Last updated November 18, 2026








Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Windows & Doors Maintenance Schedule: What to Do and When
Weatherstripping has a lifespan of 5 to 7 years. Almost no homeowner replaces it on schedule, and almost every homeowner pays for that gap in energy bills and eventual frame rot instead. Windows and doors are the only parts of your home that move every single day, and they wear out on predictable schedules. This guide lays out a full annual maintenance plan for windows and doors, broken down by task type and timed to Richmond’s wet winters and dry summers. You’ll learn what to lubricate, when to re-caulk, how to check weep holes, which maintenance steps protect your manufacturer warranty, and how to spot the difference between a well-kept window and a neglected one. It’s the one-page plan that prevents most of the replacement costs we see across Richmond.
Quick Answer
A windows-and-doors maintenance plan runs on two inspection cycles a year: one in mid-fall before Richmond’s rainy season and one in late spring after it. Each cycle covers five tasks – lubrication, weatherstripping inspection, caulk integrity, hardware function, and drainage channel clearing (weep holes). Add a deep annual service in spring that includes a full caulk check and hardware tightening, and you’ll prevent the majority of premature window and door replacement costs. Manufacturer warranties usually require documented maintenance, so keep notes and photos.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Table of Contents
- Why Windows and Doors Need a Written Schedule
- How Richmond’s Climate Sets a Twice-a-Year Rhythm
- Spring Maintenance Checklist (Post-Rainy Season)
- Fall Maintenance Checklist (Before the Rains)
- Weep Holes: The Inspection Almost Nobody Does
- The Maintenance Steps That Keep Your Warranty Valid
- What a Well-Maintained 10-Year-Old Window Looks Like
- When to Call a Professional
- Frequently Asked Questions
Why Windows and Doors Need a Written Schedule
A window isn’t a static object. Every time you open it, the weatherstripping compresses, the sash slides along its track, and the hardware absorbs a tiny amount of stress. Do that hundreds of times a year and the wear is very specific and very predictable. Weatherstripping flattens and loses its rebound in about 5 to 7 years. Rollers on sliding doors wear at their contact points. Hinges accumulate grit. Caulk shrinks and pulls away from the frame in 7 to 10 years.
We’ve walked through hundreds of Richmond homes where the homeowner is surprised the windows are “failing.” They aren’t failing. They’re worn on a schedule nobody tracks. The difference between a 10-year-old window that’s still tight and one that’s leaking air is rarely the window itself; it’s whether anyone followed a maintenance rhythm.
Here’s what a written schedule actually prevents:
- Weatherstripping failures that cost you heat in winter and AC in summer – and let moisture into the frame.
- Caulk failure that lets wind-driven rain into wall cavities, which is the leading cause of frame rot we see around Richmond.
- Hardware seizing on sliding doors and casement windows, which typically forces a full replacement of a part that a quarter-turn of lubricant would have protected.
- Blocked weep holes that trap water behind vinyl and aluminum frames and rot them from the inside out.
One page. Two inspections a year. That’s the whole system. We recommend printing a checklist and taping it to the inside of your garage door or utility closet, because the schedule only works if you actually follow it.
How Richmond’s Climate Sets a Twice-a-Year Rhythm
Richmond sits on the east shore of San Francisco Bay, and that geography matters for your windows. You get wet, wind-driven winters and dry, sunny summers, plus salt-laden air in neighborhoods closer to the water like Point Richmond and Marina Bay. That combination is a lot harder on seals and caulk than the inland advice you’ll read online.
Generic maintenance guides written for Sacramento or the Central Valley usually suggest one annual inspection in spring. That’s too little for Richmond. Here’s why:
- Winter rain drives water sideways. Bay-facing windows on the west side of a Richmond home take wind-driven rain directly against the frame for months. Caulk lines and weatherstripping take the hit.
- Summer sun bakes the seals flat. Dry Contra Costa summers pull moisture out of caulk and weatherstripping, which shrinks and cracks them. A single annual check misses the moment they reopen.
- Salt air eats hardware. Homes in Point Richmond, Marina Bay, and along the Richmond waterfront see more corrosion on hinges, lock sets, and track hardware than homes in El Sobrante or Kensington. Those parts need closer attention.
- Spring is a wet season here. Unlike inland California, Richmond often gets rain into April and May, so the “post-winter” inspection really needs to happen after that rain, not in early March.
That’s why our rhythm for Richmond homes is: a fall inspection in October or November (before the rains), and a spring inspection in May or June (after the last wet weather). That’s two cycles, matching the two halves of Richmond’s climate. Inland maintenance advice with one annual check just doesn’t hold up here.
Spring Maintenance Checklist (Post-Rainy Season)
The spring inspection is where you assess winter damage. Here’s the full sequence, in order. Run it once every May or June.
- Walk the exterior. Check every window and door frame from the outside. Look for gaps in caulk, cracked sealant, or signs of water damage at the frame-to-wall joint. This is the fastest way to spot winter damage.
- Check weatherstripping. Open each window and inspect the strip on the frame and the sash. Pinch it gently. It should spring back within a second. If it stays compressed or looks cracked, replace it – this is the single highest-impact spring task.
- Inspect caulk integrity. Run a finger along each caulk line. Loose caulk will lift. Cracks or gaps mean water can get behind the frame. Re-caulk any failed sections with a high-quality exterior silicone or polyurethane sealant.
- Lubricate hardware. Apply a small amount of silicone-based lubricant to hinges, sliding-door tracks, and casement operators. Skip the WD-40 on tracks; use actual lubricant, not solvent, so it doesn’t attract dust.
- Test hardware function. Open and close every window and door fully. Every lock, latch, and handle should engage smoothly and completely. Fix sticking hardware now before it becomes a stripped screw hole.
- Clear weep holes. On every window, find the small drainage slots on the bottom of the frame and clear them with a paperclip, pipe cleaner, or compressed air. This is the task almost nobody does – see the dedicated section below.
- Photograph everything. Date-stamped photos of your inspection become your warranty record. Take five minutes to shoot close-ups of each caulk line and each frame.
Two of those tasks – caulk and weep holes – are the ones that determine whether your window’s frame survives the next decade. Don’t skip them. The others catch problems before they compound.
Fall Maintenance Checklist (Before the Rains)
The fall inspection is where you protect the home for winter. Run it every October or November, before Richmond’s first big storm.
- Re-check caulk. Summer heat and sun dry-shrink caulk faster than winter moisture does. Walk every line and top up any gap that’s opened since spring. Pay special attention to windows facing the Bay.
- Replace weatherstripping where needed. If the spring inspection flagged a strip that’s borderline, replace it now. Don’t wait until winter when you need the seal.
- Check storm windows and screens. If you have removable storm windows or screen panels, make sure they’re installed and every latch is set. Check for holes, tears, or bent frames.
- Clear drainage channels. Remove leaf litter, dirt, and debris from track channels on sliding doors and windows. Debris holds water, and held water rots the frame.
- Lubricate again for winter. Re-oil hinges and sliding hardware. Cold-weather hardware that’s dry will stick and you’ll force it – which is the fastest way to break it.
- Check door sweeps and thresholds. On exterior doors, check the sweep at the bottom of the door. It should touch the threshold all the way across. A failed sweep is a 1/4-inch gap that lets in cold air and moisture.
- Date and file your notes. Log what you found and what you did. This becomes your warranty-maintenance paper trail.
The fall cycle is the tighter of the two because winter damage comes fast. A 1/8-inch gap in caulk can let in enough water over one storm season to soften a sill. Fixing it in November costs a tube of sealant. Replacing the sill costs hundreds.
Weep Holes: The Inspection Almost Nobody Does
Weep holes are the small slots or slots-with-covers on the bottom of a window frame, usually no more than 1/4-inch across. They exist to let any water that gets inside the window assembly drain out. They’re on virtually every vinyl and aluminum window built since the 1980s, and almost no homeowner has ever cleared one.
When weep holes clog – with paint, dust, pollen, spider webs, or the stucco and siding debris that accumulates on Richmond homes – water collects inside the frame instead of draining. That water sits behind the sash. Over a season or two, it rots the sill and the frame’s interior, and by the time you see it as staining or bubbling paint, the damage is already deep inside the wall.
We’ve opened up Richmond windows where the interior sill was rotted through because the weep hole had been sealed with paint by a prior painter. The homeowner had never heard of weep holes. The repair cost was hundreds per window instead of a five-minute clearing.
How to inspect them:
- Look, don’t pry. Shine a light down into each hole. If you can see a clear slot all the way through, it’s clear.
- Clear with a paperclip or compressed air. Run a bent paperclip through the slot, or blow compressed air through. Clear the slot, don’t scrape it.
- Never seal them. This is the most important rule. If you’re painting or applying sealant near a window, mask the weep holes so they stay open. Some painters seal them “to stop drafts.” That’s the exact wrong move – it traps water and destroys the frame.
- Check the covers. Many windows have small snap-in covers over weep holes to keep debris out. Make sure they’re present and pointing outward.
- Watch for water after a storm. If you see streaks or drips on the frame after rain, the drain path is blocked or the frame has shifted. That’s a call-the-pro moment.
Weep holes are the single most overlooked maintenance item we see on Richmond homes. If you check nothing else in this guide, check these twice a year.
The Maintenance Steps That Keep Your Warranty Valid
Here’s what most homeowners don’t realize: window and door manufacturer warranties – including those on major brands we install, like Andersen and Marvin – are typically conditional. They cover defects in materials and workmanship, not damage caused by inadequate maintenance. If a warranty claim ends in a dispute over whether water intrusion was the manufacturer’s fault or the homeowner’s, the difference between a covered claim and an uncovered one is usually your maintenance record.
The maintenance steps most often referenced in warranty claims:
- Documented caulk inspection and re-caulking. If you claim a defective seal and the installer or manufacturer can show the caulk was never maintained, the claim is often denied.
- Weep hole clearance. Many window warranties explicitly exclude rot caused by blocked weep holes. This is the single most common denial reason we see.
- Weatherstripping replacement. Weatherstripping is usually considered a consumable – it’s expected to be replaced on a schedule. It’s often not covered by warranty, and failing to replace it is not.
- Hardware lubrication. Most hardware warranty claims require documentation that the hardware was properly maintained, not just installed.
- A written log. A simple dated list with a photo per task is worth more than any verbal claim. Keep it in a folder.
In our experience, the difference between a warranty that pays out hundreds and one that gets denied often comes down to whether the homeowner kept a written maintenance record. The claim is usually decided on evidence, not sympathy. Treat your maintenance log as part of the warranty.
What a Well-Maintained 10-Year-Old Window Looks Like
One of the hardest things as a homeowner is knowing what “good” looks like on an aging window. We’ve benchmarked hundreds of Richmond homes, and here’s the side-by-side of a 10-year-old window that was maintained on schedule versus one that wasn’t. Use it to score your own.
- Weatherstripping: The maintained window’s strip still springs back when pinched. The neglected one is flat, cracked, or rubbery and doesn’t rebound – it lets air in and out freely.
- Caulk lines: The maintained window’s caulk is still tight and continuous. The neglected one shows cracks at every corner and gap at the wall joint.
- Hardware: The maintained window’s locks engage with a light click. The neglected one requires two hands, a wiggle, and sometimes a slam.
- Weep holes: The maintained window’s holes are clear and show no staining inside. The neglected one has debris or staining, and the sill may show soft spots under the frame.
- Frame condition: The maintained frame is straight with no visible rot or paint bubbling. The neglected frame may show cracked paint at the sill, soft wood, or dark staining from trapped water.
- Energy performance: The maintained window still feels tight when closed – no draft at the edges. The neglected one shows visible draft with a tissue test at every joint.
- Sliding action: The maintained sash slides easily, one finger. The neglected sash requires a shove.
Run the same seven checks on your own windows. If three or more are on the neglected side, you’re already replacing parts most homeowners never touch – and you’ve likely shortened the window’s lifespan by several years. A window built to last 25 to 30 years can be lost in 15 without maintenance.
See the difference
Before
After
Before
After
Before
AfterCommon Mistakes to Avoid
- Sealing weep holes to stop drafts. We see this in Richmond constantly, especially after a paint job. Sealing the drainage slot traps water inside the frame and rots the sill from the inside. It’s the single costliest mistake on this list.
- Using WD-40 on sliding door tracks. It’s a solvent, not a lubricant. It cleans the track and then attracts dust, which grinds the rollers down. Use a dry silicone or Teflon spray instead.
- Skipping the caulk check because the window “looks fine.” Caulk fails from the inside out; you can’t see the crack until water has already gotten behind it. Check the physical line, not the appearance.
- Pushing a stuck sliding door with force. If a sliding door needs two hands and momentum, something is misaligned or the roller is worn. Forcing it strips the hardware or cracks the glass seal. Fix the cause, not the symptom.
- Replacing weatherstripping “when it feels old” instead of on schedule. Weatherstripping has a fixed 5-to-7-year lifespan regardless of how it feels. If you haven’t replaced it in that window, replace it – the seal is gone even if you can’t feel it.
- Assuming installed windows are the manufacturer’s full responsibility. Most warranties cover materials, not installation or maintenance. If the frame leaks because the caulk was never maintained, it’s likely on you, not Andersen or Marvin.
- Ignoring Bay-facing windows in Point Richmond and Marina Bay. Salt air and wind-driven rain hit these homes harder than inland Richmond addresses. They usually need double the hardware-lubrication attention.
- Not keeping a maintenance log. A written log with photos is your best tool in a warranty claim. Without it, warranty disputes usually go against the homeowner.
When to Call a Professional
Most maintenance in this guide is a homeowner task: lubrication, weatherstripping, caulk touch-ups, weep hole clearing. It’s safe and inexpensive. But some signs mean the window or door has moved beyond maintenance and needs a professional inspection. Call if you see:
- Soft spots or rot in a sill, frame, or wall below a window – water has already been trapped inside.
- A window or door that has shifted out of square (you can see daylight at the frame edge, or the sash scrapes at the top).
- Fogging between glass panes, which means the sealed unit has failed and needs replacement.
- Draft at the frame edge in multiple windows at once – the weatherstripping and caulk can’t be the whole story if several windows fail at once.
Groundwork Construction Co. of Richmond offers free estimates on window and door replacement, repair, and inspection across Richmond. We carry premium brands – Andersen, Marvin, Pella – backed by our 730-Day Done Right Promise. Call (833) 700-4611 and a live person will answer, day or night, and we’ll schedule your free estimate.
Frequently Asked Questions
Twice a year in Richmond: once in fall (October or November, before the rainy season) and once in spring (May or June, after the last wet weather). That’s because Richmond’s climate – wet Bay-driven winters and dry Contra Costa summers – wears on seals and caulk in two distinct phases. Inland maintenance advice with one annual inspection misses the second phase. If your home is closer to the water in Point Richmond or Marina Bay, add hardware lubrication in mid-summer because salt air and wind-driven rain accelerate wear.
Weatherstripping typically lasts 5 to 7 years, regardless of how often you open the window. It’s a consumable part, and it should be replaced on a fixed schedule even if it looks okay. Once it’s flat, air and moisture get past it and the frame takes the damage. On Richmond’s Bay-facing windows, expect the low end – closer to 5 years. Plan and budget to replace it on that schedule rather than when it becomes visibly broken.
You can and should clear them yourself – it’s a five-minute job with a paperclip or compressed air – and don’t let anyone seal them. If you’re having windows painted, mask the weep holes first. If you see staining near the weep holes or feel soft spots in the sill under the frame, that’s rot from blocked drainage – call a professional window contractor in Richmond for an inspection. Groundwork offers free estimates; call (833) 700-4611.
Improper maintenance is the most common reason a manufacturer’s window warranty gets denied, followed by installation defects or failing to clear weep holes. Defective material is covered; damage caused by blocked weep holes and dry caulk is usually not. Before you file a claim on an Andersen, Marvin, or Pella window, pull out your maintenance log and confirm you have dated records of caulk checks and weep-hole clearings. If you don’t have a log, the claim is often disputed and denied.
Yes, especially in Richmond. Exterior windows and doors take the full climate load – wind-driven rain, sun exposure, and salt air – so they need both the fall and spring checks and caulk inspection. Interior windows (usually between rooms) and interior doors need only hardware lubrication, weatherstripping, and occasional paint touch-up on a single annual cycle. Don’t spend time caulking interior windows – that’s not where failure happens.
A properly maintained window should reach 25 to 30 years before it needs replacement. A neglected window is often ready for replacement in 15 to 20 years – the same window, but 10 to 15 years of shortened lifespan. On the benchmark side, if three or more of the seven checks in the “What a Well-Maintained 10-Year-Old Window Looks Like” section fail, you’re on the shortened path already.
The Bottom Line

Windows and doors wear on a schedule, and you can either follow it or pay for it later. The system is two inspections a year – fall and spring – five tasks per inspection: lubricate, inspect weatherstripping, check caulk, test hardware, clear weep holes. Add a deep annual caulk check and keep a dated log. In Richmond, that rhythm also needs to account for Bay-facing wind-driven rain, salt air, and dry summers, which is why the fall and spring cycle fits better than inland advice. Run the seven-check benchmark on your own windows once a year. If something’s already failed, we’re here to help. Groundwork Construction Co. of Richmond is a Richmond home construction partner with the 730-Day Done Right Promise on every job. We handle windows and doors on the same team that installs Driveway & Pavers in Richmond, Fence Installation in Richmond, and Home Additions & ADU in Richmond. Call (833) 700-4611 for a free estimate – a live person answers 24/7.
Written by the team at Groundwork Construction Co. of Richmond.


