







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Concrete Driveways & Concrete Work in Albany: What It Takes and What It Costs
Concrete Driveways & Concrete Work in Albany usually means tearing out a cracked, root-lifted slab and pouring a new one, and most residential jobs land between $4,500 and $12,000 for a full driveway installation. Plan on three to five working days from demo to drive-on, plus cure time before you park on it. The number that matters most is the one we put in writing before a shovel touches the ground. Call (833) 700-4611 for a free estimate.

How the job actually runs, stage by stage

Concrete isn’t complicated, but the order of operations is where driveways go wrong. Here’s the real sequence we follow on an Albany pour, with what you decide and when.
Stage 1: Site walk and layout (day 1)
We measure the existing slab, check slope and drainage away from the garage, and note what’s underneath: old rebar, tree roots from the mature street trees that line so many Albany blocks, and any buried irrigation or utility runs. You decide the driveway width and whether we’re matching the existing apron at the sidewalk. This is also when we confirm the thickness we’re pouring.
Stage 2: Demo and haul-off (day 1 into day 2)
Old concrete comes out with a breaker and gets hauled to a recycler; a typical single-car driveway produces several tons of debris. We protect the garage face and any adjacent landscaping, and we hand-dig around anything we can’t identify rather than guess. If a previous owner poured over an old slab or buried a drain line, this is the day it turns up.
Stage 3: Base prep and grading (day 2)
We excavate to depth, compact the subgrade, and bring in crushed base rock, usually 4 to 6 inches depending on soil and traffic. In Albany’s older blocks the subgrade is often disturbingly soft where decades of root growth and old fill sit under the drive, so thickness gets adjusted here. You decide on any drain or channel to move water off the slab. This stage is the one that determines whether your concrete cracks in five years or twenty.
Stage 4: Forming, rebar, and pour (day 3)
Forms go up, rebar or mesh gets tied, and we set control joints so the slab cracks where we want it to. Then the pour. Standard residential thickness runs 4 inches for passenger cars and 5 to 6 inches where a truck or heavy SUV parks. Finish is your call here: broom, light salt, or a scored pattern. We keep the pour out of the hottest part of the day in summer.
Stage 5: Cure and walkthrough (days 3 to 7)
Concrete cures, not dries, and it gains strength over days and weeks. We keep traffic off for the first 24 to 48 hours and keep vehicles off for about a week, longer in cool weather. We walk the finished slab with you, mark the expansion joints, and hand over the written workmanship coverage. Our 730-Day Done Right Promise covers the work; if something’s not right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The choices that decide how your Albany driveway holds up
Nobody picks concrete the way they pick a kitchen faucet, but the spec choices below are the ones that separate a driveway that lasts from one that spalls in six winters.
- Slab thickness: 4 inches handles a car fine; 5 to 6 inches is worth the upcharge where a truck, trailer, or heavy SUV regularly parks. The cost difference is modest, the longevity difference isn’t.
- Reinforcement: welded wire mesh versus rebar grid. Rebar at 18 to 24 inches on center is the better answer on Albany’s root-disturbed subgrades, and it costs more in material and labor.
- Finish: a broom finish is the default, grippy and cheap to maintain. A light exposed-aggregate or salt finish looks sharper and hides tire marks, and it runs higher. A plain troweled surface turns slick in Albany’s wet winters, so we steer away from it outdoors.
- Control joints and expansion: properly placed joints direct the cracking that’s unavoidable in any slab. Skipping joints to save a few hundred dollars is how you get the wandering crack down the middle.
- Drainage: a channel drain or a center crown to move water to the street matters on flat, tight Albany lots where the slab is hemmed in by a fence and a bungalow wall.
- Color: integral color or a shake-on hardener deepens the look and holds up to sun. Surface stains fade and wear through.
Where the driveway ties into a larger hardscape, we fold that scope into the plan rather than treating the pour in isolation. Homeowners often pair this with Driveway & Pavers in Albany when they’re redoing the apron and the walk at the same time.
What Concrete Driveways & Concrete Work costs in Albany, CA
A full concrete driveway installation in Albany runs $4,500 to $12,000, and a straight replacement of an existing drive sits in the $5,000 to $14,000 range once demo and haul-off are included. Smaller concrete work, a new apron, a widened parking pad, or a pad behind the garage, prices lower because the volume is smaller. Here’s the rough breakdown.
| Scope | Typical range |
|---|---|
| Concrete driveway installation | $4,500 – $12,000 |
| Driveway replacement (demo + new pour) | $5,000 – $14,000 |
| Basic sealing of a new or existing slab | $250 – $700 |
What pushes a job toward the high end: square footage first, then thickness and rebar, then how bad the existing slab and subgrade are. Relocating a buried drain, cutting out roots, or hauling spoil up a narrow driveway adds labor. Permits, where the scope triggers one, add cost and time. Color and specialty finishes add material.

A written estimate should spell out the square footage, thickness, reinforcement, finish, and disposal. What it usually won’t include: repairs to damaged landscaping, utility relocation, or drainage structures beyond the basic slope. We put line items in writing so there’s no change-order surprise. Upfront pricing, no surprises. Call (833) 700-4611 for a free on-site estimate.
See the difference
Before
After
Before
After
Before
AfterWhy Albany jobs look different from a greenfield pour
Albany is a small, fully built-out East Bay city, and there is essentially no new construction here. Every concrete job is a replacement, a widening, or a carve-out on a tight 94706 lot, which changes the work. The housing stock runs to 1920s and ’30s Craftsman and Mediterranean bungalows, 1940s – 50s stucco tract homes, and small postwar ranches, many with detached garages at the end of a narrow drive and mature street trees whose roots have been lifting slabs for decades.
Because so much of Albany’s older housing has been added onto piecemeal over the years, we run into unpermitted past work more often than you’d expect under the city’s strict building department, and that can turn a simple driveway replacement into a plan check. Along Solano Avenue and the older residential blocks, checking what’s actually under the slab before we pour is non-negotiable. The wet-winter, dry-summer climate matters too: Albany gets no freeze damage, but the seasonal rain pushes water against garage faces and fence lines, so drainage and grade are as important as the concrete itself. We work all over Albany and the surrounding East Bay, including El Cerrito, Berkeley, Emeryville, and Richmond. You can see our full Albany service coverage and our Driveway & Pavers service for the wider picture.
When a project involves a larger addition or outbuilding, we coordinate the site work in one plan. Homeowners often pair a driveway pour with ADU Site Prep & Utilities in Albany, and with Door Installation in Albany when the garage face is getting a new door at the same time. Modern prefab systems from makers like Plant Prefab and Mighty Buildings are also showing up on Albany infill lots, and their site work has to be planned around the same tight access.
Serving Albany, CA – Our Local Coverage Area
We serve Albany and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: Concrete Driveways & Concrete Work in Albany

Most residential driveways take three to five working days from demo to final walkthrough, then you stay off the slab for a week before parking on it. Weather can add days in the rainy season, and an unpermitted-past-work discovery can stretch the schedule while plan checks clear. Call (833) 700-4611 and we’ll give you a realistic window for your specific lot.
It depends on the scope. A straight replacement in the same footprint often doesn’t need one, but widening the drive, changing the curb cut, or grading that affects drainage can trigger a review from the city’s building department. We check before we pour, so there are no surprises halfway through the job. Call (833) 700-4611 to talk through your project.
Yes, in most cases. The old slab comes out around existing utility runs rather than relocating them, and we hand-dig to confirm what’s buried before we disturb it. If a line is in the way of the new grade, we’ll tell you before we start and price the fix in writing. Estimates are free; call (833) 700-4611.
A full concrete driveway installation in Albany typically runs $4,500 to $12,000, with replacement work in the $5,000 to $14,000 range once demo and disposal are factored in. Thickness, reinforcement, finish, and the condition of the subgrade move the number. Call (833) 700-4611 for an exact quote, estimates are free.
Every project is backed by our 730-Day Done Right Promise, one of the longest workmanship guarantees in the residential construction space. If something isn’t right, we make it right. Our technicians are background-checked and arrive in uniform, and calls are answered by a live person 24/7. Call (833) 700-4611 to schedule your free estimate.
Ready for a real number on your Albany driveway?
Call (833) 700-4611 to schedule a free on-site estimate for Concrete Driveways & Concrete Work in Albany. On the call, we’ll set a time to walk the slab, talk through thickness and finish, and give you a written line-item quote with the price locked in. Financing is available at 0% for 18 months, and projects over $10,000 get $1,000 off. Straight answers, no pressure.
Written by the team at Groundwork Construction Co.












