







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWood Fence Cost Per Foot in Richmond, CA: What You’ll Actually Pay
Wood fence installation in Richmond runs $28-$65 per linear foot installed, depending on species and site conditions. Dog-ear pine lands at $28-$38/ft, treated lumber alternatives at $32-$45/ft, cedar at $38-$52/ft, and redwood at $48-$65/ft. Most residential Richmond fence jobs land in the $3,500-$9,000 range, with post-set depth and sealing driving the final number. Call (833) 700-4611 for a free, upfront quote – we answer live, day or night.
Here’s what the per-foot math doesn’t tell you: on this side of the hills, the species you pick and the way it’s sealed decide whether you’re replacing that fence in seven years or twenty.

Why a Richmond Fence Ages Twice as Fast as an Inland Fence
A cedar fence in Walnut Creek can last 20 years. The same fence on a south- or west-facing lot here, with morning fog rolling off the bay and salt air settling into the grain, can start showing gray, checking, and rot at year 7 if it wasn’t specified and sealed correctly from day one. The up-front cost is identical. The 15-year cost is not even close.
The failure mechanism is specific. Persistent morning fog deposits moisture in the end-grain at picket tops and at post bases – the two spots where water sits longest and dries last. That trapped moisture kicks off fungal decay from the inside, and by the time you see soft wood or a gray surface on a Richmond fence, the rot has usually been working for a couple of seasons. This is the fog-belt reality that separates a fence built for Richmond from a fence built for Pleasanton.
Species choice is a durability decision here, not a color preference. Redwood’s natural tannins resist decay from the inside out; cedar’s natural oils do similar work. Pine without proper pressure treatment fails predictably fast in this microclimate. That’s the whole reason the per-foot spread between pine and redwood is roughly $20/ft – you’re not paying for looks, you’re paying for years.
Wood Fence Cost Per Foot in Richmond: Line-Item Pricing
These are installed ranges for typical Richmond residential lots, materials and labor included. Yard gates, removal of an old fence, and steep or obstructed runs push toward the high end.
| Fence Type / Specification | Installed Cost Per Linear Foot |
|---|---|
| Dog-ear pine, standard height | $28-$38 |
| Treated lumber alternative | $32-$45 |
| Cedar, standard privacy height | $38-$52 |
| Redwood, premium decay resistance | $48-$65 |
| Elevated / drainage-relief post bases (add per post) | +$8-$15 each |
| 36-inch post depth with concrete (flatlands bay-mud soil) | Higher per-foot, quoted on site |
| Typical full residential job, total | $3,500-$9,000 |
If you want a side-by-side of material options, our Fence Installation in Richmond page walks through the choices, and our main Fence Installation service page covers the process end to end. For the broader home scope we handle from foundation to finish line, start at the home page.

Two Decisions That Change Your Lifecycle Cost More Than the Species
Homeowners comparing three quotes on wood fence cost per foot almost always focus on the pickets. The two moves that actually decide how long the fence stands are below grade, and they’re where cheap bids quietly cut corners.
1. Post-base treatment is your highest-leverage call
Concrete collars poured tight against the post base hold moisture against the wood – a recipe for rot on a wet flatlands lot. Proper drainage-relief or elevated Simpson-style post bases let water drain away instead of wicking up the grain. They add roughly $8-$15 per post. On a fence with a dozen posts, that’s a modest line item that can double the life of the posts in Richmond’s wet lowlands. If a bid doesn’t mention how it’s handling post bases, ask.
2. Post depth in bay-mud soil
Richmond’s flatlands sit on expansive bay-mud soils, and a standard 24-inch post set in that ground produces a fence that leans within two to three years – you’ve seen them in the older neighborhoods, rails racked out of square and pickets gone gap-toothed. The correct spec is 36-inch depth with concrete augmentation. It costs more per post, and it’s the number one thing worth knowing before you compare quotes. This is also where the region’s heavy-industrial legacy matters: on former shipyard-adjacent and waterfront-adjacent lots, fill soils and buried infrastructure can affect where and how you set posts, so an honest installer checks the ground before quoting, not after.
What a Fence Quote Should Include – and What “Upfront Pricing” Means to Us
The per-foot number is only useful if it’s the number you actually pay. Groundwork Construction Co. of Richmond quotes with no-hassle upfront pricing: the number you see is the number you pay, with no surprise add-ons mid-job. Our technicians have up to 12 years of experience, they’re background-checked and arrive in uniform, and every project is backed by our 730-Day Done Right Promise – one of the longest workmanship guarantees in the residential construction space.
For fences, that means the things that matter most are covered in writing: post-set integrity and water-seal application. If a fence starts leaning or rotting at the base in year one, it’s addressed, not argued about. We also carry quality material partners because the wood has to earn its place in this climate – build it to last, back it in writing.
A clean quote should spell out:
- Species and treatment level of pickets, rails, and posts, written down
- Post depth and base method – 36-inch with drainage relief, or it’s a callback waiting to happen
- Sealing schedule – what’s applied at install and when it’s re-coated
- Old fence removal and haul-away, itemized
- Gate hardware, framing, and height
- Warranty terms, in plain language
Planning a wider yard or outbuilding alongside the fence? We handle driveway and paver work and home additions and ADUs on the same scope, and we’re glad to coordinate access so the fence and the hardscape don’t fight each other. Larger projects over $10,000 also qualify for $1,000 off, and we offer 0% financing for 18 months to spread the cost.
Frequently Asked Questions About Wood Fence Cost Per Foot in Richmond
Wood fence in Richmond runs $28-$65 per linear foot installed, with pine around $28-$38/ft, treated lumber at $32-$45/ft, cedar at $38-$52/ft, and redwood at $48-$65/ft. Call (833) 700-4611 for an exact quote on your lot – estimates are free.
Repair usually wins when the damage is isolated to a few pickets or one section, but replacement makes more financial sense once posts are soft at the base or you’re sealing a fence that’s already failing. Because fog-belt rot spreads along the end-grain, a “cheap” patch on a rotting fence often just delays the inevitable. A free on-site look settles it fast – call (833) 700-4611.
Redwood holds up best, followed by cedar – both resist decay naturally – while untreated pine fails fastest in this microclimate. The species matters, but post-base drainage and a proper seal schedule matter just as much. We’ll spec the right combination for your lot’s exposure. Call (833) 700-4611 for a quote.
Small fence runs can sometimes be completed in a single visit, though full-lot replacements and deeper post-setting on bay-mud soils typically need more than one. Schedules depend on the job, and we’re happy to give you a realistic timeline up front. Call (833) 700-4611 to check availability.
Ready for a Straight Number on Your Richmond Fence?
Get a free estimate and design consult from Groundwork Construction Co. of Richmond – upfront pricing, no surprises, and a live person on the phone whenever you call. We’ll look at your lot’s exposure, soil, and post spec before we quote, so the per-foot number you get is one you can actually build on. Call (833) 700-4611 today.
Written by the team at Groundwork Construction Co. of Richmond, serving Richmond, CA.
What Our Customers Say
"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."
- Laura Bennett"He pulled the permits himself, scheduled every sub and ran the inspections. I made one decision a week and otherwise stayed out of it, which is exactly what I was paying for."
- Robert Sullivan"Change orders were written down and priced before the work happened, every single time. No surprise at the end."
- Keisha Robinson












