







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Orinda, CA: What the Job Actually Involves
Replacing cabinets and countertops in Orinda typically runs $14,000 – $45,000 for the full job, takes three to six weeks from demo to final countertop install, and starts with a decision most homeowners don’t expect: whether the existing boxes can stay and just get new doors and a new slab, or whether the layout itself has to change. Cabinet-only work lands around $4,000 – $13,000, and countertop-only work around $2,000 – $6,500. Call (833) 700-4611 for a free on-site estimate and we’ll tell you which side of that range your kitchen is on before anyone touches a cabinet.

How We Run a Cabinet & Countertop Job, Stage by Stage

The sequence matters more than the materials, because a countertop templated too early will not fit. Here’s the order we hold to, and what you decide at each step.
Stage 1: Measure and layout confirmation (day 1, 2 – 3 hours)
We field-measure every wall, check for out-of-square corners (common in Orinda’s mid-century ranch stock), and confirm the layout with you. This is where you lock the footprint: keep the sink and range where they are, or move them. Moving a sink means plumbing relocation; moving a range means a new 240V circuit. Both add cost and time, and both need to be decided now, not after the boxes are ordered.
Stage 2: Order and lead time (weeks 1 – 4)
Stock cabinets arrive in about a week. Semi-custom, which is what most Orinda kitchens use, runs three to five weeks. Fully custom runs eight or more. This is the long pole in the schedule, so we place the order the day you sign off on the layout. You’ll pick door style, finish, and box construction during this window, and we’ll walk you through the trade-offs in the next section.
Stage 3: Demo and prep (2 – 4 days)
Old cabinets and counters come out, we inspect what’s behind them, and we fix what the demo exposes: soft drywall, old shutoff valves, undersized wiring, water damage around the sink base. In Orinda, this is also where we check the wall the cabinets hang on, since hillside homes sometimes have structural quirks. You’ll approve any surprise work in writing before we proceed. Upfront pricing means the number you see is the number you pay for the scope we quoted.
Stage 4: Cabinet install (2 – 4 days)
Boxes go in level and plumb, shimmed and screwed to studs, with filler panels scribed to the wall. Crown and light rail go on last. If you’re adding under-cabinet lighting or a new outlet for a microwave, that rough electrical happens here, before the countertop is templated.
Stage 5: Template, fabricate, install the top (7 – 14 days)
We template the finished cabinets with a physical or digital jig, the slab shop cuts and polishes, and the top comes back and gets set. Sink and faucet go in the same visit. Total elapsed time from demo to a usable kitchen: three to six weeks, with the countertop fabrication window being the part homeowners most often underestimate.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Two decisions drive most of your budget: the cabinet box and the countertop surface. Here’s the honest version of each.
- Stock vs. semi-custom cabinets. Stock (about $4,000 – $8,000 installed for a typical Orinda kitchen) comes in fixed sizes and limits your layout. Semi-custom ($8,000 – $13,000) lets you hit the ceiling line and work around a window or a soffit, which matters in these older homes. KraftMaid is our workhorse for semi-custom because the door styles fit the mid-century and craftsman homes here.
- Quartz vs. natural stone. Quartz runs $60 – $95 per square foot installed and doesn’t need sealing, so it holds up to a busy household. Granite and marble cost more and need periodic sealing, but they bring a look quartz can’t fake. Cambria quartz is a common pick in Orinda kitchens where the counter is the visual anchor.
- Slab thickness and edge profile. Standard is ¾-inch or 1¼-inch; a thicker slab with a mitered edge reads as high-end and adds cost. A simple eased edge keeps the budget clean.
- Refacing instead of replacing. New doors and drawer fronts on sound existing boxes runs a fraction of a full replacement and saves a week of demo. It’s the right call when the cabinet layout already works and the boxes are solid.
- Sink and faucet. An undermount sink requires the countertop fabricator to cut and polish the opening, so it has to be specified before templating. A drop-in sink is more forgiving and cheaper to change later.
What Cabinets & Countertops Costs in Orinda, CA
Most full cabinet and countertop jobs in Orinda land between $14,000 and $45,000. Here’s where the line items sit:
| Line item | Typical range |
|---|---|
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Full cabinets & countertops job | $14,000 – $45,000 |
Five variables push a job toward the low or high end. First, size: a galley kitchen sits near the bottom, an L-shaped kitchen with an island near the top. Second, existing condition: if demo exposes water damage or outdated wiring, that’s added scope. Third, relocation: moving a sink, range, or wall adds plumbing, electrical, or framing work, and in some cases a permit. Fourth, material grade: stock cabinets and a standard quartz can keep the number down; semi-custom boxes and a thick natural-stone slab push it up. Fifth, whether you’re also replacing appliances or a backsplash, which are separate scopes but usually get decided in the same week.

Every written estimate itemizes cabinets, countertop material and fabrication, demo and haul-away, and any plumbing or electrical allowances. What it doesn’t include unless we list it: appliance costs, structural changes discovered during demo (quoted and approved before we proceed), and permit fees where a permit is required. No-hassle upfront pricing on this page means exactly that.
See the difference
Before
After
Before
After
Before
AfterWhat Orinda Homes Specifically Do to This Job
Orinda is a wooded, hillside suburb, and that shapes even a cabinet job in ways it wouldn’t in a flatter town. The housing stock is dominated by mid-century ranch homes and custom builds from the 1950s through the 1970s, and many sit on sloped lots under mature oak and redwood canopies. If your project touches a wall or changes the footprint, you may be dealing with Orinda’s tree preservation rules and hillside grading standards, and occasionally an arborist report or geotechnical review before drawings, depending on what the work involves. That’s why we ask early whether the layout is staying put.
Fire hardening is the other local reality. Orinda’s hot, dry summers and seasonal Diablo winds put much of the town in the wildland-urban interface, so homeowners routinely ask for ember-resistant vents, non-combustible siding, and Class A assemblies as part of a larger kitchen upgrade. Those aren’t cabinet decisions, but they affect the timeline if your project expands. We pull permits and pass inspections on the structural, electrical, and plumbing scope, and we’ll tell you plainly when a job needs one and when it doesn’t.
Serving Orinda, CA – Our Local Coverage Area
We serve Orinda and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Cabinets & Countertops in Orinda

Most jobs take three to six weeks from demo to final install, and the biggest variable is cabinet lead time. Semi-custom cabinets run three to five weeks to arrive, and countertop fabrication adds seven to fourteen days after templating. Call (833) 700-4611 to get a realistic schedule for your kitchen.
Usually no, if you’re keeping the layout, the plumbing, and the electrical where they are. A straight swap of cabinets and countertops is cosmetic. If you move a sink, add a circuit, or take down a wall, the scope crosses into permitted work. We’ll tell you which side of that line your project falls on during the estimate.
Yes, and it’s the most common way we do it. If the sink and range stay in place, there’s no plumbing or electrical relocation and the job stays fast and predictable. Moving them is possible but adds cost, time, and in some cases a permit.
A full job typically runs $14,000 – $45,000, with cabinet-only work at $4,000 – $13,000 and countertop-only work at $2,000 – $6,500. Material grade, layout size, and whether anything moves are the biggest swing factors. Call (833) 700-4611 for an exact quote – estimates are free.
Every cabinet and countertop job we do is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in the residential construction space, and it’s backed in writing.
Get a Free Estimate for Cabinets & Countertops in Orinda
Call (833) 700-4611 and a live person answers, day or night, to book a free on-site estimate. We’ll measure your kitchen, confirm whether the layout stays or moves, and hand you a written line-item quote with the number you can expect to pay. Projects over $10,000 get $1,000 off, and 0% financing for 18 months is available. If this is part of a full Kitchen Remodeling in Orinda, we scope both together; if it’s paired with Garage Conversion ADU in Orinda or a New Detached ADU in Orinda, we sequence the work so neither stalls the other.
If you’re still deciding how far to take the project, our Kitchen Remodeling service covers the wider scope, and you can see the full range of what we do across Orinda.
Written by the team at Groundwork Construction Co.












