







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterFrameless Glass Shower Enclosures in Richmond, CA
Frameless glass shower enclosures are custom-cut glass panels joined with minimal metal hardware, and in Richmond they typically cost between $2,400 and $5,800 installed, depending on glass thickness, door style, and the condition of the shower opening. Unlike a framed unit, there’s no bulky aluminum trim to collect soap scum or hide a bad tile line. The glass is the wall, which means every measurement, every anchor point, and every screw has to be right the first time. That’s the part most homeowners underestimate. Call us at (833) 700-4611 and we’ll walk you through what’s realistic for your bathroom.
We do a lot of these as the finishing piece of a larger Bathroom Remodeling in Richmond project, and we also install them as standalone upgrades when the tile and waterproofing are already sound. Either way, this is finish carpentry masquerading as glass work. A quarter-inch out of plumb over a 5-foot panel and the door swings open on its own. Our technicians have up to 12 years of experience setting these, and every install is backed by our 730-Day Done Right Promise. If a hinge pulls loose or a seal fails before the two-year mark, we come back and make it right.
Key Takeaways
- Frameless enclosures in Richmond run roughly $2,400 to $5,800 installed, with 3/8-inch glass near the low end and 1/2-inch panels with premium hardware near the top.
- The glass itself is usually only about 35-45% of the total price. Templating, waterproofing fixes, and hardware make up the rest.
- Old Richmond homes near the Iron Triangle and Southside often have out-of-square shower openings, which adds prep cost but is fixable.
- Most standard installations are completed in a single visit; custom-templated glass needs a separate lead time of about 7-14 days for fabrication.
- Every job comes with our 730-Day Done Right Promise, upfront pricing, and live phone coverage 24/7.

When You Need Frameless Glass Shower Enclosures
People call us about glass for a handful of recurring reasons. Some are cosmetic, some are structural, and a couple are the kind of thing that gets worse the longer you wait. Here’s what we hear most in Richmond.
- Your shower feels like a dark closet. A framed enclosure with frosted glass and heavy trim eats light. Homes in the Point Richmond hills and along the Marina Bay corridor often have small interior bathrooms with one tiny window, and swapping to clear frameless glass is the single biggest change you can make to how bright that room feels.
- The old frame is corroding or moldy. Richmond’s marine air and fog keep interior humidity high, and that aluminum channel around an old shower door traps water. Once you see rust streaks or black mold creeping behind the trim, the frame has been failing for a while. Frameless eliminates that channel entirely.
- You’re mid-remodel and the tile is going in. This is the ideal time. When frameless glass is part of the plan from day one, we set the blocking and curb correctly so the glass has something solid to attach to. Retrofitting after the fact sometimes means opening a wall. Our home remodeling team coordinates the whole sequence so the glass order lands after the final tile grout cures.
- Your shower door won’t stay closed or swings on its own. That’s usually a sign the original install was off-level or the hinges are worn past their service life. On older framed units it’s a common failure. We diagnose whether it’s a hardware swap or a full replacement.
- You want a walk-in or curbless look. Aging-in-place and accessibility upgrades are a big driver in Richmond, especially in single-story homes near Nicholl Park. A frameless walk-in panel with no swing door is easier to enter and clean.
- You’re selling or refinishing before a listing. A clean frameless enclosure reads as an expensive bathroom in photos, and buyers notice. It’s one of the higher-return cosmetic upgrades in a bathroom refresh.
Our Frameless Glass Shower Enclosures Process
There’s a sequence to this, and skipping steps is how you end up with a door that leaks or a panel that cracks six months in. Here’s how we run it from first call to final walkthrough.
- On-site measurement and feasibility check. We measure the shower opening, check the walls for plumb and square, confirm the curb height, and inspect whether the existing waterproofing is intact. Out-of-square openings are common in Richmond’s older housing stock, and we tell you upfront whether the glass can be cut to fit as-is or whether the walls need correction first. This is also when we quote you a real number, not a range that grows later.
- Material and hardware selection. You’ll choose glass thickness (3/8-inch or 1/2-inch), finish (clear, low-iron, frosted, or reeded), and hardware (chrome, brushed nickel, matte black, or brass). We work with established glass fabricators and suppliers, and we’ll show you samples rather than describing finishes over the phone. Low-iron glass costs a bit more but stays clearer over time, which matters in a bathroom with limited daylight.
- Prep and waterproofing correction, if needed. If the curb is too low, the tile isn’t set on a proper substrate, or there’s no blocking behind the attachment points, we fix it before any glass is ordered. This is where most of the surprises live, and it’s why we inspect before we fabricate.
- Final templating and fabrication. For custom enclosures, we template the opening once the tile is fully set. The glass is cut and tempered to those exact dimensions, usually within 7-14 days. Tempering is permanent; you can’t drill or cut it afterward, so the template has to be dead-on.
- Installation day. We set the panels, level the hinges, align the door so it swings and closes with a light touch, and seal the edges with clear silicone. Most standard installations are done in a single visit. We clean up, haul away packaging, and walk you through the care instructions.
- Final walkthrough and guarantee handoff. We test the door, check the seals, and leave you with written coverage under the 730-Day Done Right Promise. If anything shifts or fails in that window, you call and we return.
One thing we say plainly: frameless glass is heavy, tempered, and unforgiving. A 1/2-inch panel can weigh well over 100 pounds, and a chip or a bad lift can shatter it. This isn’t a weekend DIY project for most homeowners. Installation requires two people, proper suction-cup lifts, and knowledge of how to set hinges so the weight is carried by the wall blocking, not the glass edge. We handle the lifting, leveling, and sealing for you.

Frameless Glass Shower Enclosures Pricing in Richmond
Frameless glass shower enclosure installation in Richmond typically runs $2,400 to $5,800, with most standard alcove showers landing around $3,200 to $4,000. The glass is the headline cost, but it’s rarely the whole bill. Here’s how the numbers break down so you can budget with real figures instead of guesswork.
| Line Item | Typical Range |
|---|---|
| Glass panels (3/8-inch, clear, standard sizes) | $900 – $1,600 |
| Glass upgrade to 1/2-inch or low-iron | +$300 – $800 |
| Hinges, handles, brackets, and door hardware | $250 – $650 |
| Custom templating and fabrication | $200 – $500 |
| Waterproofing or curb correction (if needed) | $300 – $900 |
| Professional installation and sealing | $600 – $1,200 |
| Removal and disposal of old enclosure | $100 – $250 |
What pushes a job toward the top of that range? Size and complexity are the biggest factors. A single fixed panel in a small alcove is on the low end, while a neo-angle corner shower with a swing door, a return panel, and a transom above runs higher. Glass thickness matters too: 3/8-inch is standard and perfectly durable, but 1/2-inch feels more substantial and needs heavier hardware. Then there’s the condition of what’s underneath. A shower that’s out of square, has a failing curb, or lacks proper wall blocking adds prep cost, but it’s prep you can’t skip.
Richmond has some specific cost drivers worth knowing. Homes built before 1960, which is a big share of the housing stock in neighborhoods like the Iron Triangle and Santa Fe, frequently have shower alcoves that were never square to begin with. Fixing that is real work, but it’s also why a frameless install on an older home can outlast a quick retrofit. We give you the number before we start, and that number doesn’t move. Upfront pricing, no surprises. Projects over $10,000 qualify for $1,000 off, and we offer 0% financing for 18 months so a full bathroom refresh doesn’t have to be a lump-sum hit.
Want an exact figure for your shower? Call (833) 700-4611 or request a free project estimate and design consult. We’ll measure, quote, and answer your questions in plain language.
FAQs – Frameless Glass Shower Enclosures
How much does a frameless glass shower enclosure cost in Richmond?
Frameless glass shower enclosures in Richmond typically cost $2,400 to $5,800 installed, with most standard alcove showers landing between $3,200 and $4,000. The glass itself is about 35-45% of that, and the rest covers templating, hardware, prep, and installation. Heavier 1/2-inch glass or custom neo-angle configurations push toward the top of the range. Call (833) 700-4611 for an exact quote on your bathroom; estimates are free.
How long does installation take, and can you do it in one visit?
Most standard frameless enclosures are installed in a single visit, usually three to five hours once the glass is on site. The lead time you’ll plan around is fabrication: custom-templated glass needs about 7-14 days to be cut and tempered after we take final measurements. If your shower opening is a standard size and we’re replacing an existing unit, the timeline is shorter. Call us and we’ll give you a real schedule based on your setup.
Can you install frameless glass over my existing tile?
Yes, in most cases, as long as the tile is solid, the waterproofing behind it is intact, and there’s proper blocking where the hinges attach. We inspect all three before ordering glass. If the curb is too low or the wall behind the shower has no structural backing, we correct that first. Installing glass onto a failing substrate is how enclosures end up leaking or pulling loose, so we don’t skip the check. Call (833) 700-4611 and we’ll assess it during a free estimate.
Is it cheaper to repair or replace my glass shower enclosure?
Replacing is usually the better call when the existing glass is framed, the hardware is corroded, or the door no longer seals. Repair makes sense only when a single hinge, handle, or seal has failed and the glass and frame are otherwise sound. Because frameless glass can’t be drilled or altered after tempering, repairs on old framed units are limited anyway. We’ll tell you honestly which path makes sense for your bathroom. Call us for a free assessment before you spend anything.
Whether you’re finishing a full gut renovation or just upgrading the shower in a 1950s Richmond bungalow, frameless glass is the detail that makes the room feel finished and lets the light in. Our technicians have up to 12 years of experience setting these enclosures, every installation is backed by the 730-Day Done Right Promise, and our line is answered by a live person 24/7. We work with trusted material partners across the trades, so the hardware and glass you pick are quality choices, not whatever happened to be in stock. From foundation to finish line, we handle it as one project. Call (833) 700-4611 today for your free estimate and design consult, and let’s get your bathroom the enclosure it deserves.
Written by the team at Groundwork Construction Co. of Richmond, serving Richmond.


