’t on site for this stage, but we’ll send photos and tell you the day the inspection passes.
Stage 4: Cabinet install (days 6 – 9)
Boxes get hung, leveled, and shimmed. Doors and drawers follow. This is the first moment the kitchen starts looking like a kitchen again. You’ll confirm hardware placement and any final adjustments to the drawer stack before we lock everything down. For heavier builds – wall ovens, full-height pantry towers – expect the install to stretch an extra day or two.
Stage 5: Countertop template, fabrication, and install (weeks 2 – 4)
Stone and quartz come last because they’re templated from the installed cabinets, not from a drawing. Template day is a single visit. Fabrication and install usually land 10 – 15 business days later. Sink set, faucet hookup, and final caulk finish the job, and then comes the walkthrough. You approve the finished work, not the invoice.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’re choosing between – and what each one really costs you
The material decision drives the budget more than anything else on this job. Here’s the honest trade-off on each path we quote most often in Richmond.
- Stock cabinets (RTA or big-box lines): Lowest cost, fastest delivery – often a week or less. Limited door and finish choices, and the boxes don’t hold up as well to a busy household over a decade. A reasonable fit for rentals or a tight budget that values speed over longevity.
- Semi-custom cabinets (KraftMaid and similar lines): The middle path most homeowners land on. More sizes, more door styles, real configuration flexibility for awkward Richmond layouts. Six to ten weeks from order to delivery, and a modest premium over stock.
- Full custom: Anything you want, at a cost that reflects it. Appropriate when the kitchen is truly irregular or when the design demands a specific look. Long lead times, and worth every dollar only if the scope justifies it.
- Quartz countertops: Consistent look, low maintenance, non-porous. Won’t stain from red wine, but doesn’t love a hot pan set directly on it. Priced in the middle of the stone range and popular in West County homes.
- Granite: Every slab is different, which some buyers love and some find chaotic. It’s heat-tolerant and durable. Requires periodic sealing if you want to keep it looking sharp.
- Laminate or butcher block: Laminate is the budget option and looks better than it used to. Butcher block is warm and forgiving, but needs oiling and can’t sit under a wet sponge for weeks. Both are honest choices if the budget speaks louder than the design brief.
What Cabinets & Countertops costs in Richmond, CA
Most full cabinet-and-countertop projects in Richmond land between $14,000 and $45,000. Cabinet installation alone runs $4,000 – $13,000; countertop installation runs $2,000 – $6,500; a kitchen island, if you add one, is $3,000 – $10,000. The lead range assumes a standard L- or U-shaped kitchen in an existing footprint.
Five things push a job toward the high end:

- Size and layout complexity: Galley kitchens price at the bottom; large kitchens with islands or peninsulas price at the top.
- Existing condition: Out-of-square walls, sloping floors, or hidden water damage behind old cabinets all add labor.
- Relocating plumbing or electrical: Moving the sink or range turns a swap into a rough-in job. Drains are the expensive part; supply lines are more forgiving.
- Material grade: The difference between stock cabinets and semi-custom is often $3,000 – $8,000 on a medium kitchen. Countertop material swings $2,000 – $6,500.
- Permit scope: A straight swap may not require a permit; a layout change with new plumbing and electrical does, and that adds both inspection time and permit fees.
A written estimate from us itemizes cabinets, countertops, labor, demolition, disposal, permits, and any rough-in line items. It does not include unexpected structural repair, appliance purchase, or asbestos abatement if we find it – and in pre-1950 Richmond homes, that last one comes up more often than anyone would like. Ask us about 0% financing for 18 months and $1,000 off projects over $10,000 if the total lands on the higher end.
See the difference
Before
After
Before
After
Before
AfterWhat Richmond homes specifically do to this job
Richmond’s housing stock writes its own rules here. The 1910s – 1940s shipyard-worker bungalows in South Richmond and the Iron Triangle were built tight and small, often with original knob-and-tube wiring and undersized galvanized plumbing – so a cabinet swap in those homes regularly turns into an electrical or plumbing upgrade, because nobody should hang a new pantry over wiring that’s nearly a century old. Out east in Parkview and Verde, the 1950s – 60s stucco tract homes have their own quirks: thicker walls that can complicate cabinet anchors, and the occasional unpermitted addition nobody flagged at closing.
Then there’s Richmond’s industrial legacy. Swaths of former Kaiser Shipyards and refinery-adjacent land mean contractors here deal with contaminated soil, buried fuel tanks, and fill soils that need management plans and DTSC or Bay Area Air Quality permits. If a project requires any foundation work – say, cutting floor for a relocated drain – those conditions matter. Neighboring El Cerrito and San Pablo homeowners simply never touch this. Fog-belt moisture on the bay-facing side of the house is the other local reality: south- and west-facing walls near the water stay damp longer, which is why we check for rot behind old cabinets before we install new ones. We regularly see this in the low-lying flatlands near the shoreline. As part of a full Kitchen Remodeling in Richmond, those damp-side repairs add a week or two of scope. We cover the whole city, and if you’re working from Richmond proper, we’ll be at the doorstep for the estimate.
Serving Richmond, CA – Our Local Coverage Area
We serve Richmond and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Cabinets & Countertops in Richmond

Three to five weeks for a standard kitchen. Countertop fabrication adds the longest single stretch – typically 10 to 15 business days after template day – and cabinet lead times range from a week for stock to ten weeks for semi-custom. Call (833) 700-4611 and we’ll give you a schedule tied to the specific cabinet line you choose.
Straight replacements in the same footprint usually don’t require a permit. Any layout change, plumbing relocation, or new electrical circuit does, and we pull it and stand for the inspection. Older Richmond homes may also trigger retroactive permitting if the layout was modified without one in the past – we’ll tell you upfront if that applies.
Yes, and most of the time it does. A same-layout swap keeps the project shorter and cheaper, typically landing $14,000 – $28,000. Moving a sink, range, or wall turns it into a rough-in project and often bumps the total into the upper half of the range. Call (833) 700-4611 to talk through which path fits your kitchen.
Plan on $14,000 – $45,000. Cabinet installation alone runs $4,000 – $13,000, and countertops add $2,000 – $6,500 depending on the material. The upper end reflects layout changes, material upgrades, and rough-in work; the lower end reflects a straight swap with stock or semi-custom cabinets. Call (833) 700-4611 for an exact quote in writing – estimates are free.
Every project we finish is backed by our 730-Day Done Right Promise. If a cabinet install or countertop seam fails within that window, we come back and make it right at no charge. The material manufacturers carry their own warranties, and we’ll walk you through which brand covers what before you sign. Call (833) 700-4611 to schedule your free estimate.
Ready for a written estimate on cabinets and countertops?
Call (833) 700-4611 for a free on-site estimate. We’ll measure your kitchen, talk through material options, and hand you a line-item number with no surprises. If your project expands into a broader scope, our Kitchen Remodeling service covers the full picture – and homeowners often pair this with a Garage Conversion ADU in Richmond or a New Detached ADU in Richmond down the line. One call gets you a real price.
Written by the team at Groundwork Construction Co. of Richmond.












