







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterCustom & Geometric Windows in Richmond, CA
Custom and geometric windows are made to fit an opening that stock sizes can’t fill: arches, trapezoids, half-rounds, circles, custom-cut rectangles for a picture wall, and any shape a designer draws that doesn’t match a factory catalog. If you’re building, adding on, or replacing original windows in one of Richmond’s older homes, the shape is often the whole reason the project needs a custom order. Groundwork Construction Co. of Richmond works with homeowners on these projects from first measurement through final trim, and we handle the order, the install, and the finish carpentry under one contract. Call us at (833) 700-4611 and a live person picks up, day or night.
Most of what we install on these jobs comes from our window brand partners, including ES Windows, ECO Window Systems, and Therma-Tru. Those aren’t the only names we’ll quote, but they cover a useful range: architectural shapes with tight tolerances, energy-rated frames for the East Bay climate, and entry systems that need to line up with a custom transom above. You get one contractor, one crew, and one written guarantee. Our technicians have up to 12 years of experience on window work, and every job is covered by our 730-Day Done Right Promise, which means if something goes wrong with the install, we come back and make it right. It’s one of the longest workmanship guarantees in residential construction.
This page sits under our Windows & Doors service, so if you’re weighing a whole-house replacement instead of a handful of shaped windows, start there. If the shapes are the point, keep reading, because that’s what we’re covering here.

When You Need Custom & Geometric Windows
Stock windows cover a lot of openings. A surprising number of Richmond homes still need shapes that no catalog carries. Here’s what we see most often:
- An arch or half-round above a front door or picture window. Common in the 1920s to 1940s bungalows and Spanish Revival homes around Point Richmond and the older streets near downtown. The arch was part of the original design, and a squared-off replacement looks wrong from the curb the moment it goes in.
- Trapezoid or angled windows under a gable or stair. If you’re finishing an attic, opening up a stairwell, or adding a second floor, the wall isn’t square to anything. A shaped window is often the only way to get light into that space without cutting a hole through a structural member.
- An addition or ADU that doesn’t match stock dimensions. When you’re building a new room from the studs out, the framing rarely lands on a stock rough opening. We order to the actual dimensions instead of padding the wall with drywall returns to force a standard window in.
- Original windows that are failing but can’t be swapped for stock units. An arched picture window with fogged glass, a rotted sill, or a broken sash in a shape that isn’t made anymore. Replacing the unit means ordering to the opening; there’s no off-the-shelf fallback.
- A view you want to open up. Corralled views toward the bay or toward the hills often get blocked by a grid of small stock windows. A wide custom picture unit or a shape that follows a roofline does more with the wall than a row of rectangles.
- New construction with an architect’s drawing in hand. Some of the newer homes going up around Richmond arrive with shaped windows already on the plan. We take the drawings, confirm the rough openings, and coordinate the order with the framing schedule so nothing sits exposed.
Richmond’s coastal weather matters here, more than most homeowners expect. The marine layer and the wind off the bay push moisture against west-facing walls for months of the year. A shaped window set in a wall that gets that kind of exposure needs a careful flashing and sealant detail, or you’ll be chasing a water stain inside the room within a couple of seasons. That’s one of the reasons we measure and install this ourselves instead of handing the shaped unit off to a different crew.
Our Custom & Geometric Windows Process
Custom windows don’t fail because of the glass. They fail because the opening was measured wrong, the shape was ordered against the wrong template, or the trim carpenter and the window installer never talked to each other. Here’s how we run the job so none of that happens.
- On-site measurement and shape confirmation. We come out, measure the rough opening, and take a template or tracing of the actual shape. For arch tops, we measure the radius directly off the opening, not off the old window. A full set of dimensions goes into the order, not a guess from a photo.
- Brand and material selection. We walk you through the options in our window partner line, including ES Windows and ECO Window Systems for shaped units, and contrast the tradeoffs: the frame material, the way the unit handles the coastal air, and the glass package for your exposure. We bring samples, and we talk about what each choice means in dollars before you commit.
- Upfront pricing in writing. You get the number before work starts. No-hassle upfront pricing means the number you see is the number you pay, and anything that comes up as an unavoidable extra is put in writing and agreed before we touch it. If you’re bundling this with a larger remodel, our 0% financing for 18 months and $1,000 off projects over $10,000 apply to the qualifying scope.
- Order, lead time, and scheduling. Shaped windows take longer than stock. We place the order, give you the expected lead time, and coordinate the install so the wall isn’t open longer than it has to be. If the window is for a room you’re actively building, we time the order against the framing so it arrives when the opening is ready.
- Install with proper waterproofing and trim. We remove the old unit if there is one, prep the opening, flash the sill and sides, set the window plumb and square, air-seal the perimeter, and finish the trim. The interior and exterior trim is part of the job; a shaped window with sloppy trim looks like a punched hole with glass in it. Most of these installations are completed in a single visit once the unit is on site.
- Walkthrough and the 730-Day Done Right Promise. We test the operation (if the unit opens), check the sealant lines, and walk you through what to expect over the first season. If something doesn’t look right in the months after, we come back. That’s the promise, in writing.
Our technicians are background-checked and arrive in uniform, so you know who’s working inside your home. We’re licensed and insured, and a live person answers the phone 24/7, which matters when you’ve got a window sitting in a box on your porch and the wall open behind it.

Custom & Geometric Windows Pricing in Richmond
Custom and geometric windows in Richmond typically run $950 to $3,200 per unit installed for a standard shaped unit in a wood or vinyl frame, and $2,400 to $6,500 or more for a large arched picture unit, a custom architectural glass assembly, or a one-off shape that requires a fully bespoke fabrication. These are honest ranges from East Bay jobs, not a bait-and-switch. The final number depends on how many windows, the shape and size, and how much exterior access the installation needs.
| Line item | Typical range (installed) |
|---|---|
| Standard shaped window (half-round, trapezoid, small arch) | $950 – $2,200 |
| Large arched picture window or custom rectangular unit | $2,400 – $6,500+ |
| Custom shape needing bespoke fabrication | Quote after measure |
| Trim, flashing, and finish carpentry detail | Included in the install quote |
| Old window removal and disposal | Included where applicable |
What moves the number: the shape (a rectangle in a custom size is cheaper than a true arch or circle), the frame material, the glass package, how high the window sits (a second-floor installation needs staging), and whether there’s existing rot or framing repair behind the old unit. Scattered 1970s and 1980s homes along the flats often have more framing damage than the owner expected, because a failed flashing detail laid the problem in over decades.
If you’re replacing one failing shaped window, expect the lower end. If you’re doing a picture wall or several arches at once, the per-window cost drops because we’re already on site and the mobilization is shared. Our Free Project Estimate & Design Consult is exactly that: free, on site, with a written number. And if the project qualifies, $1,000 off projects over $10,000 and 0% financing for 18 months are standing offers, not a limited-time gimmick.
FAQs – Custom & Geometric Windows
How much do custom and geometric windows cost in Richmond?
A standard shaped window in Richmond typically runs $950 to $2,200 installed, and a large arched or fully bespoke unit runs $2,400 to $6,500 or more. The shape, frame material, glass package, and installation height drive the price. Call (833) 700-4611 for an exact quote, and estimates are free.
How long do custom windows take to arrive and install?
Plan on longer than stock windows. Shaped and custom-fabricated units commonly take several weeks from order to delivery, and some bespoke assemblies run longer. Installation itself is usually a single visit once the unit is on site. We give you the lead time up front and schedule against your framing or your open wall so you’re not sitting with a hole. Call us to talk through timing for your project.
Can you replace an arched window without matching the exact original shape?
Sometimes, and we’ll tell you honestly when that’s the case. If the arch follows a structural detail and a stock rectangular unit would look wrong from the street or interrupt the roofline, the shape has to be matched. If the arch was decorative trim over a standard opening, a cheaper solution may exist. We look at the actual opening before recommending anything. Call (833) 700-4611 and we’ll set a time to look.
Do custom windows work with Richmond’s coastal climate?
Yes, if the unit is specified for the exposure and installed with correct flashing and air-sealing. West-facing walls catch the marine air and wind, so we choose the frame material and glass package with that in mind and pay close attention to the sill detail. The 730-Day Done Right Promise covers the workmanship, so if water gets in where it shouldn’t in the first two years, we come back and fix it.
Do you handle framing repairs if the wall behind the old window is rotted?
We do. Rot around an old shaped window is common in Richmond’s older homes, and it’s usually caused by decades of a failed flashing detail rather than the window itself. Any framing or sheathing repair is scoped and priced before we install the new unit, so there are no surprises mid-job. Call us to get a real look at the wall before you plan the order.
Why Richmond Homeowners Call Groundwork for Shaped Windows
Custom and geometric windows are the kind of work that looks simple from the outside and isn’t. The order, the measurements, the flashing detail, and the trim have to be coordinated by the same people, or the shape you paid for ends up sitting in a frame that leaks. At Groundwork Construction Co. of Richmond, we handle all of it under one contract, backed by our 730-Day Done Right Promise and a written upfront price. If something isn’t right, we make it right, and that’s in writing. Our technicians have up to 12 years of experience, they’re background-checked, and they show up in uniform. Calls are answered by a live person 24/7, so you’re never stuck in a voicemail loop. Browse our Richmond service area to see the neighborhoods and services we cover.
Written by the team at Groundwork Construction Co. of Richmond, serving Richmond.
Ready to price a shaped window or a whole wall of them? Call (833) 700-4611 for a free estimate and design consult. We’ll measure the opening, talk through the options, and give you a written number you can plan around. If it’s the right fit, ask about the $1,000 off projects over $10,000 and 0% financing for 18 months.


