







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Albany, CA: What It Costs and How Long It Takes
A chain link fence in Albany, CA typically runs $3500 – $9000 for a standard residential lot, and most jobs wrap up in two to four working days once materials land on site. The number that matters is the linear-foot price, the gauge of the mesh, and whether your property line runs into a slope, a mature tree root zone, or an old lot line that nobody has surveyed in decades. Call (833) 700-4611 and we’ll walk your fence line in person before quoting a dime.

How We Install a Chain Link Fence, Stage by Stage

Chain link isn’t complicated, but the sequencing is where cheap jobs fall apart. A fence that leans in year three was almost always set in soil that wasn’t read properly, or the posts were driven instead of set in concrete. Here’s how the work actually unfolds across a typical Albany job.
Stage 1: Site walk and line verification (day 1, 1 – 2 hours)
We meet you on site, walk the property line, and confirm exactly where the fence goes. On narrow Albany lots this often means pulling the plat map to check against existing markers, since fences from a previous owner may not sit on the legal line. At this stage you decide the fence height (most residential is 4 feet to 6 feet), gate locations, and whether you’re tying into an existing fence or replacing the whole run.
Stage 2: Utility locate and layout (day 1, 30 – 60 minutes)
Before any digging, we call 811 for underground utility marking. Sprinkler lines, old gas stubs, and cable runs are the usual surprises on older East Bay lots. Once flags are up, we string the line and mark post holes on 8-foot or 10-foot centers. You sign off on the layout before we touch a shovel.
Stage 3: Demo and post setting (day 1 – 2)
Old fence comes down and hauls off. Post holes go down 24 to 36 inches depending on soil and wind exposure, and posts get set in concrete before the frame goes up. On Albany’s older lots we frequently hit compacted fill, old concrete footings, or tree roots within a foot of the line, which is where the schedule and the price can shift. Concrete cures overnight into day two.
Stage 4: Frame, mesh, and gates (day 2 – 3)
Top rail, tension bands, and mesh go up. Gates get hung and adjusted so they swing true and latch clean. This is also where you decide on the gate hardware: a standard self-closing hinge and latch versus a keyed lock, and whether you want a walk gate plus a drive gate. Most Albany jobs have one walk gate and one vehicle gate, sometimes two walk gates on a corner lot.
Stage 5: Tensioning, cleanup, and walkthrough (day 3 – 4)
We tension the mesh, check every post for plumb, tighten hardware, and rake the site. Then we walk it with you, explain the 730-Day Done Right Promise in plain terms, and point out anything that needs a follow-up. If your fence ties into a full Fence Installation in Albany project with a different material on another side of the house, we sequence the two so the corners line up.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Chain Link Options You’ll Actually Choose Between
Most homeowners assume chain link is chain link. It isn’t. The choices below are the ones that move both the price and the lifespan, and they’re the ones we walk through on every estimate.
- Mesh gauge: 11.5-gauge is the residential standard and the right call for a backyard. 9-gauge is heavier and noticeably stiffer, better if the fence faces a street, a school, or gets bumped. The cost difference is usually a few hundred dollars on a typical Albany lot.
- Coating: Galvanized mesh is the budget option and lasts well in Albany’s dry summers. Vinyl-coated (usually green or black) adds maybe 10 – 15% to the mesh cost but blends into landscaping and holds up longer in wet winters. Black-coated is the current favorite for street-facing runs.
- Post and top rail: 1⅝-inch line posts and a 1⅜-inch top rail are standard residential. Going heavier on the posts matters more than people think on a windy lot or a fence that has to hold up to a dog.
- Height: 4 feet for a boundary, 5 to 6 feet for privacy or pets. Anything over 6 feet on a residential lot often triggers extra review with the city, which affects the schedule.
- Gates and hardware: A standard walk gate runs $150 – $400 installed on top of the run price, depending on width and self-closing hardware. Drive gates are a separate line item and need a sturdier frame.
- Bottom tension wire vs. bottom rail: Tension wire keeps the mesh tight and stops dogs from pushing under. A bottom rail is cleaner looking and adds cost but holds up better on sloped ground.
On the materials side, we lean on well-established manufacturers for hardware and coating systems rather than bargain-bin imports. Where roofing or outbuilding work pairs with the fence project, we use GAF and CertainTeed products, so the whole exterior of your property reads as one coordinated job.
What a Chain Link Fence Costs in Albany, CA
Plan on $3500 – $9000 for a residential chain link fence in Albany. That range covers a typical 100 – 200 linear-foot lot with one gate, standard 11.5-gauge galvanized mesh, and posts set in concrete. A short backyard run with no demo lands at the low end; a full perimeter with a drive gate, coated mesh, and heavy demo lands at the high end.
What pushes the number up or down:

- Linear footage: the biggest variable. Every additional 50 feet adds roughly $600 – $1,200 depending on gauge and coating.
- Existing fence removal: demo and haul-off of an old wood or chain link fence adds $300 – $900 on a typical lot, more if there’s concrete footings to break out.
- Site conditions: slope, tree roots, old concrete, or compacted fill all slow the dig and add labor. Albany’s tight lots routinely hit one of these.
- Material grade: 9-gauge or vinyl-coated mesh can push the total up 15 – 25% over standard galvanized.
- Gates and corners: extra gates, drive gates, and corner posts add line items. A corner lot with three gate openings is not the same job as a flat back fence.
Every quote is written line-item, upfront pricing, no surprises. What’s included: materials, labor, concrete, demo of one existing fence, and cleanup. What typically isn’t: fence line survey if the property line is disputed, dealing with an in-ground pool or hardscape in the fence run, and any city permit fees if the job triggers review.
See the difference
Before
After
Before
After
Before
AfterWhat Albany Homes Do to This Fence Job
Albany is a small, fully built-out city where nearly every project is an infill job on a tight lot. There’s no greenfield here. That changes this work in concrete ways. The housing stock is dominated by early-20th-century Craftsman and Mediterranean bungalows, 1940s – 50s stucco tract homes, and small postwar ranches, most on narrow lots with detached garages and mature street trees. On blocks near Solano Avenue, we regularly find that 1920s – 40s homes have been added onto piecemeal over the decades, sometimes without permits, so a “simple” fence along a property line can turn into a conversation about where the line actually sits.
Albany’s wet-winter/dry-summer climate matters more than people expect. Posts set in the fall before the rains hold differently than posts set in dry July clay, and we schedule dig days around winter storms. Summer wildfire-smoke days can shut down outdoor work for a day or two, so a fence quoted for three days may stretch to four in August or September. The city’s permitting process is stricter than most of its neighbors, and fence height, lot line proximity, and school-district overlay rules can all come into play depending on where your property sits.
We install chain link across Albany and the surrounding area through our Fence Installation service, and we cover the full city including 94706. Homeowners working on a larger lot or backyard project often pair this with ADU Site Prep & Utilities in Albany so the fence line and the utility trenching get coordinated in one plan. If the back of the house is getting new doors as part of the same push, Door Installation in Albany is a natural add-on. And for anyone planning a broader exterior refresh, this is a good moment to look at Albany as a whole before locking in the scope. Call (833) 700-4611 for a free estimate.
Serving Albany, CA – Our Local Coverage Area
We serve Albany and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Chain Link Fence in Albany

Most residential chain link fence jobs in Albany take two to four working days from post setting to final walkthrough. A short backyard run with no demo can finish in two days; a full perimeter with a drive gate and old fence removal is closer to four. Winter rain can push the concrete cure and add a day.
It depends on height, location, and lot line proximity, and the Albany building department is stricter than most East Bay neighbors about confirming what’s allowed. A standard 4-to-6-foot fence set back from the property line usually doesn’t require a permit, but corner lots, fence-on-slope, and heights above 6 feet often do. We check before quoting so there are no surprises mid-job.
Most chain link installs go in with minimal yard disruption if the existing sprinkler layout is known. We call 811 for utility marking before digging, and we hand-dig around confirmed sprinkler and cable runs. If a sprinkler line has to be rerouted, that’s a small line item, usually $100 – $300.
A typical Albany chain link fence runs $3500 – $9000, with the exact number driven by linear footage, gauge, coating, gate count, and site conditions. Call (833) 700-4611 for an exact quote. Estimates are free and written line-item, with upfront pricing so you see exactly what you’re paying for.
Every chain link fence we install is covered by our 730-Day Done Right Promise. If something’s not right within that window, we come back and make it right. Our technicians have up to 12 years of experience, and all arrive background-checked and in uniform. Call (833) 700-4611 to schedule.
Get a Free Chain Link Fence Estimate in Albany
Call (833) 700-4611 to schedule a free on-site estimate for your chain link fence in Albany. A live person answers around the clock, and we’ll set a time that works. On the visit we walk the line, check for survey issues, and hand you a written line-item quote with upfront pricing and no surprises. $1,000 off projects over $10,000, and 0% financing for 18 months if you need it.
Written by the team at Groundwork Construction Co.












