A Groundwork company - serving Richmond, CA
A living room with a wall of new windows and a sliding glass door
Door Installation · Orinda, CA

Door Installation in Orinda - Free Measure, Exact Written Quote

Free in-home measure and an exact written price before anything is ordered. Energy-rated units, professional installation by a licensed local installer, and a workmanship warranty on the install.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Richmond
A new bay window with a cushioned seat
A new casement window over a kitchen sink
A walk-in shower with large-format tile and a built-in niche
A remodeled family room with new windows and a window seat
A standing-seam metal roof over a covered porch
A new wood side gate with black hardware
A new concrete driveway with a paver border
A stone counter, tile backsplash and open shelf after a kitchen remodel
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Door Installation in Orinda, CA: What the Job Actually Involves

Door installation in Orinda, CA typically runs $650 – $2,400 per opening for a standard exterior or interior door, and $2,800 – $6,500 when you’re hanging a heavy custom slab, a wide slider, or a door that has to be reframed into hillside-era construction. Most single-door jobs wrap in one day; a full exterior swap with trim, flashing, and paint lands at two to three. Call (833) 700-4611 for a free on-site estimate and a written, line-item number before any work starts.

Two professional workers installing a new exterior door at a home. in Orinda, CA

Call (833) 700-4611

The Five Stages We Work Through on Every Orinda Door Install

New double-hung windows in a dining room

Nobody wants a door hung twice. Here’s the sequence we run, and where you make the calls.

Stage 1: Measure, swing, and sight lines (day 1, about an hour)

We measure the rough opening in three places, check the frame for plumb and square, and confirm the swing direction, hinge side, and whether the door needs to sit flush with interior drywall or proud of it. This is where you pick handedness and decide if the existing casing stays or comes off. On Orinda hillside homes, this is also where we note whether the wall has shifted since the 1960s, because a square door in an out-of-square opening means planing, shimming, or a custom frame.

Stage 2: Demo and prep the opening (2 – 4 hours)

We pull the old door, slab, and casing, then inspect the rough framing and the header. Rotted sill plates and water-stained subfloor show up more than you’d expect on north-facing Orinda entries where the fog sits. Any soft wood gets cut out and replaced before a new door goes back in. You don’t have to decide anything here unless we find framing rot, which we photograph and price before touching.

Stage 3: Set and shim the unit (2 – 3 hours)

The new door goes in plumb and level, shimmed at the hinges and the lock side so the slab neither drags nor springs open. We check the reveal gap is even all the way around and the door closes with a two-finger push. For exterior doors we dry-fit before fastening, because once the flashing is set you want the reveal right the first time.

Stage 4: Weatherproof and seal (2 – 3 hours)

Exterior doors get a door pan or sill pan, flashing tape at the head and jambs, and a bead of sealant under the threshold and behind the brick mold. This is the stage that decides whether the door leaks in February. Interior doors skip the weatherproofing and move straight to trim.

Stage 5: Hardware, trim, and final adjust (2 – 3 hours)

We set the lockset, deadbolt, and any closer or automatic operator, hang the casing, fill nail holes, and adjust the strike plate so the latch clicks without a shove. You walk it with us, open it half a dozen times, and sign off. On exterior doors, we prime and paint the raw edges the same visit, because a painted edge on a wood or fiberglass door is what keeps moisture out of the slab.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

The Options You’ll Choose Between

Most of the cost swing in a door comes from three decisions: the slab material, whether the frame is replaced or reused, and how much glass and hardware you add.

  • Fiberglass exterior doors – the best match for Orinda’s hot summers and fire-hardening requirements. Holds a stain or paint for a decade, resists dents, and can carry a certified fire rating. Pricier than steel by $150 – $400 per door.
  • Steel exterior doors – the least expensive way to get a strong, paintable entry. It dents at the kick plate and rusts at any cut edge, so the finish matters more than the slab.
  • Solid-core wood interior doors – noticeably quieter, holds a hinge better than hollow-core, and takes a heavier closer. The upgrade is worth it for bedrooms off a hallway; less so for a closet.
  • Hollow-core interior doors – the $120 – $250 door. Light, cheap, and fine until a kid slams one and the face delaminates. Most Orinda homeowners use them for closets only.
  • Glass and glazing – a half-lite or full-lite entry with tempered or laminated glass is the single biggest jump in cost. Laminated glass is the fire-hardening choice on the exterior.
  • Hardware – a basic builder-grade knob is fine. A keyed entry set with a matching deadbolt, or a smart lock, runs $150 – $500 in hardware alone and needs a slightly larger bore.
  • Brands – Andersen and Marvin on the exterior premium side; CertainTeed and Owens Corning appear in the wider envelope and roofing scope, not on the doors themselves.

What Door Installation Costs in Orinda, CA

Plan on $650 – $2,400 per opening for a typical interior or standard exterior door installed and trimmed, and $2,800 – $6,500 for a heavy custom or wide exterior unit that needs reframing. A whole-house swap (say eight to ten interior doors plus two entries) usually lands between $6,500 and $14,000.

professional windows & doors service in Orinda, CA

What pushes a job to the low or high end:

  • Opening condition – a straight frame shims in an hour. A racked one from a sloped lot’s foundation movement can double the labor.
  • Door size and weight – a 36-inch standard slab is quick; a 48-inch custom wine-room or workshop door is a two-person, half-day job.
  • Material grade – fiberglass or solid wood versus steel or hollow-core moves the number by $200 – $700 per door.
  • Structural change – widening an opening means a header and a permit. That’s where $2,000 – $4,000 enters.
  • Permit scope – a straight swap usually needs none. A new opening in a bearing wall does. We pull the permits and pass the inspection on the ones that require it.

A written estimate from us lists the door unit, hardware, trim, labor, permit (if any), and disposal, with the price fixed and no change orders for the scope we agreed. The one thing that isn’t included is any hidden rot behind the frame, which we can’t see until demo day; if we find it, you get the number before we proceed.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Orinda Homes Specifically Do to This Job

Orinda is a wooded, hillside suburb, and door work here inherits the same constraints as everything else: steep-slope access, protected oak and redwood canopy, and fire-hardening requirements that don’t apply in Lafayette or Walnut Creek on flatter ground. Exterior door replacements often need an ember-resistant threshold and non-combustible trim on the WUI-facing side, and if the door sits inside a tree-protected zone (common on the lots off Miner Road and Moraga Way), we plan the material staging around the canopy before the first tool comes out. Mid-century ranches from the 1950s – 1970s dominate the housing stock, and their door frames have had sixty-odd years of seasonal movement, so we routinely shim a door a quarter-inch off-plumb to sit flush. In winter we see fog-driven moisture rot at the bottom of the frame on the north side of the ridge; a sill pan on every exterior replacement handles it. For anything wider than a single door, the geotechnical reality of a sloped lot can mean a stamped detail on the permit. If the door is part of a broader entry or siding refresh, that wider project scope sits on our Windows & Doors in Orinda page. Homeowners also often pair this with Garage Conversion ADU in Orinda, where a matching man-door keeps the envelope consistent, or with Cabinets & Countertops in Orinda when an interior remodel is running at the same time. We cover all of Orinda and the neighboring towns, so a single trip is a single trip. If you’re planning the whole envelope, start with our Windows & Doors service.

Serving Orinda, CA – Our Local Coverage Area

We serve Orinda and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked – Door Installation in Orinda

Installers setting a new window and checking it for level

Ready for a Free Door Installation Estimate in Orinda?

Call (833) 700-4611 and a live person picks up, any hour. Tell us the door type, the opening, and roughly when you need it, and we’ll schedule a free on-site estimate with a written, line-item quote. Calls are answered around the clock, and there’s no pressure to book on the spot – you get the number, you decide.

Written by the team at Groundwork Construction Co. of Richmond.

Why Orinda Chooses Groundwork Construction Co. of Richmond

We set the standard for door installation in Orinda.

No Change-Order Surprises

The written quote you sign is the price you pay. Anything we find mid-job gets priced and approved by you in writing before we touch it.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Orinda

Getting your door installation project started is simple.

1

Call or Request a Free Estimate

Tell us about your door installation project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local door installation pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Orinda Customers Say

Trusted by homeowners across Orinda and surrounding areas.

★★★★★

"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."

Laura Bennett
★★★★★

"He pulled the permits himself, scheduled every sub and ran the inspections. I made one decision a week and otherwise stayed out of it, which is exactly what I was paying for."

Robert Sullivan
★★★★★

"Change orders were written down and priced before the work happened, every single time. No surprise at the end."

Keisha Robinson

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
New painted shaker cabinets with an organized deep drawerA remodeled hall bathroom with patterned floor tile and painted wallsA remodeled kitchen with a waterfall island and wood cabinetsA wood double vanity with two mirrors after a bathroom remodelA finished backyard cottage with a small covered porchA new roof with clean valleys and new flashing

More services in Orinda

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Groundwork in Richmond

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Richmond team

A local vetted partner works across Richmond and the towns around it, to the same written standard as every Groundwork job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise

Ready for Door Installation in Orinda?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Orinda.

(833) 700-4611

Request a Free Estimate in Orinda

Tell us about your door installation needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Local Service Coverage
Call Now - 24/7 Dispatch