







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterQuartz & Granite Countertops in Richmond, CA
Quartz and granite countertop installation in Richmond typically runs $3,200 to $9,500 for a full kitchen, including templating, fabrication, and tear-out of the old surface. Most jobs are measured within a week of your call and installed 10 to 14 days later, once the slab is cut and finished. We handle the whole thing: the site visit, the slab selection, the template, the install, and the caulk line at the end, so you’re not chasing three different vendors when something goes sideways.
Groundwork Construction Co. of Richmond does countertop work as part of a kitchen remodeling project or as a stand-alone replacement. If you’re only swapping the surface and keeping your cabinets, that’s fine. If you’re mid-remodel and the cabinets are coming out anyway, we sequence the countertop so it lands right after the cabinet install and before the backsplash, which is the order that keeps your schedule sane. Call (833) 700-4611 and a live person picks up, any hour.
What separates a good countertop job from a frustrating one is rarely the stone. It’s the template. A counter that’s off by an eighth of an inch at the sink cutout means a faucet that won’t seat, or a dishwasher that won’t slide back under. Our technicians bring up to 12 years of fabrication and install experience to that measurement, and every project is covered by our 730-Day Done Right Promise. If a seam lifts or a cutout is wrong, we make it right. That’s not a slogan; it’s the document you get at signing.
Key Takeaways
- Most Richmond quartz and granite jobs land between $3,200 and $9,500 depending on square footage, edge profile, and slab grade.
- We template after cabinets are set, not before, which prevents 90% of the fit problems we get called out to fix.
- Richmond’s older housing stock (much of it pre-1960) means we check for out-of-level cabinet runs before we ever measure.
- Live person answers the phone 24/7 at (833) 700-4611. No voicemail, no Monday-morning callback.
- Every install carries the 730-Day Done Right Promise and upfront pricing: the number you see is the number you pay.

When You Need Quartz & Granite Countertops
Countertops aren’t a repair item, so the triggers are usually cosmetic, functional, or tied to a bigger project. Here are the situations we see most often in Richmond.
- The laminate is peeling at the sink edge. In homes around the Richmond Annex and Ells Park, we regularly see 1980s and 1990s laminate countertops where water has crept under the backsplash lip and swelled the particleboard core. Once that happens, no amount of caulk fixes it. The surface has to come off.
- You’re replacing cabinets and the old counter won’t survive the demo. If the cabinets are coming out, the countertop is almost always sacrificial. Planning the new surface at the same time saves you a second tear-out and a second dumpster.
- You want a surface that handles Richmond’s humidity swings. Point Richmond and the Marina Bay condos sit close enough to the bay that interior humidity moves more than people expect. Quartz is non-porous and doesn’t care. Granite is porous and needs sealing every year or two. Both work; the maintenance differs, and we’ll tell you which fits your habits.
- The existing counter has a bad seam or a chip at the edge. A failed seam near the cooktop or a chipped bullnose at the corner is usually a sign the original install was rushed. We see this most in flipped homes from the 2010s.
- You’re adding an island or a peninsula. A new island means a new slab, and the overhang math matters. Standard overhang for seating is 12 inches, which needs support brackets at anything past 10. We build that in.
- You’re selling and the kitchen is the weak room. A dated counter is the cheapest way to move the needle on a kitchen that’s otherwise fine. We can typically turn a standard Richmond kitchen around inside three weeks, start to finish.
Our Quartz & Granite Countertops Process
Countertop work looks simple from the outside. It’s five distinct stages, and each one has a way of going wrong if it’s rushed. Here’s how we run it.
- Site visit and cabinet check. We measure the existing layout and, more importantly, check whether the cabinet run is level and square. In Richmond’s older homes, especially the bungalows and war-time housing near the Annex, a cabinet run can be a half inch out of level across eight feet. If we template on a bad base, the counter comes out wrong no matter how good the slab is. We flag it now, not after fabrication.
- Slab selection and material consult. You pick the material. We walk you through quartz versus granite for your actual use: quartz for low maintenance and consistent pattern, granite for heat tolerance and natural variation. Caesarstone and Cambria are two brands we work with regularly. We bring samples to your kitchen so you’re seeing the color under your own lighting, not showroom fluorescents.
- Digital templating. Once cabinets are set and any new sink or cooktop is on site, we template. Templating before the sink arrives is the single most common reason a cutout is wrong. We don’t do it. The template captures every cutout, the backsplash profile, and the edge detail.
- Fabrication. The slab is cut, polished, and edge-finished off site. Typical turnaround is 7 to 10 business days for standard materials. We confirm the install date when the template is done so you’re not guessing.
- Installation and finish. We set the counter, seam it, mount the sink, and caulk the backsplash line. Seams are placed away from the sink and cooktop where possible. The crew is background-checked and arrives in uniform.
- Walkthrough. We go over the seams, the edges, and the care instructions with you, and you get the 730-Day Done Right Promise in writing. If something’s off in the first two years, we come back.
If your project touches the broader kitchen, our Kitchen Remodeling in Richmond page covers cabinetry, layout, and the full build sequence. Countertops are one piece of that puzzle, and it’s easier to plan the whole thing together than to retrofit a slab into a kitchen that’s already finished.

Quartz & Granite Countertops Pricing in Richmond
Countertop pricing in Richmond depends on three things: square footage, material, and edge profile. Here are the ranges we see for a standard kitchen of roughly 30 to 50 square feet of counter surface.
| Line Item | Typical Range |
|---|---|
| Quartz, entry-level (group A/B colors) | $55 – $75 per sq ft installed |
| Quartz, premium (group D/E, dramatic veining) | $85 – $120 per sq ft installed |
| Granite, standard grades | $50 – $80 per sq ft installed |
| Granite, exotic or book-matched slabs | $95 – $150 per sq ft installed |
| Tear-out and disposal of old counter | $250 – $600 |
| Sink cutout and undermount install | $200 – $450 |
| Edge profile upgrade (bullnose, ogee, waterfall) | $15 – $60 per linear ft |
| Backsplash, 4-inch standard | $200 – $500 |
| Full-height backsplash (slab match) | $900 – $2,200 |
That puts a typical Richmond quartz kitchen at $3,200 to $7,500 and a granite kitchen at $2,900 to $8,000, with premium slabs pushing higher. A small galley kitchen in a Marina Bay condo can come in under $3,000. A large kitchen with a waterfall island near the Richmond Country Club side can run $12,000 or more.
What moves the number:
- Slab size and yield. Standard slabs are about 55 to 60 square feet. If your layout needs two slabs because of an island or a long L-run, that’s a material cost jump, not a labor one.
- Cutout count. Sink, cooktop, faucet holes, soap dispenser, filtered water. Each one is a fabrication step.
- Edge complexity. A simple eased edge is standard. A waterfall or double ogee is hand work.
- Removal conditions. Tile counters with a mortar bed come out harder than laminate and cost more to haul.
- Access. A third-floor walk-up or a tight Richmond hillside driveway affects how the slab gets in. Slabs are heavy and fragile, and access matters.
We give you upfront pricing: the number you see is the number you pay. No mid-job change orders for things that should’ve been caught at the template. Projects over $10,000 get $1,000 off, and 0% financing for 18 months is available if you’d rather spread it out. The design consult and estimate are free.
FAQs – Quartz & Granite Countertops
How much do quartz countertops cost in Richmond, CA?
Quartz countertops in Richmond typically cost $55 to $120 per square foot installed, which puts most full kitchens between $3,200 and $9,500 depending on slab grade.
Entry-level colors land near the bottom of that range; premium veined slabs land near the top. Call (833) 700-4611 for an exact quote. Estimates are free.
Is quartz or granite better for a Richmond kitchen?
Quartz is better if you want low maintenance and a consistent pattern; granite is better if you want heat tolerance and one-of-a-kind natural stone. Quartz is non-porous and never needs sealing. Granite is porous and needs resealing every one to two years, but it handles a hot pan set down on it without discoloring. For Richmond homes with a bay-adjacent humidity swing, quartz is the more forgiving choice because it doesn’t absorb moisture. Call us and we’ll walk you through the tradeoffs for your specific kitchen.
Can you install countertops the same week?
No. Quartz and granite need fabrication time, so the fastest realistic timeline is 10 to 14 days from template to install. Same-week isn’t possible because the slab has to be cut, polished, and edge-finished off site. What we can do is template within a week of your call and lock your install date at that point. Call (833) 700-4611 to get on the template schedule.
Do you remove the old countertops?
Yes. Tear-out and disposal of your existing laminate, tile, or stone counter is included in our standard quote, typically $250 to $600 depending on material and access. We haul it away, so you’re not renting a dumpster or making a dump run. If the old counter is in good shape and you want to keep it for a garage or laundry room, we’ll set it aside. Call for a free estimate that includes tear-out.
What’s the difference between a 2cm and 3cm slab?
A 3cm slab (about 1.25 inches) is the standard for kitchens and can be installed without a plywood build-up; a 2cm slab (about 0.75 inches) needs a plywood substrate underneath to reach full thickness. Most Richmond homeowners choose 3cm for simplicity and fewer failure points. A 2cm slab saves material cost but adds a build-up step, and the price difference usually nets out close to even. We’ll tell you which makes sense for your layout.
Will the seams show?
Seams are visible on close inspection but can be made nearly invisible with color-matched epoxy and careful placement. We place seams away from the sink and cooktop and, where possible, off the main sightline from the kitchen entry. On quartz, seams are more visible than on granite because the pattern is consistent and any interruption shows. On granite, the natural veining hides seams better. Call us to talk through seam placement for your specific layout.
Countertops are one of those projects where the bid and the result can look very different. We keep them the same by measuring carefully, pricing upfront, and standing behind the work for two years with the 730-Day Done Right Promise. If you’re in Richmond, whether it’s the Annex, Point Richmond, Marina Bay, or the neighborhoods up toward Wildcat Canyon, and you’re weighing quartz against granite, the fastest way to a real number is a phone call.
Groundwork Construction Co. of Richmond
Call (833) 700-4611 for a free project estimate and design consult. A live person answers 24/7. Financing available at 0% for 18 months, and projects over $10,000 get $1,000 off. From foundation to finish line: our technicians bring up to 12 years of experience, arrive in uniform, and back every counter with the 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co. of Richmond, serving Richmond.


