







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterImpact French Doors Cost in Richmond, CA: Real Installed Numbers for Older Bay-Area Homes
Expect $3,000 to $5,500 installed for a standard impact-rated French door in Richmond, and $6,500 to $11,000 for premium units like Marvin or Andersen with multi-point locking and true divided light. Those national numbers assume a clean, square rough opening. On this city’s older homes they rarely hold. Call Groundwork Construction Co. of Richmond at (833) 700-4611 and we’ll give you the real installed figure before we touch anything.
That $3,500 French door quote you saw online assumes a clean, square opening and a solid threshold. On a 1930s Richmond craftsman with fog-side rot and a settled foundation, the honest number starts closer to $5,500. Knowing why before you call anyone for a quote saves a lot of frustration.

Why Richmond Quotes Come In Higher Than the National Average
The flatlands here hold the answer. South Richmond bungalows and Iron Triangle craftsmans built for shipyard workers between the 1910s and 1940s have rear-elevation thresholds that sit at or within an inch or two of grade. Cool, fog-influenced summers and wet winters push moisture straight into that exposed wood. We open up rear doors in South Richmond and find rotted sills and soft threshold plates more often than not. A new door can’t go on top of that rot and stay watertight, so the price includes full sill and threshold replacement before anything gets hung.
Then there’s the frame itself. Balloon-frame and early platform construction used non-standard stud spacing and header sizing that no modern pre-hung unit was cut for. That means custom shimming, sometimes header reinforcement, occasionally a framing modification before the door will sit square and plumb. None of that shows up in national cost guides, which is exactly why the online average feels low when you’re standing in a Richmond kitchen looking at a warped opening.
If you’re comparing this against other exterior work, our Windows & Doors page covers the broader picture, and the Richmond service area page shows the neighborhoods where these threshold problems are most common.
Impact French Door Cost Ranges in Richmond
Here’s what installed cost looks like across the range, materials included. One caveat: if hidden rot or framing trouble surfaces mid-install, that work gets quoted separately and in writing before it moves forward. Upfront pricing, no surprises.
| Door / Scope | Installed Cost Range |
|---|---|
| Standard impact-rated French door (fiberglass or wood-clad aluminum), straight swap | $3,000-$5,500 |
| Premium Andersen or Marvin unit with multi-point locking, up to true divided light | $6,500-$11,000 |
| Threshold and sill replacement (rot repair) | Quoted after inspection |
| Framing modification or header reinforcement for non-standard opening | Quoted after inspection |
| Full impact window package (for whole-home comparison) | $8,000-$25,000 |
What drives the number in each direction
- Unit size and species. A standard 5-foot double door sits at the low end; a wide 8-foot slider-style French system with premium finish climbs toward the top.
- Threshold condition. A rock-solid sill from a 1960s Parkview tract home needs far less work than a fog-soaked original on a South Richmond bungalow.
- Opening geometry. Square and plumb means a straightforward hang. Out of square means shimming, reinforcement, and time.
- Hardware. Multi-point locking and divided light push labor up, but they’re the details that hold a seal through years of bay-driven wind.

What “Impact-Rated” Actually Means in California
California code already requires safety glazing on doors, so every exterior door sold here has tempered or laminated glass. That’s the floor, not the ceiling. Impact-rated French doors sit above that line, with tested performance for air and water infiltration, stronger security, noticeably less traffic noise, and a seal that survives years of fog-belt moisture and winter storms blowing in off the bay.
That ratings label is where the cheap doors and the quality doors part company. A door with a lab-tested air infiltration rating and a properly flashed, sealed threshold will keep water out for years. A budget unit with a thin gasket and no test data will leak at the sill within a couple of seasons, and by then the damage is into the framing. Groundwork specifies Andersen and Marvin French door systems for exactly this reason. Both publish their tested air and water performance, and both stand up to Richmond’s damp winters. Every install is covered by the 730-Day Done Right Promise, so if a threshold seal fails in year one, we make it right at no cost.
Common Richmond Scenarios We See
Every older home has its own story, but the pattern repeats.
The South Richmond bungalow with a soft sill. Rear threshold sits near grade, and decades of fog moisture have turned the sill plate to sponge. A straightforward swap turns into sill replacement before we can hang a new door. We catch it during inspection so it never surprises the homeowner mid-job.
The Iron Triangle craftsman with a non-standard opening. Old header is sized for a door that was never made to a modern standard. New unit won’t sit square without framing adjustment. We plan for it, quote it in writing, and build the shim and reinforcement into the scope.
The unpermitted 1940s conversion. Plenty of these old flatlands homes have a bonus room or enclosed porch that was converted without permits back in the shipyard era. When a door replacement touches that opening, we flag the permit picture early so there’s no plan-check scramble halfway through the project.
The Groundwork Standard, From First Call to Final Seal
We’ve been doing this work since 2014, and the approach has stayed the same: protected materials, background-checked technicians in uniform on every job, and a live person answering the phone around the clock, not a voicemail until Monday. Our technicians bring up to 12 years of hands-on experience, and that’s the kind of detail that makes the difference when an older opening fights back.
Financing runs at 0% for 18 months, and projects over $10,000 get $1,000 off. Alongside the door work, our teams handle kitchen remodeling in Richmond, bathroom remodeling in Richmond, and home additions and ADU construction in Richmond, so a door replacement can fold into a larger exterior and interior plan without juggling multiple contractors. Many homeowners pair the door work with fresh hardscape; if that’s on your list, our driveway and pavers work in Richmond uses Techo-Bloc and Cambridge Pavers on the front elevation. For roofing up top, roofing in Richmond is handled by the same team, and exterior hardscape around the door landing ties in with fence installation in Richmond and the paver patio work we do across the city. Neighbors just across the line use our El Cerrito service, and the same threshold problems show up in San Pablo homes and Albany bungalows too. From foundation to finish line, it’s one call, one accountable team.
FAQs
Plan on $3,000-$5,500 installed for a standard impact-rated fiberglass or wood-clad French door, and $6,500-$11,000 for a premium Andersen or Marvin system with multi-point locking and true divided light. Older homes in the bay-facing flatlands often land at the higher end once threshold and framing repairs are included. Call (833) 700-4611 for a free estimate on your specific opening.
Repair is usually the cheaper call when the frame and glass are sound and only the hardware or weather seal has failed. Once the sill or threshold is soft, replacement wins on cost over time, because patching rot only delays the framing damage. We inspect before recommending either path. Call (833) 700-4611 and we’ll tell you straight which one makes sense for your door.
Most straight swaps finish in a single visit when the opening is square and the threshold is solid. If we find rot or need framing adjustment, the job takes longer, and we say so upfront instead of surprising you mid-install. Either way, upfront pricing means the number you see is the number you pay. Call (833) 700-4611 to schedule a look.
Rear doors on South Richmond and Iron Triangle bungalows often sit within an inch or two of grade, and fog-belt moisture plus winter rain rots the sill and threshold plate over decades. A new door can’t be hung watertight on a failed sill, so replacement comes first. We flag it during inspection and quote the repair before we order anything. Call (833) 700-4611 to book an inspection.
Ready for a straight answer on your French door cost? Call Groundwork Construction Co. of Richmond at (833) 700-4611 for a free project estimate and design consult. We’ll walk your opening, explain the threshold and framing picture, and hand you an upfront number in writing. No surprises, backed by the 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co. of Richmond, serving Richmond, CA.
What Our Customers Say
"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."
- Laura Bennett"He pulled the permits himself, scheduled every sub and ran the inspections. I made one decision a week and otherwise stayed out of it, which is exactly what I was paying for."
- Robert Sullivan"Change orders were written down and priced before the work happened, every single time. No surprise at the end."
- Keisha Robinson












