







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in Richmond, CA: What to Expect
Door installation in Richmond typically runs $650 to $2,800 per opening for an exterior door, with most standard front, side, and back door swaps landing between $900 and $1,800 installed. A single exterior door is usually a one-day job; anything that requires framing repair, a new header, or a change in size stretches to two or three days. Call (833) 700-4611 and we’ll give you a written line-item price before anyone touches the frame.

How our Richmond door installation process actually runs

Every door job follows the same five stages. Here’s what happens, when, and what you’ll be deciding.
Stage 1: Site visit and measurement (day 1, about an hour)
We measure the rough opening, check the frame for plumb and square, and look at the wall around it. On Richmond flatlands bungalows, we’re checking for rot behind the trim and for the settled framing that comes with a century of bay-area ground movement. You’ll decide door style, material, and hardware at this visit. If the existing opening is out of square by more than a half inch, we tell you then, not after demo.
Stage 2: Ordering and lead time (two to six weeks, depending on spec)
Stock fiberglass or steel doors come in about a week. A custom-size wood door or a factory-finished Andersen or Pella unit runs four to six weeks. We give you the firm delivery window in writing so you can plan around it. This is also where the permit application goes in if the job needs one.
Stage 3: Demo and prep (day of install, two to four hours)
Old door and trim come out, and we inspect what’s behind them. This is the moment a simple swap can turn into a repair job: soft framing, a rotted sill, a threshold that’s been letting water in for years. We photograph everything before we close it back up.
Stage 4: Installation and sealing (three to five hours)
The new door goes in plumb, shimmed, and anchored. We flash the sill, seal the perimeter, insulate the gaps, and set the hardware. Exterior caulking and paint touch-up happen the same day.
Stage 5: Inspection and walkthrough (same day or next)
Where a permit was pulled, the city inspector signs off before we call it done, sometimes the same day. Then we walk the door with you: latch, swing, weatherstrip, and lock. You don’t sign off until it all works.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll weigh before signing off
Door spec decisions drive both cost and how long the door lasts in Richmond’s fog belt. Here’s the honest comparison:
- Fiberglass: $900 – $1,800 installed. Won’t rot or swell, handles the damp air on the bay side of town well, and takes paint or stain. Best value for most Richmond exteriors.
- Steel: $800 – $1,600 installed. Strong and secure, common for side and service doors. Dents show, and any scratch that reaches bare metal rusts fast in wet winters.
- Solid wood: $1,400 – $2,800 installed. Beautiful on a restored craftsman in the Iron Triangle, but it needs repainting or restaining every few years to survive south- and west-facing moisture.
- Impact-rated and wind-rated units: $1,600 – $2,800 installed. Reinforced frames, multi-point locking, rated glass. Worth the premium where wind load and security matter, and often required on new construction or major alterations.
- Hardware and thresholds: $80 – $400. Adjustable thresholds and quality weatherstripping are the difference between a dry entry and a wet one; don’t cheap out here.
What Door Installation costs in Richmond, CA
Plan on $650 to $2,800 per door installed, and $900 to $1,800 for the typical exterior swap. Interior doors run lower, roughly $400 to $1,100 each. What pushes a job toward the high end:

- Opening condition: rotted framing, a bad sill, or settled headers add $300 – $900 in carpentry.
- Size changes: widening or shortening the opening means new framing and header work, typically $500 – $1,500 extra.
- Material grade: a custom wood or factory-finished premium unit can double the door cost alone.
- Permit scope: a straight swap usually needs no permit; structural changes or new openings in Richmond trigger plan check and inspection fees.
- Access and finish: a second-story or tight-side-yard install, or a full trim-and-paint package, adds time and money.
A written estimate lists door unit, labor, hardware, flashing and sealing, disposal, and permit fees as separate lines. It won’t include unexpected rot repair until we open the wall, but we price that repair at a fixed rate we agree on before proceeding. Upfront pricing, no surprises.
See the difference
Before
After
Before
After
Before
AfterWhat Richmond homes specifically do to a door install
Richmond’s housing stock shapes this work more than most homeowners expect. In the South Richmond and Iron Triangle bungalows, we’re often working around 1910s – 1940s shipyard-era framing that’s settled and out of square, and doors that were hung in openings never meant for a modern prehung unit. Out in Parkview and Verde, the 1950s – 60s stucco tract homes have their own rhythm: thinner wall assemblies and original openings that need careful flashing to keep winter rain out. The big local variable is down at the waterfront and the former industrial land near Point Molate, where bay-mud fill and old infrastructure mean site conditions that El Cerrito or San Pablo crews never deal with; a door tied into a wall that’s already moving needs reinforcement, not just a new slab. We cover Richmond and the surrounding East Bay with the same process, and every install is covered by the 730-Day Done Right Promise. If you’re pairing this with a larger remodel, it’s often part of a full Windows & Doors in Richmond project, and homeowners frequently pair a new entry with Cabinets & Countertops in Richmond or a Garage Conversion ADU in Richmond that needs matching doors.
Serving Richmond, CA – Our Local Coverage Area
We serve Richmond and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: Door Installation in Richmond

A single exterior door is usually done in one day, often three to five hours on site. Custom orders add four to six weeks of lead time before that day. Call (833) 700-4611 for a firm schedule.
A like-for-like replacement generally needs no permit. A new opening, a size change, or structural framing work does, and impact or wind-rated units on structural walls may require plan check. We pull the permit and handle inspection when the scope calls for it.
Yes, most swaps don’t touch anything behind the wall. If the opening is out of square or the framing is rotted, we’ll explain the repair and its cost before starting, not after.
Most exterior doors run $650 to $2,800 installed, with standard fiberglass or steel units landing at $900 – $1,800. Call (833) 700-4611 for an exact quote; estimates are free.
Every install is backed by our 730-Day Done Right Promise: if it’s not done right, we make it right. Manufacturer warranties on the door unit add their own coverage on top.
Get a free door installation estimate in Richmond
Call (833) 700-4611 and we’ll book a free on-site estimate for your door project. A technician measures the opening, walks you through material and hardware options, and leaves you with a written line-item quote. Our technicians have up to 12 years of experience, they’re background-checked and arrive in uniform, and our Windows & Doors team coordinates the whole job from first measurement to final inspection. Live person answers around the clock.
Written by the team at Groundwork Construction Co.












