







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow Much Does New Window Installation Cost in Richmond?
New window installation in Richmond costs $4,500 – $15,000 for a typical whole-home replacement, with most single-family homes landing near $8,200 for seven to ten units. Single window replacements run $450 – $1,200 each, while impact-rated windows in the hillside and wildfire interface zones push toward the upper band of $8,000 – $25,000 for a full house. Those numbers include removal, disposal, and finish work for standard vinyl and fiberglass units; wood-clad and custom sizes move the total up.
We quote upfront pricing, no surprises – the number you see is the number you pay. Every install carries our 730-Day Done Right Promise. Call (833) 700-4611 for a free project estimate and design consult.

New Window Installation Cost Breakdown (2026)
Here’s how the line items stack up for Richmond homeowners in 2026. These ranges reflect what independent licensed installers charge in this market, not national averages.
| Line Item | Typical Richmond Range (2026) |
|---|---|
| Single standard window (vinyl, insert) | $450 – $900 |
| Single standard window (vinyl, full-frame) | $700 – $1,200 |
| Single wood-clad window (Andersen/Marvin) | $900 – $1,600 |
| Whole-home replacement, 7 – 10 windows | $4,500 – $15,000 |
| Whole-home, wood-clad or fiberglass | $9,000 – $22,000 |
| Impact window installation (full home) | $8,000 – $25,000 |
| Bay or bow window | $2,500 – $6,500 |
| Egress window (basement/bedroom) | $3,000 – $6,500 |
| Trim, casing, and interior finish | $400 – $1,800 |
| Stucco or plaster repair at opening | $300 – $1,200 |
| Permit (Richmond building dept.) | $150 – $600 |
| Lead-safe containment (pre-1978 homes) | $400 – $1,500 |
What pushes the price up? Frame type is the biggest lever. A full-frame window replacement costs 30% to 50% more than an insert because the crew pulls the entire window out to the studs, rebuilds flashing, and redoes exterior trim. That matters in Richmond’s older stock – much of the housing built in the 1920s through 1950s had wood double-hung windows set into plaster and stucco, and replacing those without touching the wall means an insert, while replacing the whole opening means frame work, stucco patching, and a permit. Wood-clad units from Andersen and Marvin sit above vinyl on the price ladder but hold up better against Richmond’s damp winters. Impact glass adds roughly 40% to 60% over standard glazing. Custom sizes, unusual shapes, and second-story access all add labor hours.
What Affects New Window Installation Pricing in Richmond
- Home age and wall construction. Homes in the older flats neighborhoods – Point Richmond, the Iron Triangle, and the corridors near Barrett and Macdonald – frequently have plaster interiors and stucco exteriors. Cutting a new opening or resizing one there adds patching and finish work that a drywall-and-siding home won’t need. In Natomas-style newer subdivisions, the opposite is true: gypsum board and vinyl siding come apart fast, and the job stays lean.
- Exterior finish match. Richmond has a wide mix of stucco, wood shingle, and painted siding. If your exterior is original stucco, expect $300 – $1,200 in matching work around each opening. The crew has to blend texture, not just caulk.
- Lead-safe requirements on pre-1978 homes. Any home built before 1978 needs lead-safe practices during window removal, which adds containment, HEPA vacuuming, and disposal costs. It’s not optional, and it’s not something to skip to save a few hundred dollars.
- Coastal and hillside exposure. If your home looks out over the bay toward the Richmond-San Rafael Bridge or sits up in the hills near Wildcat Canyon, you’re getting wind-driven rain and salt air. That argues for better weatherstripping, a marine-grade finish, and impact glass in fire-rated zones. Don’t cut corners on the wind rating here – the drop from a 30-pound design pressure to a 25 can cost you a window in a hard storm.
- Number of openings and matching. The more windows you replace at once, the lower your per-unit cost, because setup, mobilization, and trim runs all amortize. Replacing two windows costs more per unit than replacing ten. If you’re doing a phased replacement, group windows by façade.
- Permits and inspection. Richmond’s building department requires permits for new openings and for full-frame replacements; simple insert replacements in existing openings often don’t. Permit fees run $150 – $600 for a residential window job, and plan review can add a week or two to the schedule. Factor that into your timeline.

Why Window Pricing in Richmond Looks Different From the National Numbers
If you’ve compared our ranges to what you find on national home-improvement sites, you’ll notice ours run a bit higher on the low end. That’s the Richmond market, not markup. Labor in the East Bay costs more than in the Central Valley or the Midwest. Stucco repair is a real line item here because most of the housing stock has it. And wildfire-interface construction standards apply to a meaningful slice of Richmond homes, which is not true everywhere in California.
We also want to be honest about what “new window installation” can mean. For a homeowner on a tight budget, it can mean replacing the failing windows one room at a time. For a homeowner doing a larger remodel, it can mean all-new openings with structural changes. Both are legitimate, and both start with a free estimate so you know which one you’re actually looking at.
How to Save on New Window Installation in Richmond
- Bundle the whole house. A ten-window job typically prices 15% to 25% lower per opening than three single-window calls spread across a year. If half your windows are failing, do them together.
- Choose insert replacement where it fits. If your existing frames and flashing are sound, an insert saves you the frame work, stucco patching, and sometimes the permit. It’s not right for every home, but it’s worth asking about.
- Time it off-peak. Late winter and early spring are slower for installer schedules in the East Bay. That’s when you have the most flexibility on scheduling and can sometimes negotiate scope – though we price the same regardless of season.
- Take advantage of the standing offers. Our $1,000 off projects over $10,000 and 0% financing for 18 months are both live and both apply to window jobs. A $12,000 whole-home install with the $1,000 discount and 18-month no-interest financing is a materially different cash-flow picture than paying upfront.
- Ask about energy rebates. Some energy-efficient window upgrades qualify for federal tax credits or utility rebates. We can point you toward what’s currently available in the 2026 cycle, but the application is yours to file.
Every window job starts with a free project estimate and design consult. Call us at (833) 700-4611 – a live person answers any hour, any day.
What to Expect During Your Window Installation
Most single-room and small whole-home window replacements finish in one day. Larger full-frame jobs, especially those involving new openings or significant stucco work, run two to three days. Our technicians are background-checked, arrive in uniform, and walk you through the plan before anyone picks up a pry bar.
On installation day, you’ll see floor protection go down first, then the old units come out. The crew checks the rough opening for rot, damage, or signs of water intrusion – if there’s an issue behind the wall, you hear about it immediately, not at the final walkthrough. New flashing goes in, the window sets, and the exterior finish closes up. Interior trim and casing go on last.
When the job wraps, you get a walkthrough. Every window gets opened, closed, and checked for operation. You confirm the locks work. You confirm the screens fit. If anything is off, it gets fixed under the 730-Day Done Right Promise – and if it fails later, we come back. That’s the whole point of writing the guarantee down.
We also want to flag that window replacement touches a genuinely risky part of a home. If your home is old and the exterior stucco is compromised, or if the opening is above the first floor, that’s a job for a crew with ladders, fall protection, and the right permits. We don’t recommend homeowners try to swap a window themselves. A fallen window or a mis-set flashing detail is a water intrusion problem that shows up a year later.
How to Read a Window Estimate Without Getting Burned
The complaint we hear most often isn’t about price – it’s about scope. Homeowners get three bids that all say “$8,500” and can’t tell them apart, then get a call mid-job that says “we found rot, that’s another $2,000.” Upfront pricing means the number you see is the number you pay, with scope disclosed in writing. When you’re comparing Richmond window estimates, check five things:
- Is the manufacturer and model named? “Energy-efficient glass” means nothing. “Andersen 400 Series, Low-E4, argon-filled,” means something.
- Is removal and disposal included? Some bids leave it out and bill it separately.
- Is trim and casing included? Especially interior. It’s a common add-on.
- Is stucco or siding repair included, or excluded? Get it in writing either way.
- What’s the warranty? Workmanship and product are separate. Our workmanship is covered for 730 days. Manufacturer warranties on the product run longer and are separate.
A quick call at (833) 700-4611 for a free estimate gives you a scope you can compare against anyone else’s – apples to apples.
FAQs – New Window Installation Cost
How much does new window installation cost in Richmond in 2026?
Whole-home window replacement in Richmond runs $4,500 – $15,000 for standard vinyl and $9,000 – $22,000 for wood-clad or fiberglass units. Single window replacements cost $450 – $1,200 each depending on frame type and size. Impact window installation pushes the range to $8,000 – $25,000 for a full house. Call (833) 700-4611 for an exact quote on your home – estimates are free.
Is it cheaper to replace just one window or the whole house?
The whole house is cheaper per window. A single window replacement costs $450 – $1,200, but a 10-window job averages $6,000 – $11,000 – roughly $600 – $1,100 per opening, with less overhead per unit. If you can swing the full job, the math favors it. Call (833) 700-4611 to price both scenarios for your Richmond home.
How long does window installation take?
Most small and medium window jobs finish in one day. Larger full-frame jobs, new openings, or homes with significant stucco repair run two to three days. A single window typically takes 3 – 5 hours. Schedule a free estimate at (833) 700-4611 and we’ll give you a realistic timeline for your home.
Do I need a permit for window installation in Richmond?
Full-frame replacement and new window openings require a permit; simple insert replacements in existing openings typically do not. Richmond permit fees run $150 – $600 for residential window work. We handle the permit in any job that needs one. Call (833) 700-4611 and we’ll tell you which category your project falls into.
What’s included in the price – trim, repair, and disposal?
Our estimates include removal, disposal, standard trim, and minor stucco or siding touch-up; larger repair work is scoped and priced line-by-line so you see it upfront. Some competitors exclude trim or repair, so compare scopes, not just totals. Call (833) 700-4611 for a scope you can compare.
Can you install impact windows in Richmond?
Yes. Impact window installation runs $8,000 – $25,000 for a full home in Richmond, and we install Andersen, Pella, and Marvin units wherever the construction standard calls for them. If your home sits in a fire-interface zone or you want extra storm protection, that’s worth discussing during the estimate. Call (833) 700-4611 to review your options.
Why Homeowners in Richmond Call Us
We know this market. We know the difference between a Point Richmond craftsman and a Natomas subdivision. We know why a window install on a hillside home near Wildcat Canyon needs different flashing than one on the flats. That local read is what keeps installs from leaking a year later. Trusted brand partners – Andersen, Pella, Marvin, and dozens more across every trade – mean you’re choosing quality, not just whatever’s in stock. And with 0% financing for 18 months and $1,000 off projects over $10,000, large-scale remodels stay within reach.
Our technicians have up to 12 years of experience on residential installs and arrive uniformed, background-checked, and ready to do the job right. From foundation to finish line: if your window project is part of a larger remodel – say a kitchen renovation or a bathroom overhaul – a single contractor handles the whole scope. That’s how we work, and it’s why so many Richmond homeowners start with us and stay.
Call (833) 700-4611 for a free project estimate and design consult. A live person answers any hour, any day. And if the job doesn’t hold up, the 730-Day Done Right Promise means we come back – built to last, backed in writing.
Pricing reflects the Richmond market as of 2026. Groundwork Construction Co. of Richmond offers free estimates – call (833) 700-4611.
What Our Customers Say
"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."
- Laura Bennett"He pulled the permits himself, scheduled every sub and ran the inspections. I made one decision a week and otherwise stayed out of it, which is exactly what I was paying for."
- Robert Sullivan"Change orders were written down and priced before the work happened, every single time. No surprise at the end."
- Keisha Robinson












