







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in Berkeley, CA: What It Involves and What It Costs
Door Installation in Berkeley, CA typically runs $650 to $2,800 per door, with most single exterior door projects landing between $1,100 and $1,900. A standard interior door swap takes a few hours; a full exterior replacement with new framing, flashing, and trim runs one to two days. Call (833) 700-4611 for a free on-site estimate at your Berkeley property. We’ll measure the opening and give you a written, line-item price before anything gets ordered.

The short version: Berkeley doors are rarely a straight swap. Old openings in this city’s housing stock have settled, the framing may be out of square, and we plan for that before we quote.
Key Takeaways
- Most Berkeley door installations cost $650 to $2,800 per door, all-in.
- Interior doors: same-day. Exterior doors with new framing: one to two days.
- Exterior replacements and structural changes need a City of Berkeley permit.
- Berkeley’s older homes often need header, flashing, and threshold work that a simple swap hides.
- Upfront pricing, in writing, with a 730-Day Done Right Promise on the workmanship.
How We Handle Door Installation in Berkeley, Start to Finish

Every door we install follows the same five-stage sequence. Here’s what actually happens, and what you’ll be deciding at each point.
Stage 1: The on-site measure and consultation (about 60 to 90 minutes)
We walk every opening you want changed and measure rough openings, check the walls for plumb and square, and photograph the existing framing once we’ve got trim off. You decide the door style, material, swing direction, and hardware at this meeting or shortly after. If you’re replacing several doors across a full Windows & Doors in Berkeley project, this is where we phase the work so no room sits open overnight.
Stage 2: Permit and product order (3 to 10 days)
Exterior door replacements and anything that changes the rough opening need a permit through the City of Berkeley. We pull it, so you’re not standing in line at the permit desk. Special-order doors, particularly solid wood and custom-width slabs, take the longest to arrive. Once the permit is issued and materials are on site, we schedule the install.
Stage 3: Removal and prep (2 to 4 hours)
On install day we protect the floor and surrounding walls, then remove the old door and trim. This is where we find the real condition of the opening. Rot in the sill or jamb, outdated flashing, an out-of-square frame from a settling foundation, or old knob-and-tube wiring run near the door frame (common in Berkeley’s early-1900s homes) all surface here. If the opening needs a new header or structural repair, we show you what we found and quote the addition in writing before proceeding.
Stage 4: Install, shim, seal, and flash (4 to 8 hours)
We set the new door plumb, level, and square, shim the frame, and anchor it. Exterior doors get new flashing at the head and sill, a proper threshold pan, and a continuous bead of exterior-grade sealant around the frame. Interior doors get casing on both sides and the gap between the rough opening and the jamb filled with insulation to stop drafts and sound transfer.
Stage 5: Hardware, trim, and final walkthrough (1 to 2 hours)
Deadbolts, handles, hinges, and any weatherstripping go on at this stage. We test the door through a dozen open-and-close cycles, check that it latches cleanly, and walk you through what we did before we leave. You get the permit inspection scheduled if one is required, and the final punch list is ours to close.
Most installations happen in a single visit. Exterior doors that need new framing or a permit inspection will run into a second day. We tell you which before the job starts, not after.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between Before We Order
Door selection drives both the look and the budget. Here’s what actually matters, with the honest trade-off of each choice.
- Hollow-core vs. solid-core interior doors: Hollow-core runs $150 to $400 installed and is fine for closets and low-traffic rooms. Solid-core costs $350 to $800 installed and cuts sound transfer noticeably, which matters in a Berkeley bungalow where rooms share walls.
- Fiberglass vs. wood exterior doors: Fiberglass runs $900 to $2,200 installed, doesn’t warp in Berkeley’s damp winter air, and holds paint for years. Solid wood looks better up close but needs regular refinishing and can swell in the rainy season. Most of our Berkeley clients choose fiberglass for the front and wood for a sheltered side entry.
- Steel exterior doors: The most economical option at $700 to $1,600 installed. Dents easily, and in Berkeley’s fog belt the paint needs care to prevent rust at the bottom edge.
- Standard vs. custom-width: Off-the-shelf doors cost less and arrive fast. Custom-width is $400 to $1,200 more and adds 2 to 4 weeks to the schedule. Worth it in older Berkeley homes where the opening was never a standard size.
- Pre-hung vs. slab: Pre-hung doors come already in their frame, install faster, and are the right call when the old frame is damaged. Slabs fit into an existing frame and cost less, but require a perfectly square opening to work.
Brands like Dvele and Plant Prefab make pre-engineered impact-rated door and window packages that pair well with new construction and ADU work; we’ll point you to them if you’re adding on rather than replacing in an existing wall. Hardware is your call entirely and doesn’t affect the install price unless you’re adding an electronic lock that needs wiring.

What Door Installation Costs in Berkeley, CA

Expect $650 to $2,800 per door installed, with most exterior doors falling in the $1,100 to $1,900 range and interior doors at $350 to $800. These ranges come from the same pricing we use on every job in Berkeley.
| Job | Typical Price Range |
|---|---|
| Interior door replacement (hollow-core) | $350 – $600 |
| Interior door replacement (solid-core) | $450 – $800 |
| Exterior steel door installed | $700 – $1,600 |
| Exterior fiberglass door installed | $900 – $2,200 |
| Exterior solid wood door installed | $1,200 – $2,800 |
| Header or framing repair (if found) | $400 – $1,500 |
| Flashing and threshold replacement | $250 – $700 |
Five things push a Berkeley door installation from the low end of that range to the high end:
- Opening condition: A square, sound opening is the cheapest install. Rot, settling, or a frame that was never square adds repair time.
- Structural work: A new header over a wider opening, or addressing a soft-story concern, changes the scope and needs a permit.
- Material grade: Fiberglass and steel sit at the bottom; solid wood and custom-milled slabs sit at the top.
- Permit scope: Interior replacements rarely need one. Exterior replacements and any structural change do.
- Access: A tight interior hallway or a narrow Berkeley Hills stairwell adds handling time on heavy doors.
Your written estimate lists the door, hardware, framing repair allowance, permit fees if any, and labor, line by line. The number you see is the number you pay. We don’t add charges after work starts unless you approve a change in writing first. No-hassle upfront pricing, and the 730-Day Done Right Promise backs the workmanship for two full years.
See the difference
Before
After
Before
After
Before
AfterWhat Berkeley Homes Do to Door Installation
Berkeley’s housing stock is the real story here. The Elmwood and north side are dominated by early-1900s Craftsman bungalows and brown-shingle homes, and the flatlands are full of post-war stucco boxes and 1920s Mediterranean apartments. Doors and door frames in these homes have been settling for a century. We regularly see thresholds out of level by half an inch or more, jambs that were shimmed with whatever was on hand, and original knob-and-tube wiring tucked near the door frame that triggers a code upgrade when we open the wall. In the hills, where the 1991 Oakland-Berkeley Hills Firestorm legacy still shapes local building rules, exterior doors often need fire-rated assemblies and non-combustible surrounds that a flatlands contractor may not plan for.
Our team handles door installation across Berkeley, including 94720, 94705, 94708, and 94710. We pull the permit through the City of Berkeley, get the inspection completed, and fine-tune the latch on the final walkthrough. Most of our Berkeley jobs are scheduled within a few weeks of estimate approval, and most are finished in a single day.
Serving Berkeley, CA – Our Local Coverage Area
We serve Berkeley and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Door Installation in Berkeley

Interior door replacements take a few hours; exterior doors typically take one to two days. A single interior door swap is usually done in under two hours. An exterior door with framing repair, new flashing, and a permit inspection runs into a second day. Call (833) 700-4611 for a free estimate and we’ll give you a realistic schedule before you commit.
Interior door replacements rarely need a permit. Exterior door replacements and any change to the rough opening or framing do require a City of Berkeley permit. We pull the permit for you and schedule the inspection, so you’re not dealing with the permit counter yourself. Call (833) 700-4611 to find out whether your project needs one.
In most cases, yes. If the existing opening is the right size for the new door, we install a pre-hung door into the existing frame without touching plumbing or structure. If the opening needs to be widened or a header replaced, that’s structural work that requires a permit and adds to the schedule and cost. We tell you which category your project falls into at the on-site estimate.
Door installation in Berkeley runs $650 to $2,800 per door, with most exterior doors costing $1,100 to $1,900 installed. Interior doors are $350 to $800. The final price depends on door material, opening condition, permit requirements, and whether framing repair is needed. Call (833) 700-4611 for an exact quote; estimates are free.
Every door installation we do is covered by our 730-Day Done Right Promise. That means if anything isn’t right with the installation within two years, we make it right. The door manufacturer’s warranty covers the product itself. If it’s not done right, we make it right.
If your Berkeley project is bigger than a door swap, we’re a full-scope construction partner. Homeowners often pair door installation with Cabinets & Countertops in Berkeley during a kitchen refresh, or with a Garage Conversion ADU in Berkeley when they’re adding a new living space and need doors throughout. Our Windows & Doors service covers every opening in the house.
Get a Free Door Installation Estimate in Berkeley
Call (833) 700-4611 to schedule your free on-site estimate for door installation in Berkeley. We’ll measure your openings, walk you through the material options, and give you a written line-item price the same day. A live person answers around the clock, no voicemail. If you’ve got a door that sticks, a front entry that’s seen better days, or a new opening to fill, we’ll tell you exactly what it takes and what it costs before we start.
Written by the team at Groundwork Construction Co.












