







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Emeryville, CA: What the Job Really Involves
New cabinets and countertops in Emeryville, CA typically run $14,000 to $45,000 as part of a kitchen project, and the cabinet-and-counter swap itself usually takes two to three weeks from demo to final caulk. Call (833) 700-4611 for a free on-site estimate. The number you see is the number you pay, backed by our 730-Day Done Right Promise. Tight townhome galley kitchens and live-work loft layouts are what we see most here, and both reward careful measuring over fast ordering.

How We Sequence a Cabinet and Countertop Job

Cabinet and countertop work is a measuring-and-sequencing job more than a building job. Get the order right and the kitchen closes up clean. Get it wrong and you’re waiting six weeks on a slab that doesn’t fit. Here’s the order we run.
- Day 1: Site measure and field verification. We template the actual room, not the drawing. In Emeryville’s older warehouse conversions and 1990s live-work lofts, walls are rarely plumb and floors rarely level, so we note every out-of-square corner and where the counter will need a filler or a scribe. You approve the layout and cabinet door style.
- Days 2 – 3: Demolition and prep. Old cabinets come out, we cap the plumbing and electrical at the wall, and we check the subfloor and the wall behind. If a previous owner left a surprise (galley kitchens in mid-century units often hide a chase or a load-bearing post mid-run), you hear about it before we build, not after.
- Days 4 – 7: Cabinet install. Base and wall boxes go in level and shimmed. You’ve already locked the door style and hardware by now; this is the stage where swapping the layout gets expensive, so decisions come early.
- Days 8 – 9: Countertop template. The fabricator measures the installed cabinets, not the room. This is why countertops always follow cabinets, never lead them. You pick the edge profile and the sink cutout location here.
- Days 10 – 21: Countertop fabrication, install, and finish. Stone and quartz fabrication takes one to two weeks. The slab lands, we set the sink and faucet, caulk the seams, and do the final walkthrough with you.
Most of the calendar time is fabrication and material lead time, not labor. Order the cabinets first, and the rest falls in line. If the cabinets and countertops are part of a full Kitchen Remodeling in Emeryville, we sequence this crew around the other trades so nobody’s waiting on a plumber while the cabinets sit in the garage.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Actually Make
Two decisions drive most of the cost and most of the regret: cabinet construction and countertop material. Here’s the honest trade-off on each.
- Cabinet box construction. Plywood boxes hold up to moisture and last longer than particleboard, and the price difference is real but modest. For a rental or a flip, particleboard is fine. For a kitchen you’ll live in for 15 years, pay for plywood.
- Door style and finish. Painted MDF and shaker styles are the budget-friendly pick and read clean; solid wood and thermofoil cost more and thermofoil can peel at the edges near a dishwasher. KraftMaid is a solid mid-tier pick we use often because the finish holds up.
- Countertop material. Quartz (Cambria is the brand we reach for) resists staining and needs no sealing. Granite is harder and more forgiving of hot pans but needs periodic sealing. Laminate is the budget option and shows its age fastest.
- Edge profile and thickness. A standard eased edge on 3cm slab is the value pick; a built-up 6cm edge or a waterfall end adds cost for a look, not durability.
- Sink and faucet. An undermount sink requires the fabricator to cut and polish the hole, which adds labor. A drop-in sink is cheaper but leaves a rim that traps grime. Kohler faucets are priced in the mid range and hold up.
We don’t list every option we carry on a page; we walk the showroom samples with you at the estimate and you pick from what fits your budget and your use.
What Cabinets & Countertops Costs in Emeryville, CA
Expect $14,000 to $45,000 for cabinets and countertops in Emeryville, and the spread is wider than most homeowners expect because a tight galley in a live-work loft and a full kitchen in a newer mid-rise tower are not the same job. Cabinet installation alone runs $4,000 to $13,000; countertop installation runs $2,000 to $6,500; a kitchen island adds $3,000 to $10,000 if you’re building one.
Four variables push a job to the top of that range:
- Size and layout. A short galley with six boxes is the low end; an L-shape with an island and a peninsula is the high end.
- Existing condition. Water damage under a sink, out-of-square walls in an older conversion, or a floor that needs leveling all add labor before a single cabinet goes in.
- Relocating plumbing or electrical. Moving a sink or a range circuit is a different scope from swapping boxes in place. If the plumbing stays put, you save real money. If it moves, that’s a permit and a trade.
- Material grade. Particleboard and laminate at the low end; plywood boxes, quartz, and a built-up edge at the high end.
Your written estimate itemizes cabinets, countertops, labor, demolition, and disposal line by line, so you can see exactly where the money goes. What typically isn’t included: moving gas or plumbing lines, structural changes, and appliance purchases. Permits, where the scope requires one, get pulled and inspected. Upfront pricing, no surprises on the back end. Call (833) 700-4611 for a written quote.

See the difference
Before
After
Before
After
Before
AfterWhat Emeryville Homes Specifically Do to This Job
Emeryville’s housing stock is a patchwork, and it changes the cabinet job in ways a greenfield suburb doesn’t. Around the Powell Street corridor and the older live-work buildings off Bay Street, you’re often working in a 1990s or 2000s loft where the “kitchen” is a wall of boxes against a concrete column, and the wall behind isn’t framed the way a residential wall should be. The mid-century and WWII-era industrial conversions are worse: the walls are out of plumb, the floor may sit on bay fill, and the plumbing chase runs where a standard cabinet run would go. We check for that before we order. Cabins in the ZIP codes 94662 and 94608 sit on low-lying bay fill, so a kitchen that flooded once from winter rain may have water-damaged toe kicks or a swollen subfloor under the dishwasher, which shows up the moment you pull the old boxes.
Permitting here runs through a city that’s dealt with heavy industrial cleanup and layered entitlements, so a cabinet-and-counter job that stays in place is usually a straightforward interior scope, while relocating a sink or a gas line may trigger a plumbing permit and an inspection. We build the schedule around that. If you’re also converting a garage or building a detached unit, homeowners often pair this with Garage Conversion ADU in Emeryville or New Detached ADU in Emeryville work, and we coordinate the trades across both. Our kitchen remodeling service covers the wider scope if you’re planning more, and we handle Emeryville and the surrounding area.
Serving Emeryville, CA – Our Local Coverage Area
We serve Emeryville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Cabinets & Countertops in Emeryville

Plan on two to three weeks from demo to final walkthrough. Most of that is countertop fabrication and cabinet lead time, not labor. Call (833) 700-4611 and we’ll give you a schedule with your estimate.
Usually not if you’re replacing cabinets in place and keeping the plumbing and electrical where they are. Permits come into play when you move a sink, a gas line, or a circuit. We tell you up front which category your job falls into and pull the permits where the scope requires one.
Yes, and that’s how most of our Emeryville cabinet jobs run. Keeping the sink and range in place keeps the cost at the low end of the $14,000 to $45,000 range and skips the permit. Moving either one is a different scope, and we price it separately.
The range is $14,000 to $45,000, driven mostly by size, existing condition, material grade, and whether plumbing or electrical moves. Cabinet install alone is $4,000 to $13,000; countertops $2,000 to $6,500. Call (833) 700-4611 for an exact written quote, free and on site.
Every job is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. That applies to the cabinet install and the countertop set, not just the materials. Calls are answered by a live person 24/7 if something comes up after the crew leaves.
Get a Free Cabinet and Countertop Estimate in Emeryville
Call (833) 700-4611 to schedule a free on-site estimate for cabinets and countertops in Emeryville. We’ll measure the actual room, walk the samples with you, and hand you a written line-item quote with fixed pricing and no change orders. You’ll know exactly what your kitchen costs before we touch a cabinet. Financing at 0% for 18 months and $1,000 off projects over $10,000 are available.
Written by the team at Groundwork Construction Co.












